Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Clovis, CA
Clovis, CA isn’t Fresno. The streets are wider, the lots are bigger, and a surprising number of homes sit behind gates: ranch-style properties on the east side, newer builds near Harlan Ranch, and the sprawling estates off De Wolf Avenue where gate openers work hard in the Central Valley heat. Calder Gate Repair handles all of it, from a sticking driveway gate to a swing gate opener that quit at the worst possible moment. Our crews work throughout Clovis and we’re one call away at (903) 417-0793, with a live person answering no matter the hour.
Why Clovis Homes Are Different
Clovis summers regularly push past 100 degrees, and that heat is rough on gate hardware. We see opener control boards that overheat, plastic gear assemblies that strip under load, and powder-coated steel gates that bake in the direct sun off Herndon and Fowler Avenues. Homes in older pockets like the Tarpey Village area often have heavier, steel-framed gates hung on posts that settle over time, while newer communities like Loma Vista and the neighborhoods around Clovis Community Medical Center tend toward lighter aluminum gates with more sophisticated opener electronics.
The soil matters too. Clovis sits on the eastern edge of the San Joaquin Valley, where clay-dominant ground expands and contracts with moisture. That movement slowly tilts gate posts, which throws off alignment and makes a gate bind against its track or drag on the driveway. It’s one of the most common reasons a Clovis gate stops mid-cycle. Clovis also has active HOA communities that require timely gate repairs for curb appeal and security; we quote written prices up front so a repair stays predictable.
Our Main Clovis Services
Most Clovis calls start with one of two problems: a gate that won’t open or a gate opener that makes noise but does nothing useful. Here’s what each job involves.
Gate Repair in Clovis
A sagging gate, a bent hinge, a wheel that jumped its track, a post that shifted after last winter’s rains. Our Clovis gate repair work is hands-on: we re-align frames, replace rusted hardware, weld broken sections where needed, and set the gate back to closing smoothly. Because Clovis soil shifts with the seasons, we check post stability on every call; not just the visible break. Same-day appointments are often available, and every repair carries our 365-Day Done Right Promise in writing. Read more about Gate Repair in Clovis.
Electric Gate Repair in Clovis
Electric gates add convenience and a real security layer to a Clovis home; when a capacitor blows or a power surge takes out the transformer, the gate becomes a dead stop. We diagnose the full circuit: power supply, wiring runs from the house, safety sensors, the control board, and the motor itself. Clovis power flickers during summer brownouts, and sensitive opener boards don’t always survive that. We test everything before recommending a repair or replacement. See Electric Gate Repair in Clovis for the full breakdown.
Gate Opener Repair in Clovis
Gate openers are the part of the system that fails most often in Clovis, and summer heat accelerates it. We service the opener mechanism itself: gear replacement, limit switch adjustment, remote programming, receiver boards, and full opener swaps when the repair math doesn’t make sense. Because we stay factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we’re usually able to source the right part on the first trip. Visit Gate Opener Repair in Clovis for details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Clovis
We work on the openers Clovis homeowners actually have: LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and the rest of the major brands. Our vans carry common control boards, remotes, and gear kits for these systems, which means we finish most Clovis jobs in a single visit instead of one trip to diagnose and another to return with a part. Here’s a deeper look at our brands.
Pricing for Gate Company in Clovis, CA
Here are the price ranges Clovis homeowners should expect for the most common gate jobs. These figures are for labor before parts; parts are quoted separately and confirmed in writing before any work begins.
| Service | Typical range in Clovis |
|---|---|
| Gate repair labor (standard) | $120 – $260 |
| Gate opener repair labor | $140 – $320 |
| Electric gate troubleshooting | $100 – $220 |
| Limit switch replacement | $90 – $200 |
| Remote programming or replacement | $60 – $140 |
| Gear or sprocket replacement | $130 – $290 |
| Hinge replacement (single gate) | $80 – $180 |
| Welding repair (small to medium) | $150 – $350 |
What pushes a Clovis quote higher is usually the gate’s weight and post condition. A heavy steel gate on a shifted post takes more time to correct than a light aluminum one, and that’s the honest difference. Whatever the number, it’s on paper before we touch a bolt. The price agreed at the door is the price on the invoice.
Neighborhoods We Serve in Clovis
We work in every corner of Clovis, from the established streets near Old Town to the newer subdivisions pushing east and northeast. Typical response time is under 90 minutes for urgent gate failures within Clovis city limits.
- Old Town Clovis and the historic district
- Tarpey Village area
- Loma Vista
- Harlan Ranch
- Neighborhoods along De Wolf Avenue and Leonard Avenue
Service Area – Cities Near Clovis
Our Clovis crews also cover nearby Central Valley communities. If your gate needs attention and you live just outside the city, browse the area pages for Fresno, TX, Sanger, TX, Fowler, CA, and Madera, CA. Each page covers local conditions and pricing for that city.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Clovis
In most cases, yes. We run local crews in the Clovis area and keep urgent slots open for gates that won’t close or won’t open. For genuinely stuck gates we can usually get to you within 90 minutes, and the estimate is always free.
Most HOAs only require approval for a gate’s appearance, not a mechanical repair. Fixing an opener, replacing a hinge, or re-aligning a track rarely needs HOA sign-off. If you’re replacing an entire gate with a new style, check with your board first.
No. We provide free, written estimates. A technician will assess the gate, explain what’s wrong in plain language, and leave you with a written price. That’s the number we honor when the repair is approved; no add-ons at the end.
All of them, from the neighborhoods off Shaw Avenue in the north to the subdivisions along Herndon Avenue in the south, and everything east of Highway 168. If you’re inside Clovis city limits, we’ll come out. For Clovis-area towns, see the service area links above.
Ready for a straight answer? Call Calder Gate Repair at (903) 417-0793. Nico and our Clovis-based crew answer live, give you a clear arrival time, and put every price in writing before the work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Clovis Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.