Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Clovis
A gate that won’t open, sags, or reverses on its own is more than annoying in Clovis – it’s a security gap and a liability. Most gate opener repairs in Clovis run $180 to $340 before parts, with hinge and post work typically landing between $250 and $600 depending on footing condition. Calder Gate Repair sends a background-checked, uniformed technician to your Clovis property with a live, trackable arrival time, not a four-hour window. Call (903) 417-0793 and a real person answers, 24/7. Every job gets a written price before work starts and the 365-Day Done Right Promise in writing.
Why Calder Gate Repair Is Clovis’s Preferred Gate Repair Company
Clovis homeowners keep calling us back for one reason: we diagnose the root cause before quoting a repair. The Gate Repair team we dispatch to Clovis trains on nine major opener brands and carries parts for Linear, Viking, Ghost Controls, and DoorKing on the truck. That means fewer return trips and faster fixes on gates from Harlan Ranch to the Old Town corridor.
Our techs know Clovis’s housing stock. Eastside tracts built in the 1970s and 1980s have different gate loading and footing conditions than newer developments south of Shaw Avenue. A written guarantee comes with every repair. If the fix fails within 365 days, Calder returns at no charge. That’s the Done Right Promise, and it’s stated on paper before you sign anything.
We’re part of the Relay Home Co. family, founded in 2009. Each location is independently owned and operated, and every Clovis job falls under The Relay Standard: a live arrival time, before-and-after photos, and a digital invoice you pay from a link. No phone tag, no vague promises.
Driveway Gate Repair in Clovis
Driveway Gate Repair in Clovis usually comes down to one of three things: an opener that’s lost its travel limits, a panel that’s sagging because the hinge post shifted, or a power run that was never dedicated to the gate. On older eastside streets where front setbacks are shallow, a swing gate operator often gets squeezed against the property line. We measure clearance before quoting an operator, because a short arm throw in those situations means a replacement, not a repair. Most driveway gate opener repairs in Clovis run $180 to $340 before parts.
Operator Limit and Travel Reset
When a gate opens too far, slams, or stops a foot short, the limit switch – the small sensor that tells the gate when to stop – has likely drifted or failed. We reset travel, re-test the safety photocell, and confirm the gate reverses on contact. That last step is not optional. A swing gate that won’t reverse is a UL 325 violation and a real hazard for kids and pets.
Hinge, Post, and Sag Correction
A sagging gate panel is rarely just worn hinges. In Clovis’s clay-heavy soil, post footings shift with wet winters and dry summers, and the panel drops again a month after a hinge swap. We inspect the footing, not just the hinge. On a cul-de-sac off Temperance Avenue, our tech traced a LiftMaster swing gate that had been re-leveled twice by another outfit back to a rotting hinge post footing. The post moved, so the panel never stayed true. We cut out the footing, re-poured it, corrected the sag, and reset the operator arm travel, then re-tested the safety photocell and keypad entry before leaving.
Gate Welding in Clovis
Gate Welding in Clovis is the right call when a steel or wrought-iron panel has cracked at a stress point, a hinge has torn loose, or rust has eaten through a lower rail. Do not wait on a cracked weld. A gate that fails while moving can injure someone or drop onto a vehicle. We weld on-site, grind the joint clean, and repaint the repair area to match. Typical gate welding repairs in Clovis run $200 to $500, depending on the size of the crack and whether the panel needs to come off its hinges.
Stress Crack and Rail Repair
Clovis’s temperature swings – from summer heat above 100 degrees to near-freezing winter mornings – make steel expand and contract. That repeated movement cracks welds over time, especially on long swing panels. We repair the crack and add a gusset where the panel design allows it, so the same joint does not fail again next season.
Rust and Corrosion Remediation
Rust along the bottom rail is the most common welding call we get from Clovis homes with tube-steel gates. Irrigation overspray and sprinkler run-off keep the lower rail damp. We cut out the rotted section, weld in new steel, and treat the seam so rust doesn’t start again at the weld boundary.
Trusted Brands We Service in Clovis
Our techs are factory-familiar with nine major gate opener brands, and for Clovis customers we commonly service Linear and DoorKing on slide gates, plus Ghost Controls and Viking on residential swing gates. We stock the most-replaced parts for these brands – control boards, limit switches, remotes, and safety edges – so a Clovis repair doesn’t wait on a parts shipment. If your opener is older or discontinued, we’ll tell you honestly whether a retrofit part or a new operator board is the smarter spend. The written quote always breaks out parts and labor before we start.
Common Gate Repair Problems We See in Clovis Homes
- Post footings shifting in clay soil: Clovis sits on clay-heavy ground that swells in winter and contracts in summer. A gate that rubs or drops after heavy rain usually has a footing problem, not a hinge problem.
- Openers wired onto a shared circuit: Many Clovis gates run off a 2-inch slab with no dedicated power run. The opener draws enough inrush current to trip the shared circuit box on the side of the house. We run a dedicated line before replacing a board that wasn’t actually bad.
- Safety sensors skipped after a panel swap: We see gates all over Clovis that had a new panel hung but never had the photocell or edge sensor re-tested. The gate looks fine, closes hard on anything in its path, and violates UL 325.
- Slide gate operators reversing on their own: In Clovis, this often traces back to a faulty safety loop detector in the driveway, not the operator itself. We test the loop before condemning a good motor.
Pricing for Gate Repair in Clovis, CA
Here’s what Clovis homeowners can expect on a typical service call. Gate opener repairs run $180 to $340 before parts. Hinge and post repairs, including sag correction, land between $250 and $600 depending on footing condition. Gate welding starts around $200 and runs up to $500 for larger crack and rail work. Safety sensor replacement or realignment generally adds $90 to $150. Every quote is written and agreed before work begins. The number on the invoice is the number you approved at the door. Call (903) 417-0793 for a free estimate on any of these repairs.
We Also Serve Cities Near Clovis
Our crews run Gate Repair in Clovis daily and cover the surrounding Central Valley communities as well. That includes Fresno, Sanger, Fowler, and Madera. Dispatch and scheduling coordinate from our Fresno, Central Valley office, with local crews serving Clovis directly.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Clovis
If your gate is resting on its latch side or dragging across the driveway, the first step is checking whether the hinge post itself has moved. In Clovis, clay soil shifts seasonally, and a post that tilts even a few degrees will make every hinge adjustment fail within weeks. We measure the post with a level and check the footing for rot or heave before quoting a sag correction. Most sag corrections in Clovis run $250 to $400 when the post is sound; replacing a bad footing starts around $500. Call (903) 417-0793 and we’ll diagnose it before you pay for a hinge kit that won’t hold.
Yes, and this is one of the most misdiagnosed failures we correct in Clovis. A slide gate that reverses mid-travel usually has a bad safety loop detector, a damaged loop wire in the driveway, or an obstruction signal from a failing photo eye – not a bad motor. We test the loop with a meter before recommending a repair or replacement. Loop detector repair typically lands between $150 and $300. Call (903) 417-0793 to schedule a diagnostic – the estimate is free.
Yes. Older eastside tracts in Clovis were platted with wide driveway aprons and shallow front setbacks, so a swing gate operator often sits tight against the property line. Before quoting an operator, we measure the available clearance. If the arm throw is too short, we’ll recommend a slide gate or a different operator configuration rather than sell you a unit that won’t perform. Full installation pricing starts around $1,800 for a single swing gate with operator, and we never promise same-day turnaround – a proper install includes groundworks, power, safety edges, and reversal testing. Call (903) 417-0793 for a written quote.
Our techs service nine major opener brands, including Linear, DoorKing, Viking, and Ghost Controls, which cover the majority of residential gates in Clovis. We stock common control boards, remotes, limit switches, and safety edges for these brands, so most repairs finish on the first visit. If your opener is discontinued, we’ll give you a straight answer on whether a retrofit part is worth the cost or a new operator makes more sense. Call (903) 417-0793 with your brand and model – a real person answers and can usually confirm parts availability on the spot.
A full gate installation in Clovis typically takes 2 to 4 days from start to finish, depending on footing conditions, power availability, and whether the gate is custom ordered. This is not same-day work, and any company promising same-day installation is cutting corners on concrete cure time, power runs, or safety testing. We schedule a free measure, deliver a written price, and set a start date before any deposit changes hands. Call (903) 417-0793 to book your measure – estimates are free and there’s no obligation.
Get Your Clovis Gate Working Again
Whether you’re off Temperance near the cul-de-sacs, up in Harlan Ranch, or anywhere else in Clovis, Calder Gate Repair is ready when your gate fails. A live person answers 24/7 at (903) 417-0793. You’ll get a written price before work starts, a written guarantee on every repair, and a free second visit if the fix fails within 365 days. Call now for a free estimate.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Clovis and the Central Valley since 2009.