Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Parlier, CA
Most gate problems in Parlier come down to two things: the summer heat working against aging openers, and sandy soil shifting concrete gate posts just enough to throw off the alignment. Calder Gate Repair handles both. We’re the dedicated gate repair specialist inside the Relay Home Co. family, and we serve Parlier homeowners with written pricing before any work starts, background-checked technicians, and a live person on the phone 24/7. If your gate is grinding, sagging, or refusing to open, call (903) 417-0793 and we’ll get you a straight answer and a real arrival time.
Why Parlier Homes Are Different
Parlier sits at the heart of the Central Valley, where summer temperatures routinely climb past 100 degrees and fine dust settles into every moving part. That heat does two things to gate hardware: it thins out the lubricant inside opener rails and gear assemblies, and it causes the steel in gate frames to expand and contract through wide daily swings. Over a few seasons, bolts loosen, limit switches drift, and opener motors run hotter than they were designed to. Sandy soil adds a second layer of trouble underneath: gate posts set in the valley’s loose, alluvial ground tend to shift subtly over time, and even a quarter inch of movement at the post makes the gate bind against its own latch or drag across the driveway.
Parlier’s housing mix also shapes the work we do. Older rural properties and ranch-style homes often have long driveway gates mounted on steel posts, while newer developments have shorter, lighter aluminum gates with automatic openers. The older the post concrete, the more likely we are to find crumbling footings or rust-jacked anchor bolts during a repair call. We diagnose those ground-level problems first, because no opener adjustment will hold if the post itself is moving.
Our Main Parlier Services
Parlier homeowners reach out to us most often for two situations: a gate that stopped opening entirely, and a gate opener that runs but won’t move the gate. Here’s how each one works in Parlier.
Gate Repair in Parlier
Gate repair here usually means one of three things: a sagging gate leaf, a latch that no longer lines up, or a wheel or hinge that’s worn out. Valley dust accelerates hinge and wheel wear, and when a gate sags even a few degrees, the weight of the leaf starts fighting the opener. We repair or replace hinges, weld cracks in steel frames, reset post alignment, and service the rollers and track that driveway gates ride on. Every repair gets a written price before we touch a tool. See the full breakdown on our Gate Repair in Parlier page.
Electric Gate Repair in Parlier
Electric gates add a motor, control board, and safety sensors to the mechanical side, and the Parlier heat is hard on all three. Capacitors fail, circuit boards cook, and photo-eye sensors get coated in dust until they false-trigger or stop working altogether. We troubleshoot the low-voltage side first, then the motor, then any wiring that runs underground from the house to the gate, where sandy soil and irrigation lines sometimes chew through insulation. Electric Gate Repair in Parlier covers the full diagnostic and repair process.
Gate Opener Repair in Parlier
When the gate itself moves but the opener won’t drive it, you’re looking at an opener problem. In Parlier that often shows up as a motor that hums but won’t turn, a remote that stopped pairing, or a keypad that works only in cool weather. We service the control board, limit switches (the small sensors that tell the gate when to stop), drive belts, and the radio receiver that talks to your remotes. Gate Opener Repair in Parlier walks through what each repair involves and what it typically costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Parlier
Most Parlier gates run on one of a handful of opener brands, and Calder technicians are factory-familiar with all of them. We regularly service Linear, Viking, Ghost Controls, and DoorKing openers across Parlier, and we stock common boards, remotes, and limit switches for faster turnarounds. For the full list, see our brands.
Pricing for Gate Company in Parlier, CA
| Service | Typical range in Parlier |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $200 – $400 before parts |
| Gate repair (hinges, latch, sag correction) | $150 – $300 before materials |
| Limit switch replacement | $80 – $180 before parts |
| Photo-eye / safety sensor replacement | $90 – $200 before parts |
| Control board replacement | $150 – $320 before parts |
| Remote / keypad programming or replacement | $60 – $140 before parts |
| Hinge weld repair (per hinge) | $75 – $160 before materials |
| Gate wheel or roller replacement | $80 – $190 before parts |
| Post alignment and re-anchoring | $200 – $400 |
What pushes a Parlier job toward the upper end of a range is usually the post footing. If the concrete around a gate post has crumbled and the post needs to be re-set, that’s a bigger job than swapping a control board. Whatever the final number, you’ll see it in writing before any work begins, and the invoice will match that number exactly.
Neighborhoods We Serve in Parlier
We dispatch to every corner of Parlier, from the older streets in the center of town to the rural acreages and vineyard-adjacent properties on the outskirts.
- Downtown Parlier and the streets around Manning Avenue
- Neighborhoods south of East Parlier Avenue
- The ranch-style homes near Academy Avenue
- Properties along South Newmark Avenue and the eastern edge of town
- Rural parcels off East Clemenceau Avenue
Response times across Parlier are quick because our scheduling and dispatch run through the Fresno Central Valley office, with crews serving the Parlier area locally.
Service Area – Cities Near Parlier
Calder Gate Repair serves Parlier and the surrounding Central Valley communities. If you’re nearby, we also cover Reedley, CA, Kingsburg, CA, and Fowler, CA. For properties further out, see Selma, TX. Give us a call and we’ll tell you right away if your address falls in our service area.
Serving Parlier, CA - Our Local Coverage Area
We’re based in the Parlier area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Parlier
Most Parlier repair calls are scheduled same-day or next-day. When you call, a live person confirms your address and gives you a trackable arrival window, not a four-hour range. Emergency calls are answered 24/7 at (903) 417-0793.
Repairs and opener replacements on existing gates generally don’t require a permit in Parlier. New gate installation or major structural work may trigger local building requirements. We can tell you what applies to your specific property before any work is scheduled.
The written price covers the repair work, labor, and any parts we install. It’s quoted and agreed to before we begin, and the final invoice matches that number. If the repair fails within 365 days under our Done Right Promise, the return visit is free. Call (903) 417-0793 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Parlier Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.