Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Selma, TX
Gate repair in Selma, TX means working on a mix of newer suburban builds along the I-35 corridor and older ranch-style properties north of the city, where gates have seen years of Hill Country wind and limestone dust. Calder Gate Repair is the gate company Selma homeowners call when a gate won’t open, won’t close, or starts grinding metal at 6 a.m. We’re part of the Relay Home Co. family, which means every job here gets a written price before we touch a bolt, a live arrival time you can track, and a 365-Day Done Right Promise behind the work. Call (903) 417-0793 and you’ll reach a real person, not a menu.
Why Selma Homes Are Different
Selma sits on the northeast edge of the San Antonio metro, but the gate work here feels different from in-town San Antonio. Lots are bigger, drives are longer, and a good number of gates are heavy steel or iron set on posts that shift with the clay soil. The soil in and around Selma expands when it rains and contracts in dry heat, which slowly pulls gate posts out of plumb. When a post leans even half an inch, the gate starts dragging, the opener motor works harder, and circuit boards fail sooner than they should. We see it regularly in neighborhoods like Retama Springs and Olympia, where gate frames that were perfectly square five years ago now bind at the latch.
Wind is the other constant. Selma sits on open, rolling terrain, and the prevailing winds push hard against broad gate panels. That constant pressure wears out hinges, bends track brackets on slide gates, and eventually kills the nylon gears inside openers. Homes with ranch-style metal gates and older openers tend to need limit switch replacement more often, and we always check the gate’s mechanical motion first, not just the operator. A new opener on a dragging gate fails within months. A square, balanced gate with a fresh opener runs for years.
Our Main Selma Services
Most Selma homeowners call us for one of two things: a gate that stopped moving entirely, or an opener that works but acts erratic. Here’s what each job looks like in Selma, with a page dedicated to each one.
Gate Repair in Selma
Gate Repair in Selma covers the metal, the posts, the hinges, and the mechanical movement of the gate itself. In Selma, we spend a lot of time correcting post lean from clay soil movement, replacing worn hinge plates, and re-hanging heavy gates that have sagged. A sagging Selma gate puts enormous load on the opener, so we always start by checking the gate’s motion by hand. If the gate doesn’t swing or roll freely with the opener disengaged, the mechanical repair comes first. We quote the whole job up front, in writing, and the price doesn’t change at the door.
Electric Gate Repair in Selma
Electric Gate Repair in Selma is about the powered side: limit switches, safety edges, photo eyes, control boards, and the low-voltage wiring between them. Selma’s dry, dusty air gets into control boxes and coats sensor lenses, so photo eye failures and false “obstruction” trips are common here. We clean, test, and replace sensors at the component level before recommending a new board, because most Selma gate issues are a $40 sensor or a broken wire, not a $600 board. Background-checked techs arrive in uniform with the parts for the job already on the truck.
Gate Opener Repair in Selma
Gate Opener Repair in Selma covers the motor, the gearbox, the arm, and the remote or keypad on the wall. After years of Selma heat, nylon drive gears inside openers get brittle and strip, and capacitor failures become more likely after a hundred-degree afternoon. We see a lot of Linear and LiftMaster swing-arm openers here that need new gear sets or fresh capacitors, which we can usually replace same-day from stock. If the opener is beyond a cost-effective fix, we give you a flat replacement price before we ever remove the old unit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
We’re factory-familiar with the brands Selma homeowners actually have on their gates: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our trucks carry common Selma parts for Linear, Viking, Ghost Controls, and DoorKing openers, so most board and sensor swaps happen on the first visit. Browse our brands page for the full list.
Pricing for Gate Company in Selma, TX
| Service | Typical range in Selma |
|---|---|
| Gate inspection + diagnosis | $49 – $149 |
| Hinge replacement (basic) | $120 – $300 |
| Gate post alignment / shim | $150 – $400 |
| Slide gate wheel / truck replacement | $180 – $450 |
| Limit switch replacement | $120 – $260 |
| Safety edge replacement | $150 – $350 |
| Photo eye sensor replacement | $140 – $320 |
| Control board repair | $180 – $400 |
| Control board replacement | $350 – $900 |
| Opener motor / gearbox rebuild | $250 – $650 |
| Full opener replacement (parts + labor) | $650 – $1,900 |
| Emergency after-hours dispatch | $120 – $250 (on top of repair) |
What pushes a Selma job toward the top of these ranges is usually a heavy steel gate that needs mechanical work before the opener can be touched, or a gate that’s badly out of square from years of post movement. Whatever the number, you get it in writing before any work starts, and the invoice matches that number.
Neighborhoods We Serve in Selma
We work across Selma, from the newer sections near Retama Springs and Olympia up to older properties near the north edge of town. Response time is typically within a day for most calls.
- Retama Springs
- Olympia
- Selma Park
- Kingsbridge
- Garden Ridge (Selma side)
Service Area – Cities Near Selma
Our Selma crew also covers nearby markets when a gate job takes us out of town. If you’re in one of these areas, you’ll get the same written price and 365-Day Done Right Promise. We serve San Antonio, FL, Houston, TX, Dallas, TX, and Fort Worth, TX. Dispatch for Selma jobs routes through our San Antonio metro office, so crews arrive with the right parts and a live, trackable ETA.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Selma
For most Selma service calls, we can schedule within one business day. Emergency calls are answered live 24/7 and dispatched on a priority basis. When you call (903) 417-0793, you get a specific arrival window and a live tracking link until the tech pulls up.
In most of Selma, repair work on existing gates doesn’t require a permit. New gate installations or major structural changes can trigger a permit through the city, but we’ll confirm what applies to your specific project before scheduling, and we’ll handle the permit paperwork if one is needed.
We cover the full Selma area, from the newest subdivisions to older properties near the city’s north end. No service fee just to come to your neighborhood. If you’re just outside Selma, call us anyway, because our San Antonio dispatch routes crews through the area daily.
For a written, no-questions price on gate repair in Selma, TX, call Calder Gate Repair at (903) 417-0793. A live person answers, every time, and your quote is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.