Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Selma
When your gate stops opening in Selma, you don’t need a vague four-hour arrival window. You need a real person who picks up the phone, a technician who shows up when they say they will, and a price you agreed to before any work begins. That’s how Calder Gate Repair operates. If you’re off Floral Avenue, near Selma High School, or out toward Highway 46, we can get a background-checked, uniformed tech to your property quickly, usually the same day for repairs. Call (903) 417-0793 and you’ll speak with a live person, not a recording.
Why Calder Gate Repair Is Selma’s Preferred Gate Repair Company
Selma homeowners call us because we treat a gate repair like a security issue, not a side job. A sagging iron gate or a dead opener on a driveway gate leaves your property exposed. We know the common failure points on Selma properties, from swing gates on corner lots near downtown to slide gates on larger parcels along Highway 46. We stock common parts for Linear, Viking, Ghost Controls, and DoorKing operators locally, so we’re not waiting a week for a control board to ship from somewhere else.
Every repair carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, Calder returns at no charge. Period. And before any work starts, you get a written price. The number on the invoice is the number you approved at the door. That’s the Relay Standard, and it’s how we’ve built our reputation in Selma. Nico Alvarez leads our team, and he’s the one you’ll talk to when you call.
Commercial Gate Repair in Selma
Commercial Gate Repair in Selma covers the automated slide gates, cantilever gates, and swing gates that secure businesses, storage facilities, and multi-tenant properties along Highway 46 and the industrial streets off Floral. These gates run harder than residential units, sometimes hundreds of cycles a day, which eats wear parts like rollers, guide trucks, and limit switches faster. A commercial slide gate that won’t close in Selma isn’t just an inconvenience, it’s an open invitation after hours.
Slide Gate Operator Diagnostics
The most common call we get from Selma businesses is a slide gate that stops mid-cycle or reverses when it shouldn’t. That’s usually the limit switch, the small sensor that tells the gate when to stop, or a loop detector that’s lost its tune after the ground shifted. We bench-test the opener’s motor capacitor and gearbox before quoting replacement, because swapping an entire operator when a $40 part failed is a waste of your money.
Safety Sensor Compliance Checks
Commercial gates in Texas must have functioning entrapment protection. We test photo-eyes, edge sensors, and reversal force to UL 325 standards on every commercial call. If your gate doesn’t reverse on contact, it’s a liability, not just a repair item. We document everything with before-and-after photos and a digital invoice you can pay from a link.
Iron Gate Repair in Selma
Iron Gate Repair in Selma is a year-round reality. The area’s clay-heavy soil bakes and shrinks during long dry summers, which causes hinge posts to settle. When a post shifts even half an inch, the gate leaf drags, the latch stops lining up, and the operator starts fighting the load. We see it on decorative driveway gates and pool gates all over Selma.
Post Settling and Gate Realignment
When an iron gate scrapes the driveway or won’t latch, tightening the hinge bolts is usually a temporary fix. The real problem is the post footing. We dig and reset the post in concrete, let it cure properly, then rehang the gate leaf so the reveal is even. From there we adjust the rack and pinion on automatic gates so the operator isn’t straining against a misaligned track.
Rust Repair and Weld Fixes
Selma’s temperature swings put iron gates through expansion and contraction cycles every day. Hairline cracks spread, bottom rails rust through from standing water, and decorative pickets pop welds. We grind, weld, and recoat affected areas. If the gate is worth saving, we save it. If it’s structurally compromised, we’ll tell you straight and quote a replacement instead.
Trusted Brands We Service in Selma
Our technicians are factory-familiar with nine major opener brands, and in Selma we most often work on Linear, Viking, Ghost Controls, and DoorKing systems. We don’t do the “all brands” shrug. If your Viking operator throws a fault code or your Ghost Controls keypad won’t learn remotes, we’ve seen it before and we know the fix. We keep common parts like control boards, limit switches, and photo-eyes in local stock, which means shorter wait times for Selma customers and fewer second trips.
Common Gate Repair Problems We See in Selma Homes
- Sagging gates from clay soil movement. The same expanding and contracting soil that cracks Selma sidewalks also works gate posts loose. A gate that scraped last month may sag worse by August if the post footing isn’t addressed.
- Solar opener batteries dying early. Central Valley heat shortens lead-acid and lithium battery life in solar gate openers. We test panel output and battery health before assuming the operator itself has failed.
- Safety photo-eye faults from shifting ground. When driveway ground flexes, photocell alignment wanders. The gate thinks something is in the way and refuses to close, or worse, reverses mid-cycle on a car.
- Limit switch drift on worn rack and pinion systems. A rack gear that’s out of alignment wears the operator’s limit switch setting. The gate overshoots or stops short. We reset the rack, re-time the limits, and test full travel.
Pricing for Gate Repair in Selma, TX
A service call in Selma typically runs $89, and that diagnostic fee is waived when you approve the repair. Most hinge and post repairs run $180 to $420 depending on how much concrete work the post needs. Gate realignment jobs fall between $150 and $350. Opener repairs, including control board replacements, limit switch swaps, and gear kit rebuilds, run $225 to $650 before parts depending on brand. For a full automatic gate installation with new posts, operator, and safety edges, expect $2,800 to $7,500. You’ll get a written price before anything starts. Call (903) 417-0793 for a free estimate. We also offer our Gate Repair team for jobs across the region.
We Also Serve Cities Near Selma
Calder Gate Repair covers Selma and the surrounding metro, including Houston, San Antonio, Dallas, and Fort Worth. Our scheduling and dispatch are coordinated from the brand’s San Antonio office, with crews serving Selma locally. If you need Gate Repair in Selma or you’re a neighbor across town, call the same number: (903) 417-0793.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Selma
Your gate post is moving in Selma’s clay soil, not the hinges. The soil here expands when wet and shrinks when dry, and that seasonal cycle loosens post footings over time. Tightening hinge bolts doesn’t address a post that’s slowly leaning. The fix is resetting the post in concrete, rehanging the gate leaf, and then realigning the operator. Call (903) 417-0793 and we’ll inspect the post before quoting.
Yes. Every automatic gate in Selma needs functioning entrapment protection: photo-eyes, safety edges, or both, tested to UL 325 standards. This isn’t optional equipment. It’s what stops the gate from closing on a child, a pet, or a car. If your sensors are missing or bypassed, the gate is a hazard, not just a repair waiting to happen.
Every 12 months minimum. Selma’s summer heat accelerates battery degradation in solar openers, and dust from the Central Valley coats solar panels and reduces charging output. An annual service includes battery load testing, panel cleaning, limit switch adjustment, and safety sensor alignment. Most of our Selma solar gate customers schedule this in late spring before peak heat hits.
Yes. We service commercial slide gates and cantilever gates along Highway 46 and throughout Selma’s business districts regularly. We coordinate with your staff to minimize downtime, and we can schedule after-hours work if the gate can’t be locked out during business hours. Call (903) 417-0793 and tell us the gate brand, and we’ll bring likely parts with us.
We repair Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. In Selma, Linear and DoorKing are the most common on residential slide gates, while Viking and Ghost Controls show up often on solar setups. We stock common parts for these locally and keep operator-specific diagnostic tools on every truck.
If your gate is stuck, sagging, or just not acting right, call Calder Gate Repair at (903) 417-0793. You’ll get a live person, a straight answer, and a written price before any work starts. That’s how we do it in Selma.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Selma and the surrounding Texas communities.