Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Houston?
Most gate repairs in Houston run $180 to $450, with the average homeowner paying around $295. Electric gate opener repairs typically land between $250 and $700 depending on the brand and the failed part, while a simple manual gate hinge or latch fix often comes in under $200. Emergency weekend calls and welded-gate repairs push higher, but you’ll always get a written price before any work starts, so the number you hear is the number you pay.
Calder Gate Repair handles our Gate Repair services, electric gate repair, and gate opener repair across Houston, from Midtown townhomes to Katy acreage. We work on the brands you actually own, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Gate Repair Cost Breakdown (2026)
Here’s what Houston homeowners are paying this year. These ranges are for labor plus common parts; if a motor or control board is involved, expect the top of the range or slightly above.
| Repair Type | Typical Houston Price Range |
|---|---|
| Gate opener / motor repair | $280 – $650 |
| Control board replacement (LiftMaster, DoorKing) | $350 – $800 |
| Limit switch repair | $180 – $320 |
| Safety sensor / photocell replacement | $160 – $300 |
| Remote and keypad programming | $95 – $180 |
| Gate hinge or latch repair | $150 – $350 |
| Roller and track repair | $200 – $425 |
| Welded gate frame or post repair | $325 – $750 |
| Chain or arm operator replacement | $400 – $900 |
| After-hours emergency call | Add $100 – $200 |
What pushes a job toward the high end? Motor replacement on a heavy slide gate, control board failures on older DoorKing units, and welded repairs where the post itself has shifted. What keeps it low? Quick fixes like a limit switch that just needs adjustment, a sensor knocked out of alignment, or a remote that lost its code after a power surge, which is common here during storm season.
What Affects Gate Repair Pricing in Houston
Pricing isn’t random. A handful of factors move the number up or down, and most of them are specific to this city-see How Much Does Gate Repair Cost in Jacksonville, FL? (2026 Price Guide) for regional comparison.
- Opener brand and age. A Mighty Mule DIY-grade opener is simpler and cheaper to work on than a commercial-grade FAAC or DoorKing system running a heavy slide gate. Parts for the big brands are easier to source, which keeps your cost down.
- Gate type and weight. A single swing gate on a suburban driveway in Meyerland is a lighter job than a wide double swing or a slide gate on a River Oaks property. Heavier gates wear parts faster and take longer to realign.
- Houston’s humidity and soil. Our clay soil expands and contracts through the year, which shifts gate posts and throws tracks out of level. That’s a real driver of roller and hinge repairs here in a way it isn’t in drier markets.
- Water and drainage. After heavy rain, standing water around a driveway gate rusts chains and corrodes control boxes. We see this constantly in older neighborhoods with poor drainage.
- Parts availability. A common LiftMaster board or a standard Linear arm operator is usually on the truck or a quick pickup. An obscure imported opener can add days and dollars to source a replacement.
- Access and gate location. A gate tucked behind landscaping or on a narrow alley entrance takes longer to work on than one with clear access, and that time shows up in the price.
How to Save on Gate Repair
You don’t have to overpay to get it done right. A few moves keep the bill down without cutting corners, similar to what’s covered in How Much Does Gate Repair Cost in Las Vegas, NV? (2026 Price Guide).
- Get a written price before work starts. This is standard with us, but ask any company. If the number changes at the door, walk away. Our written price is guaranteed before a single bolt is turned.
- Fix small problems early. A $180 limit switch or sensor repair today can prevent a $600 motor replacement down the road. Worn rollers chew up tracks; a misaligned gate strains the opener. Catch it early.
- Bundle the work. If your opener needs service and your hinges are loose, handle both in one visit. You’re already paying for the trip.
- Know your brand. Tell us you have a FAAC or a Viking up front. Factory-familiar techs don’t fumble with unfamiliar systems, and that keeps your labor time (and cost) down.
- Skip the after-hours call if you can wait. Emergency visits add $100 to $200. If your gate is stuck open and it’s not a safety issue, a next-day appointment saves money.
- Trust the guarantee. Our 365-Day Done Right Promise means if the repair fails within a year, we come back at no charge. A cheap fix that fails in two months isn’t actually cheap.
Estimates are always free. Call (903) 417-0793 and a live person will book you a real arrival time you can track.
Why Houston Homeowners Choose Calder Gate Repair
We’re the dedicated gate repair specialist inside the Relay Home Co. family, independently owned and operating in Houston since we joined the network-compare with How Much Does Gate Repair Cost in Long Beach, CA? (2026 Price Guide). That means real accountability: a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window.
Every technician is background-checked and arrives in uniform. You get a live, trackable arrival window instead of a vague four-hour block, before-and-after photos, and a digital invoice you pay from a link. And when you call, a live person answers, 24 hours a day, seven days a week. No voicemail, no chatbot.
Whether it’s a LiftMaster swing gate in The Heights or a DoorKing slide gate at a Montrose commercial entrance, we’ve worked on it. When you need gate repair, electric gate repair, or gate opener repair in Houston, you’re getting a specialist, not a general handyman guessing at wiring.
FAQs – Gate Repair Cost
How much does gate opener repair cost in Houston?
Gate opener repair in Houston typically runs $250 to $700, with control board replacements on LiftMaster or DoorKing systems often reaching $800. The exact number depends on the brand and the failed part. Call (903) 417-0793 for a free written estimate before anything starts.
Is it cheaper to repair or replace my gate opener?
Repair usually wins if your opener is under 10 years old and the fix is a sensor, limit switch, or board, which runs $180 to $550. Replacement makes more sense when the motor is failing on a unit over 12 years old and repair would cost more than half the price of a new opener. We’ll tell you honestly which one is the better call.
Can you come out today for gate repair in Houston?
Yes, same-day appointments are common, and we answer calls live 24/7 for emergencies. After-hours visits add $100 to $200 to the standard repair price. Call (903) 417-0793 and we’ll give you a real arrival time you can track, not a vague window.
Do you charge for estimates?
No, estimates are free, and you get a written price before any work begins. That price doesn’t change at the door. Every repair also carries our 365-Day Done Right Promise with a free return visit if it fails within a year.
What’s the most expensive gate repair?
Full motor or chain operator replacement on a heavy commercial slide gate runs $400 to $900, and that’s typically the top of the range. Welded frame repairs on shifted posts in Houston’s clay soil can also reach $750. Most residential repairs stay well under that.
Book Your Houston Gate Repair
Get a written price, a trackable arrival time, and a job backed by the 365-Day Done Right Promise. Call (903) 417-0793 for a free estimate, and start at our home page to see everything we cover.
Pricing reflects the Houston market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Houston since 2009.
What Our Customers Say
"Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J.