Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in San Antonio?
Most gate repair services in San Antonio run $150 to $450, with the average job landing around $260. Simple fixes like a misaligned roller or a worn hinge sit at the low end, while opener motor replacements or control board failures push past $600. We put the exact price in writing before we touch anything, so the number you agree to at the door is the number on the invoice.
Below you’ll find a full 2026 breakdown for the San Antonio market and how much gate repair costs in San Diego, CA, what drives those numbers up or down, and how to avoid paying more than the job requires.
Gate Repair Cost Breakdown (2026)
These ranges reflect what San Antonio homeowners actually pay for parts and labor, before any surprise add-ons. We handle every brand in the list, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
| Repair Type | Typical Price Range | Notes |
|---|---|---|
| Service call + diagnosis | $79 – $120 | Waived when you approve the repair |
| Roller or hinge replacement | $150 – $275 | Common on older sliding gates |
| Gate sagging / alignment fix | $180 – $340 | Often a post or weld issue |
| Limit switch replacement | $160 – $300 | The sensor that tells the gate when to stop |
| Control board replacement | $320 – $650 | Varies by brand; DoorKing and FAAC run higher |
| Opener motor replacement | $450 – $900 | Includes motor and labor |
| Safety sensor / photo-eye repair | $140 – $280 | Required on automatic gates |
| Arm or actuator repair | $280 – $550 | Swing gates; hydraulic units cost more |
The biggest single factor is whether the problem lives in the gate itself or the opener, similar to what we see with gate repair costs in San Francisco, CA. A bent track costs a fraction of a replacement control board, which is why diagnosis comes first. Parts availability matters too. LiftMaster and Linear parts are widely stocked, so those repairs tend to sit at the lower end. FAAC and DoorKing components sometimes need to be ordered, which adds a few days and occasionally a bit more in labor.
What Affects Gate Repair Pricing in San Antonio
- Gate type and weight. A light residential swing gate is quicker to work on than a heavy cantilever sliding gate. Heavier gates need more labor to lift, realign, and test safely.
- Opener brand and model age. We’re factory-familiar with nine major brands, but a discontinued opener from 2010 may need a part we have to source. Newer LiftMaster and Ghost Controls units are usually a same-visit fix.
- Whether it’s a gate problem or an opener problem. Homeowners often assume the motor died when the real issue is a worn hinge or a bent track. We diagnose free before recommending any part.
- Access and terrain. San Antonio properties with steep driveways, rock landscaping, or tight side-yard access take longer to reach and work around, which shows up in labor.
- Weather damage. Our freeze events in February and the summer UV that bakes control boxes both cause failures. After a hard freeze we see a spike in cracked gears and seized actuators.
- Permit and code considerations. Automatic gates on residential properties need functioning safety sensors. If your gate lacks working photo-eyes, we include them in the quote because a gate that won’t stop for a child or pet isn’t a repair we’ll leave behind.
Gate Safety: Why We Don’t Recommend DIY on Some Repairs
Gate openers are low-voltage on the control side but run on 120V household current at the outlet, and swing gate arms and counterbalance springs store real force. A gate arm under tension can swing hard enough to break a wrist or worse. If your gate uses a torsion spring, a counterbalance, or an overhead track under load, that’s a job for a trained technician, not a weekend project. We’re not gatekeeping the information, we just don’t want anyone getting hurt to save a service call.
What you can safely check yourself: the outlet the opener plugs into, whether the manual release works, and whether anything is physically blocking the gate’s path. Everything past that is where we come in.
How to Save on Gate Repair
The cheapest gate repair in San Jose, CA or anywhere is the one you catch early. A $160 limit switch today beats a $650 control board next month. Beyond that:
- Get the diagnosis before you approve parts. A written price before work starts means you can compare and decide, no pressure. Every Calder job includes this.
- Bundle repairs. If your gate needs a new hinge and a sensor, we quote both together. One trip, one labor charge.
- Keep the opener clean. Clear debris from around the control box and keep the track free of grit. San Antonio’s dust and pollen build up faster than most homeowners expect.
- Test the manual release twice a year. A seized release turns a small repair into a bigger one.
- Ask about the 365-Day Done Right Promise. If our repair fails within 365 days, we come back at no charge. That’s a free second visit, not a warranty you have to fight for.
Every estimate from us is free, and we answer the phone live 24/7. Call (903) 417-0793 and we’ll give you a number before anyone heads out.
How the Repair Process Works
- You call and get a live person. No voicemail, no chatbot. A real human books you in and gives you a trackable arrival time.
- We diagnose on site. Background-checked, uniformed technician inspects the gate and opener and explains what’s wrong in plain terms.
- You get a written price. The number is fixed before any work starts. No surprises at the door.
- We complete the repair. Parts are installed, the gate is tested through full open and close cycles, and safety sensors are verified.
- You get before-and-after photos and a digital invoice. Pay from a link, and your guarantee is documented in writing.
FAQs – Gate Repair Cost
How much does gate repair cost in San Antonio?
Most gate repairs in San Antonio cost $150 to $450, with the average around $260. Opener motor or control board replacements run higher, from $450 to $900 depending on the brand. Call (903) 417-0793 for a free estimate on your specific gate.
Is it cheaper to repair or replace my gate opener?
Repair is almost always cheaper if your opener is under 10 years old. A $320 control board beats a $900 motor replacement, unless the motor itself is burned out or the unit is discontinued. We’ll tell you honestly which makes sense before you spend anything. Call (903) 417-0793 to get a straight answer.
How much does an emergency gate repair cost in San Antonio?
Emergency and after-hours gate repairs typically run $200 to $500, depending on the part. We answer calls 24/7 with a live person, so you’re never stuck waiting. Most urgent repairs are diagnosed and quoted the same day.
Do you charge a service call fee?
Our standard diagnostic fee is $79 to $120, and we waive it entirely when you approve the repair. That means you only pay the fee if you decide not to move forward. Call (903) 417-0793 to schedule.
Can you fix my gate the same day I call?
Yes, for most common repairs. If the part is in stock (typical for LiftMaster, Linear, and Mighty Mule), we can often complete the repair on the first visit. Special-order parts like some FAAC or DoorKing components add a few days. Call (903) 417-0793 and we’ll tell you exactly what to expect for your gate.
Why San Antonio Homeowners Call Calder
Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, founded in 2009, with each location independently owned and operated. We’re factory-familiar with nine major opener brands, so there’s a good chance we’ve worked on your exact model before. Every job carries three written guarantees: a price before work starts, a guarantee on the repair itself, and a free second visit if the repair fails within the 365-Day Done Right Promise. You’ll get a trackable arrival time, before-and-after photos, and a digital invoice you pay from a link. That’s the Relay Standard, and it’s how we’ve kept neighbors in San Antonio calling us back. Reach out through our home page to see how we work.
Ready for a real number? Call (903) 417-0793 for a free estimate. A live person answers 24 hours a day, and we’ll put your price in writing before we start.
Pricing reflects the San Antonio market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving San Antonio, TX since 2009.
What Our Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.