Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lantana
Most gate repairs in Lantana run between $190 and $480 depending on what’s actually wrong, and we can usually have a technician at your door within a few hours of your call. If your gate is sagging, grinding, or refusing to open, call us at (903) 417-0793 and a live person will answer, day or night. We know Lantana’s neighborhoods, we know how the clay soil here treats gate posts, and we’ll give you a written price before any work starts.
Why Calder Gate Repair Is Lantana’s Preferred Gate Repair Company
Lantana homeowners call us because we show up when we say we will, with a live, trackable arrival time you can watch from your phone. No four-hour windows. No phone tag. You’ll know who’s coming, when they’ll arrive, and what the job costs before a single bolt is turned. Calder Gate Repair is part of the Relay Home Co. family, established 2009, and this location is independently owned and operated under The Relay Visibility Guarantee.
Our technicians are background-checked, uniformed, and factory-familiar with nine opener brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers virtually every gate system a Lantana homeowner is likely to own. We stock common parts locally for Lantana customers so repairs don’t stall waiting on a shipment from out of state.
We’ve worked along Laurel Oak Lane, off Copper Canyon Road, and through the neighborhoods around Lantana Trail. Our Gate Repair team sees the same issues repeat across this community: hinge posts heaving on clay soil, rack teeth stripped on slide gates, and weather-exposed keypad wiring nuisance-tripping after storms. Nico Alvarez leads our crew, and he insists every job ends the same way: the gate works, the safety edges are tested, and you understand exactly what was fixed.
Wood Gate Repair in Lantana
Wood Gate Repair in Lantana usually means a gate that’s sagged, scraped, or split after years of North Texas sun and wet-dry soil cycles. Even when the operator works fine, a wooden gate leaf that’s absorbed moisture or pulled away from its hinges will bind and strain the motor. A typical wood gate repair here runs $165 – $390, depending on whether we’re re-hanging the leaf, replacing hinges, or splicing in new framing where rot has taken hold.
Re-Hanging and Hardware Replacement
Sagging wood gates are the most common call we get in Lantana. The fix often starts with new, heavier-duty hinges and hinge-side post reinforcement, then re-leveling the leaf so it closes squarely against the latch post. On Lantana’s clay-heavy ground, we’ll also check whether the hinge post itself has moved before we adjust anything else.
Rot Repair and Reinforcement
North Texas humidity, irrigation overspray, and ground contact all work against wood gates. Where the bottom rail or a corner post has rotted, we cut out the bad section and splice in new treated lumber, then reinforce the joint with metal brackets. It saves the gate without paying for a full replacement, which in Lantana typically costs $700 – $1,900 for a made-to-fit wooden gate.
Driveway Gate Repair in Lantana
Driveway Gate Repair in Lantana covers both swing and slide gates, and the price usually lands between $220 and $520 for a mechanical or electrical fix on an existing automatic gate. Most failures in this area aren’t the motor at all: post movement, seized hinges, worn limit switches, and debris in the track are the usual culprits. When the operator itself has failed, we can often have the part in from local stock and the gate running again the same week.
Swing Gate Systems
Swing gates are common across Lantana’s master-planned neighborhoods, and they’re the most sensitive to soil movement. When the hinge post shifts out of plumb, the gate leaf drags on the driveway and the opener strains until it burns out. We correct the post, re-level the leaf, and test the full travel range before calling the job done.
Slide Gate and Track Work
Slide gates need a clear track and aligned rollers to move smoothly. Rack and pinion teeth strip when debris jams the gate or when a post shift throws the alignment off. A stripped rack replacement in Lantana typically costs $145 – $285 before labor, and it’s a repair we handle same week with parts on hand.
Trusted Brands We Service in Lantana
We’re factory-familiar with the opener brands Lantana homeowners actually have. Linear openers are common on the newer builds in Lantana, Viking systems appear on heavier estate gates, Ghost Controls openers show up on DIY-installed driveway gates, and DoorKing units run many of the community’s subdivision entries. We stock printed control boards, limit switches, and remotes for these brands locally, so we’re not waiting on a distributor in Houston to get your gate moving. If you know your opener brand, mention it when you call and we’ll bring the right parts on the first trip.
Common Gate Repair Problems We See in Lantana Homes
- Heaving hinge posts on clay soil. Lantana sits on expansive clay that swells in wet months and shrinks in dry ones. That annual cycle shifts post footings and drags swing gate leaves out of alignment, sometimes within two or three years of installation.
- Stripped rack and pinion teeth on slide gates. A hard stop or a debris jam in the track can shear teeth off the rack. The operator still runs, but the gate barely moves, and continuing to run it does more damage.
- Keypad and loop detector wiring nuisance-tripping after storms. North Texas thunderstorms and irrigation leaks corrode outdoor connections. The gate stays open, refuses to close, or cycles randomly.
- Photocell misalignment from gate movement. When a gate shifts, the safety photocells fall out of line and the operator refuses to close, or closes and reverses unexpectedly. We realign, retest, and confirm the reversal force is set correctly.
Pricing for Gate Repair in Lantana, TX
Here are honest numbers for Lantana’s market. A hinge and post realignment on a swing gate runs $185 – $340. Replacing a limit switch, the small sensor that tells the gate when to stop, runs $120 – $240. A new opener control board runs $280 – $560 installed, depending on the brand. Full automatic gate installation starts around $2,800 for a single swing gate, and doubles for a dual-leaf system with new posts and groundworks. Every quote is written down before we start, and the price you sign is the price you pay.
Call (903) 417-0793 for a free estimate. You’ll get a number in writing, not a vague promise.
We Also Serve Cities Near Lantana
Beyond Lantana, our crews handle gate repair calls in Dallas, Fort Worth, Houston, and San Antonio. If you own property in one of those cities, the same written pricing and 365-Day Done Right Promise apply. See our full coverage at Gate Repair in Lantana for details on our local service area.
Serving Lantana, TX - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lantana
The most common cause in Lantana is expansive clay soil moving the hinge post or the gate post footing out of plumb. Adjusting the gate leaf alone doesn’t fix a post that’s shifted. We re-set the post footing and re-level the gate so it stays corrected. Call (903) 417-0793 and we’ll assess whether your post has moved before we touch the hinges.
Yes. Automatic gate systems in Lantana must comply with UL 325 safety standards, which means working photocells, proper reversing force settings, and functioning edge sensors if required. We test all of these on every repair and installation, and we’ll walk you through how to test them yourself. If your photocells aren’t working, call us for a same-week fix.
No, and any company that says otherwise is cutting corners. A proper installation in Lantana means measuring the site, ordering the gate and operator, setting new posts or footings, running power, installing safety edges and photocells, and then testing everything. That takes at least a few days across multiple visits, and it starts with a free on-site measure. Call (903) 417-0793 to schedule yours.
A swing gate opens inward or outward from a hinge, while a slide gate moves horizontally along a track. On Lantana’s clay soil, swing gates need stronger post footings because the ground shifts, and slide gates need a clean, level track with proper drainage. We’ll help you choose based on your driveway slope, setback, and the gate’s weight. Estimates are free.
Check whether the operator’s disconnect lever has been pulled, which releases the gate for manual operation. If the lever is engaged and the gate still won’t move, the problem is likely a sheared pin, stripped rack, or a broken chain or belt inside the operator. Don’t force it. Call (903) 417-0793 and describe what you hear when the motor runs; we’ll bring the right parts on the first trip.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Lantana and the greater Dallas-Fort Worth area.