Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Leon Valley
Gate repair in Leon Valley usually costs between $180 and $640 depending on whether we’re fixing an opener, re-setting a post, or correcting a sag on an iron gate. Most repairs are done in one visit, and every job starts with a written price before we touch a single bolt. If your gate is stuck, dragging, or refusing to open, call Calder Gate Repair at (903) 417-0793. We know Leon Valley’s soil, its older subdivisions, and the specific ways gates fail here.
Leon Valley sits directly on the Balcones Fault Zone. That matters more than most homeowners realize. The shallow clay and limestone under this city expand when it rains and contract during dry spells, which slowly works gate posts loose. A gate that swung fine in May can be dragging by September. That’s the biggest reason our Gate Repair team re-sets more posts in this area than in any neighboring city we serve.
Why Calder Gate Repair Is Leon Valley’s Preferred Gate Repair Company
Calder operates inside the Relay Home Co. family, founded in 2009, and we built our reputation in Leon Valley on showing up when we say we will. You get a live, trackable arrival time from a real dispatcher, not a four-hour window and a shrug. Our technicians are background-checked, uniformed, and factory-familiar with the opener brands most common in Leon Valley homes: FAAC, BFT, Linear, and Viking among them.
Every repair comes with the 365-Day Done Right Promise in writing. If the fix fails within a year, we return at no charge and make it right. That’s not a sales line. It’s printed on your invoice. The price you approve at the door is the price you pay from the digital invoice link we send afterward. No add-ons, no “while we’re here” surprises.
We also answer our phones live 24/7. You call (903) 417-0793, a person picks up. Whether it’s 2 PM on a Tuesday or 2 AM on a Sunday, someone can book the call, update you on the crew’s location, or troubleshoot over the phone.
Nico Alvarez leads our Leon Valley team, and he’s the one who signs off on every repair standard we use here. If a gate post needs to go deeper because of the clay, he’s already measured it and budgeted the concrete.
Iron Gate Repair in Leon Valley
Iron gate repair in Leon Valley almost always comes down to two things: hinge post movement and weld fatigue. The clay soil here slowly tilts hinge posts, which shifts the entire weight of the panel onto the bottom hinge. Given a year or two, the bottom weld cracks, the gate drags, and the opener burns itself out trying to move a panel that no longer swings true.
Most iron gate repairs in Leon Valley run $240 – $520, depending on whether we’re re-welding a cracked joint, re-setting a post, or both. That price includes the labor, materials, and a full function test before we leave. We quote it before we start, and the number doesn’t move.
Hinge Repairs and Post Re-Sets
When an iron gate sags and the hinges are tight but the panel still drags, the post itself has moved underground. We dig the old footing out, go deeper than the original (Leon Valley clay needs it), pour fresh concrete, and re-hang the panel level. This is routine work for us here.
Weld and Rust Repair
Leon Valley’s humidity works on iron gates year-round, and the failure is usually at the bottom rail or hinge barrel. We grind the rust, re-weld the joint, and seal it. If the rust has gone structural, we tell you straight and replace the section instead of patching it.
Sliding Gate Repair in Leon Valley
Sliding gate repair in Leon Valley often starts with a wheel or track problem rather than the opener. Clay soil holds water after rain, and that moisture finds its way into track beds and roller assemblies. Wheels corrode, tracks shift, and the gate starts grinding instead of gliding. The opener then works harder until the motor or the limit switch gives out.
Sliding gate repairs here typically run $200 – $480 before parts. If the track needs re-leveling and the opener needs replacement, you’re closer to $600 – $900 all in. We show you the written price before anything starts, and we never bill you for a repair we didn’t agree to first.
Track and Roller Rebuilds
The most common call we get from Leon Valley’s established neighborhoods is a sliding gate that’s heavy on one end and jerks when it moves. That’s almost always a roller set that’s worn unevenly or a track bed that’s sunk in soft soil. We re-level the track, replace the rollers, and run the gate through full cycles until it rolls quietly.
Opener Replacement on Sliding Gates
If your sliding gate’s motor runs but the panel doesn’t move, or it stops halfway and sits there, the limit switch or the gearbox has likely failed. We stock parts for FAAC, BFT, Linear, and Viking openers specifically because those are the brands we see most in Leon Valley’s older subdivisions. Same-day repair is common on these calls.
Trusted Brands We Service in Leon Valley
We’re factory-familiar with nine opener brands, but the ones we open up most often in Leon Valley are FAAC, BFT, Linear, and Viking. These are the workhorses installed on the 15-to-20-year-old gates across this city, and they fail in predictable ways: worn gears, dead capacitors, fried control boards, and limit switches that lose their setting. Because we carry common parts for these brands locally, a Leon Valley repair often gets done the same day we diagnose it. You don’t wait on a warehouse in Dallas. We stock what Leon Valley gates actually use.
Common Gate Repair Problems We See in Leon Valley Homes
- Sagging swing gates after rain. The expansive clay under Leon Valley swells with moisture and shrinks in dry heat. Hinge posts tilt, the panel binds, and the gate won’t close. We re-dig the footing, go deeper, and re-anchor the post in concrete.
- Dead openers on 15-20 year old gates. The original chain-drive and rack-and-pinion units in Leon Valley’s established subdivisions are hitting end of life. We replace them with modern units and re-set the travel limits so the gate stops exactly where it should.
- Missing or failed safety edges and photocells. UL 325 requires automatic gates to reverse when they meet resistance or break the photo beam. Many older Leon Valley installations were done before that code was enforced. We install and test safety edges and photocells on every automatic gate we touch.
- Gate posts pulling loose in clay soil. Standard 24-inch footings aren’t enough in Leon Valley. The Balcones Fault Zone clay moves too much. We go deeper, use proper concrete, and brace the post so it stays put through wet winters and dry summers.
Pricing for Gate Repair in Leon Valley, TX
Here’s what Leon Valley homeowners can expect to pay, based on jobs we’ve done across the city. These are real ranges, not guesses.
- Service call and diagnostic: $75 – $95, waived if you proceed with the repair.
- Hinge weld or sag correction on an iron gate: $240 – $520.
- Sliding gate track re-level and roller replacement: $200 – $480.
- Gate opener replacement (parts included): $380 – $780 depending on brand and horsepower.
- Post re-set with deeper footing in clay soil: $350 – $600 per post.
- Full gate re-hang and alignment: $300 – $550.
What affects the price: gate weight and material, post condition, opener brand, and whether we’re pulling new wire for safety edges. You get a written quote before any work starts. The invoice matches the quote, and you pay it from a digital link we send you. To get an exact number for your gate, call (903) 417-0793. Estimates are free.
We Also Serve Cities Near Leon Valley
Calder Gate Repair handles Gate Repair in Leon Valley and the surrounding metro, including Houston, San Antonio, Dallas, and Fort Worth. If you’re just outside Leon Valley and unsure whether we cover your street, call us. Dispatch is coordinated from our San Antonio office, and crews serve Leon Valley daily.
Serving Leon Valley, TX - Our Local Coverage Area
We’re based in the Leon Valley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Leon Valley
The hinge post is tilting underground, not the hinges coming loose on the panel. Leon Valley’s Balcones Fault Zone clay swells when it rains and shrinks in dry weather, and that movement slowly pushes the post out of plumb. A wrench on the hinge bolts won’t fix a post that’s leaning in soft soil. The fix is digging the footing out, going deeper than the original, and re-setting the post in fresh concrete. We do these re-sets regularly across Leon Valley, and the correction lasts. Call (903) 417-0793 to have us check your post.
If your gate doesn’t have working safety photocells or a functioning safety edge that reverses the panel when it hits something, it doesn’t meet UL 325 code and it’s a safety risk. Many older Leon Valley gates were installed before this standard was enforced, so missing or dead safety devices are common. We test the reversal on every automatic gate we service and install photocells and edges where they’re absent. A gate that won’t reverse when it meets resistance can seriously injure a person or pet. Call (903) 417-0793 and we’ll check yours.
Yes, most Leon Valley gate repairs are done the same day. We stock common parts for FAAC, BFT, Linear, and Viking openers locally because those are the brands this city’s older gates use. Unless your job needs a custom panel or a rare part, the technician diagnoses, quotes, and fixes in one appointment. We’ll tell you before we dispatch if something looks like a two-trip job. Call (903) 417-0793 and describe the problem; we’ll let you know what to expect.
We service FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. In Leon Valley specifically, we see mostly FAAC and Linear units on older sliding gates and BFT or Viking on swing gates and barrier arms. We keep common boards, capacitors, and limit switches for these brands available, which speeds up most local repairs. Call (903) 417-0793 with your opener’s model number and we’ll confirm parts availability before the visit.
Yes. The expansive clay and limestone under Leon Valley on the Balcones Fault Zone require deeper, concrete-anchored footings than the standard 24 inches used in other parts of Texas. Shallow posts tilt, the gate sags, and the opener eventually burns out fighting the misalignment. We re-set posts here with deeper footings and proper concrete as a matter of standard practice. It costs more than a surface-level post repair, but it’s the only fix that lasts in this soil. Call (903) 417-0793 for a firsthand assessment of your gate posts.
Call Calder Gate Repair for Gate Repair in Leon Valley
If your gate won’t open, won’t close, or drags on the driveway in Leon Valley, call us at (903) 417-0793. You’ll get a live person, a written price before any work starts, and the 365-Day Done Right Promise on every repair. We serve Leon Valley daily, and our technicians know the soil, the housing stock, and the opener brands on these gates. Free estimates. Fast, trackable arrival times. No surprises.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Leon Valley since 2009.