Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Savannah
A gate that won’t open in Savannah is more than an inconvenience, it’s a security gap and a daily headache. Most gate opener repairs in Savannah run $180 to $340 before parts, and our technicians typically reach Savannah homes the same day you call. Calder’s Gate Repair team knows the sandy soil, the salt air, and the storm-driven damage that gates in this part of the lowcountry deal with every season. Call (903) 417-0793 and a live person answers, 24/7.
Why Calder Gate Repair Is Savannah’s Preferred Gate Repair Company
Savannah homeowners keep our number saved because we show up when we say we will, with a live arrival time you can track from your phone, not a four-hour window. Our technicians are background-checked, uniformed, and trained on nine opener brands including Viking, Ghost Controls, and DoorKing, so the person at your gate has seen your exact equipment before. Every job gets a written price before any work starts, and every repair carries the 365-Day Done Right Promise: if the repair fails within a year, we return and make it right at no charge.
We coordinate Savannah dispatch from our Atlanta office, but the crews serving Savannah live and work in the coastal Georgia market. That matters because gate failures here follow patterns that don’t show up in drier inland metros. A post that heaves after a summer downpour, a hinge corroded by salt spray off the marsh, a photocell blinded by storm debris: these are Savannah problems, and our techs read them like a local, because they are one. Nico Alvarez leads the team, and he insists that every Savannah job end with the owner understanding exactly what was fixed and why.
Sliding Gate Repair in Savannah
Sliding Gate Repair in Savannah almost always starts with a question: is the gate moving off its track because of the operator, or because the ground under the post moved? Savannah’s sandy soil holds water after heavy rain, and a footing set shallow will heave and shift, dragging the gate off line within a season. Most slide gate realignment and track repair jobs in Savannah run $225 to $475, depending on whether the post footing needs to be reset to a deeper bearing point. The rack and pinion or chain drive itself is often fine; the problem is below grade.
Track Realignment and Post Footing Work
When a slide gate grinds or drifts, we check the track level first, then the post. In Savannah we regularly reset drive-side post footings that have sunk into saturated ground after a season of storms. A quick panel adjustment that ignores the footing will fail again within months; we fix the ground problem so the track stays true.
Operator and Limit Switch Checks
If the post is solid, the fault usually sits in the operator or the limit switch, the small sensor that tells the gate where to stop. Salt-heavy air shortens the life of these switches and corrodes the housing faster than inland gates see. We stock replacement parts locally for Viking, Ghost Controls, and DoorKing slide operators, which keeps Savannah turnarounds short.
Wrought Iron Gate Repair in Savannah
Wrought Iron Gate Repair in Savannah means fighting rust and salt corrosion as much as mechanical wear. The coastal air off the Atlantic and the marsh puts a constant layer of chlorides on iron, so hinges stiffen, welds crack, and the gate sags faster than it would in Atlanta or Macon. Typical wrought iron hinge replacement and realignment in Savannah runs $240 to $520, while full rust repair with grinding, priming, and repainting runs $350 to $900 depending on panel size and corrosion depth.
Hinge and Post Repair
A sagging iron gate is usually a hinge problem, not a panel problem. In Savannah the hinge pins seize from salt deposits and the post side of the hinge wallows out, letting the whole leaf drop. We weld in new hinge plates, bush the pins, and reset the post plumb before rehanging the gate, so the fix holds through the humid summers.
Weld and Rust Remediation
Rust on a wrought iron gate is structural here, not cosmetic. We grind affected sections back to clean metal, weld any cracked scrollwork or pickets, and apply a salt-resistant primer and topcoat rated for coastal exposure. When welding near the gate operator and safety sensors, we disconnect power and shield the electronics, because a stray arc can fry a control board fast.
Trusted Brands We Service in Savannah
Savannah neighborhoods run a broad mix of gate equipment, from builder-grade openers in new subdivisions off Highway 204 to a Viking on a marsh-front estate in Isle of Hope. Calder technicians are factory-familiar with nine major brands, and for Savannah customers we carry local stock of common Viking, Ghost Controls, and DoorKing parts: limit switches, control boards, remotes, and safety photocells. That means less time waiting on a freight shipment and more time with a working gate. If your opener is an Elite, a BFT, or a Mighty Mule, we service those too, same standard.
Common Gate Repair Problems We See in Savannah Homes
- Coastal soil heave under the post. Savannah’s high water table and sandy subsoil mean a footing set at shallow depth shifts after a run of summer rain, throwing the operator and track out of alignment. Repairs often start with a post reset, not a panel swap.
- Salt corrosion on hinges and electronics. The Atlantic and marsh air deposits chlorides on iron hinges, photocell lenses, and operator housings. Hinges seize, contacts corrode, and control boards fail faster than inland units do.
- Storm-bent swing gates and knocked-off tracks. Coastal gusts and falling branches from Savannah’s live oaks bend swing panels or pop slide gates off their rails. A visible panel fix that skips the hinge post just resets the clock on failure.
- Badly terminated keypad and loop detector wiring. Homeowner-installed entry keypads and loop detectors often trip the operator’s entrapment logic, causing the gate to reverse or refuse to close. A clean re-termination usually resolves it.
Pricing for Gate Repair in Savannah, GA
Gate repair prices in Savannah reflect two local realities: coastal corrosion shortens component life, and saturated soil demands deeper post work. A limit switch replacement runs $140 to $260. Control board replacement runs $220 to $480 depending on brand. A full slide gate realignment with post reset runs $225 to $475, and wrought iron hinge replacement runs $240 to $520. Every Calder job includes a written price before we touch a bolt, and the 365-Day Done Right Promise means a free return visit if the repair fails within a year. Call (903) 417-0793 for an exact quote, estimates are free.
We Also Serve Cities Near Savannah
If you’re outside Savannah proper but inside the coastal Georgia orbit, from Pooler and Rincon to Richmond Hill and Wilmington Island, our Gate Repair in Savannah crews cover the wider metro. Same written-price standard, same live 24/7 phone line, and the same 365-Day Done Right Promise wherever the gate stands.
Serving Savannah, GA - Our Local Coverage Area
We’re based in the Savannah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Savannah
The gate is drifting because the post footing is moving in Savannah’s sandy, high-water-table soil, not because the track adjustment failed. Shallow footings heave after heavy rain and rack the gate out of line within weeks. The real fix is resetting the post to a deeper bearing point, then re-leveling the track and re-testing the operator. If you’ve leveled it twice and it still drifts, the ground under the post is the problem. Call (903) 417-0793 and we’ll check the footing first.
Yes, every automatic gate in Savannah should have functioning safety photo-eyes, both for entrapment protection and because salt air and storm debris regularly dirty or misalign them. The operator’s reversal logic depends on clear photocell input, and a blinded or sun-faded set will make the gate reverse or refuse to close. We test and clean photo-eyes on every Savannah repair call and replace corroded ones with rated units.
A proper gate installation includes groundworks: post footings dug to the correct depth for coastal soil, conduit for power and safety-edge wiring, the operator mounted and travel-limited, and full photocell and reversal testing before handover. A quick repair addresses only the visible fault. In Savannah, skipping the groundworks is the most common reason new gate work fails within a season, because shallow footings heave in saturated ground. We always quote timed, scheduled installation work with a written price, so you know the full scope before we dig.
Welding the panel alone won’t fix a sagging wrought iron gate in Savannah because the sag almost always starts at the hinge side, where salt corrosion has seized the pin or wallowed out the hinge plate. We weld in new hinge plates, bush or replace the pins, and reset the post plumb before rehanging the gate. If we just ran a bead on the panel, the hinge would still bind and the gate would sag again within months.
We service nine major gate operator brands around Savannah, including Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. For Savannah customers we keep local stock of common Viking, Ghost Controls, and DoorKing parts so repairs move faster. If your opener is an older or less common unit, call (903) 417-0793 and we’ll identify it over the phone and confirm parts availability before we dispatch.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family serving Savannah and the Georgia lowcountry.