Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Savannah
A dead gate opener in Savannah puts your morning routine on hold and leaves your property exposed. Most gate repairs here run $180 to $480 before parts, and our techs reach most Savannah neighborhoods the same day you call. Whether your automatic gate won’t budge off the track, your keypad quit responding, or a post has tilted out of square, Calder Gate Repair fixes it with a written price before any work begins. Call (903) 417-0793 and a live person answers, books the visit, and gives you a trackable arrival time. No voicemail roulette, no four-hour windows, no invoice surprises.
Why Calder Gate Repair Is Savannah’s Preferred Gate Repair Company
Nico Alvarez leads our gate repair crew, and the reason Savannah homeowners call us back is simple: we show up when we say we will, diagnose the problem in plain English, and hand you a written price before turning a single bolt. We’re part of the Relay Home Co. family, established in 2009, with each location independently owned and operated. That means Savannah gets a local crew backed by a company that has spent sixteen years standardizing how gate repair should work.
Every Savannah job carries the 365-Day Done Right Promise. If the repair fails within a year, we come back at no charge. That’s written on every invoice, not buried in fine print. Our techs are background-checked and arrive in uniform, with a live arrival time you can track from your phone. Savannah residents tell us the same thing after every visit: the price we quoted at the door matched the invoice they paid from their phone. That’s the Relay Standard, and it’s how every job runs.
Driveway Gate Repair in Savannah
Driveway gate repair in Savannah usually means one of three situations: a gate that’s sagged off its hinges, an opener that hums but won’t move, or a safety sensor that trips for no reason. Most driveway gate repairs here run $200 to $480 for labor, with parts like hinges, brackets, or control boards added at what they cost us. We diagnose first, quote second, and you approve before we start. Never the other way around.
Sagging Swing Gates
A swing gate that drags on the driveway almost always traces back to a shifting hinge post. We re-align the gate, repair or replace worn hinges and brackets, and resecure the post if it has started to lean. Most sag repairs finish the same day we arrive.
Slide Gate Track and Roller Repair
Slide gates fail when rollers wear flat or the track fills with dirt and gravel. We clean or replace the track, swap worn rollers, and re-test the full open-close cycle. If the opener was strained while running on bad rollers, we check it too before we leave.
Gate Welding in Savannah
Gate welding in Savannah fixes the breaks that hardware alone cannot: a cracked frame rail, a fractured hinge mount, rust-through at the bottom of a gate leaf, or a post that snapped at ground level. Most mobile welding repairs here run $150 to $450 depending on whether we’re repairing in place or removing and reinstalling the gate panel. We never weld a gate still on its hinges when a safer setup exists, and we grind, prime, and paint every weld before we pack up.
Cracked Frames and Broken Hinge Mounts
Steel driveway gates in Savannah crack where the metal fatigues from repeated cycling and Texas heat. We v-groove the crack, weld it solid, and reinforce the backside with gussets if the section is load-bearing. The result is stronger than the original factory joint.
Rust-Through Repairs
When rust eats through the bottom rail, patching with plate steel buys you years of service for a fraction of a full gate replacement. We cut out the rot, fit a matching steel patch, weld it in, and coat the repair to match the rest of the gate. If the rust has compromised more than 30 percent of the gate, we’ll recommend replacement rather than patchwork.
Trusted Brands We Service in Savannah
Our technicians train on nine major opener brands, so the gate opener in your Savannah yard is almost certainly one we know cold. We regularly service DoorKing and Viking swing operators on local ranches, and Ghost Controls on residential driveway gates in subdivisions across the area. Because we keep common control boards, photocells, and limit switches stocked in our DFW dispatch warehouse, Savannah repairs don’t wait on a part shipped from California. When a DoorKing board fails on a Tuesday, we often have the replacement installed by Wednesday.
Common Gate Repair Problems We See in Savannah Homes
Savannah’s soil and climate create a predictable set of gate failures. Here’s what our techs see most often across the city:
- Tilted hinge posts from expansive clay: Savannah’s black clay soil shrinks during dry spells and swells after rain. That seasonal movement slowly pushes gate posts out of plumb, and a tilted post starts dragging the gate leaf. We fix this by re-setting the post in concrete below the active soil zone, not by simply re-tightening the hinge bolts.
- UV-baked control boards and photocells: North Texas sun punishes gate electronics. Photocells mounted on unshaded posts degrade faster here than in cloudier climates, and when a sensor fails, the gate either stops mid-cycle or refuses to close. We test the entire safety circuit and replace aged sensors before they strand the gate open.
- Rust at the post base from poor drainage: When water ponds around a gate post after a heavy Savannah storm, the base rusts from the inside out. We see this most on gates installed before the builder added proper grading. Repair means welding in a new base section and improving the drainage path so it doesn’t recur.
- Dragging wheels on slide gates: Gravel driveways and clay dust wear slide gate rollers faster in Savannah than on paved surfaces. When a wheel goes flat, the opener labors against extra resistance and eventually overheats. Swapping the rollers is quick; ignoring the drag turns a $200 fix into a $900 opener replacement.
One recent call came from a home near Elm Street where a LiftMaster swing gate had started popping and dragging on its hinge post. Our tech dug out the old footing and found the clay had shifted the post almost two inches out of vertical. We re-poured the footing with concrete set below the active soil zone, re-hung the gate, corrected the sag, and tested the safety photocell until it reversed on command. That gate now swings smoothly through its full arc, and the popping noise is gone.
Pricing for Gate Repair in Savannah, TX
Here’s what Savannah homeowners can expect to pay. A service call to diagnose a gate problem runs $75, credited toward the repair if you approve the work. Gate opener repairs typically land between $180 and $480 before parts. Gate welding runs $150 to $450 depending on whether we work in place or remove the panel. Post reset work, which Savannah’s clay soil makes more common here than in sandier ground, runs $400 to $900 with concrete and labor. Every estimate is free, written, and agreed to before we start. The invoice matches the quote. Always.
We Also Serve Cities Near Savannah
While this page is for Gate Repair in Savannah, our Gate Repair crews also cover homes and businesses in Houston, San Antonio, Dallas, and Fort Worth. If you’re a few miles outside Savannah city limits, call anyway. We’ll confirm coverage and get you scheduled with the same written-price guarantee.
Serving Savannah, TX - Our Local Coverage Area
We’re based in the Savannah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Savannah
The most common cause is post movement from Savannah’s expansive clay soil, which shrinks in dry weather and swells after rain. That seasonal cycle slowly tilts hinge posts, and a tilted post transfers the misalignment to the gate leaf, causing it to sag and drag. Re-setting the post in a concrete footing below the active soil zone fixes the root cause, not just the symptom. Call (903) 417-0793 for a free assessment.
Test it once a month. Place a small traffic cone or a weighted chair in the path of the closing gate and confirm the gate reverses direction before making contact. In Savannah’s UV-intense summers, photocells degrade faster than in milder climates, so a monthly test catches failing sensors before they strand the gate open. If your gate doesn’t reverse reliably, call (903) 417-0793 and we’ll test the full safety circuit.
Yes, for most repair calls. We dispatch Savannah jobs from our DFW office, and our techs reach most Savannah neighborhoods the same day for operator failures, stuck gates, and safety sensor faults. Post reset work and major welding may require a second visit since concrete must cure. We’ll tell you honestly on the call whether same-day is realistic, and the estimate is free either way.
Yes. Rack and pinion slide gate operators are common on larger Savannah properties, and we repair the operator, replace worn rack teeth, and re-align the pinion gear when the gate starts jerking or grinding. A misaligned rack wears the pinion prematurely, so we check both before declaring the repair complete. Call (903) 417-0793 for a quote on your specific setup.
A proper gate installation in Savannah includes concrete footings set below the active clay zone, a trenched power run to the operator, safety edges or photocells, and a full reversal test under load. Skipping any of these, especially the deep footing, leads to the tilted-post failures we fix all over the city. We never promise same-day turnaround on installations; a proper job takes measured time and a written price before we begin. Call (903) 417-0793 for a free measure and quote.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Savannah, TX.