Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Temple City
Gate repair in Temple City usually comes down to one of three things: a sagging swing gate, a slide gate that quit reversing, or an opener that hums but won’t move. Most repairs run $180 to $480, and we can typically get a technician out same day. Calder Gate Repair knows the older Temple City tracts, the sloped driveways off Las Tunas Drive, and the way our soil shifts season by season. If your gate is stuck, call (903) 417-0793 and a live person picks up, 24/7.
Temple City has a lot of single-family homes built when driveways were narrow and gates were built light. That means when a gate fails here, it’s rarely the panel. Our Gate Repair crews start by looking at what’s actually under the gate: the post, the footing, the track. Nico Alvarez leads the team, and he’ll tell you the same thing we tell every homeowner: a written price comes before any work starts, and it’s the price you pay, period.
Why Calder Gate Repair Is Temple City’s Preferred Gate Repair Company
Temple City homeowners call us because we show up with a real arrival time, not a four-hour window. Dispatch is coordinated from our Los Angeles office, and crews serve Temple City locally, so the person on the phone knows the streets you’re describing. Calls are answered by a live person around the clock, not a voicemail.
Our techs are background-checked and arrive in uniform. They’re factory-familiar with the brands Temple City homes actually use, including LiftMaster, Viking, Ghost Controls, and DoorKing. When a homeowner near Temple City Park told us their gate just needed a new battery, our tech found the real problem: a safety photocell knocked out of alignment and a track packed with grit. That’s the difference between replacing parts and fixing the gate.
Every job carries the 365-Day Done Right Promise. If the repair fails within a year, we come back at no charge. The Relay Standard applies to every visit: a live arrival time, before-and-after photos, and a digital invoice you can pay from a link. No vague promises.
Driveway Gate Repair in Temple City
Driveway Gate Repair in Temple City typically runs $220 to $480 on older single-swing gates, and most jobs are done in a single visit. The work usually involves correcting the hinge post, replacing worn hinges, and re-aligning the gate so it closes against the post cleanly. In Temple City, the older tracts around Las Tunas Drive were platted with narrow, sloped driveways, so most gates are short single-swing or sliding leaves. The weak point is nearly always the ground the post is set in, not the gate panel itself.
Hinge and Post Correction
A sagging gate on a sloped Temple City driveway rarely needs new hinges alone. The post has usually shifted because the footing was shallow to begin with, and seasonal moisture movement in the soil keeps working it loose. We dig, reset, and pour the post footing to proper depth, then re-hang the gate so it swings true. This is the repair that actually lasts here.
Gate Realignment and Track Cleaning
Slide gates pick up grit, leaf debris, and dust from the street, and over time the rack and pinion drive binds and strips teeth. We re-level the track, clear the debris, re-set the gate on its rollers, and test full open and close cycles. If you hear a grinding sound when the gate moves, stop using it and call us before the rack gets chewed up.
Gate Welding in Temple City
Gate Welding in Temple City is common on older steel and wrought-iron gates that have developed hairline cracks at stress points. Most on-site welding jobs run $150 to $350, depending on the length and location of the crack. Because Temple City gates sit close to the street and get rattled by cars and delivery trucks on the narrower residential roads, cracks at hinge welds and where the frame meets the post are frequent. We weld those on site, then grind and paint the repair so it blends.
Hinge Post Cracks and Frame Repair
We were called to a home two streets over from Temple City Park for a swing gate that wouldn’t close, and found a hairline crack at the hinge post weld, the kind that makes a panel look like the problem when it isn’t. We cut out the cracked section, welded the joint, and re-hung the gate the same afternoon. That gate is still swinging clean.
On-Site Welding vs. Shop Work
Most cracked frames on driveway gates can be welded on site, which saves you a crane truck and days without a gate. We bring the welder, shielding gas, and a portable grinder, and protect the surrounding area from sparks. If the crack is extensive, we’ll tell you straight whether the panel should come to the shop or be replaced entirely.
Trusted Brands We Service in Temple City
Temple City homes run a mix of opener brands, and our techs are factory-familiar with the ones you’re most likely to own. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common boards, limit switches, safety edges, and remote receivers for Viking, Ghost Controls, and DoorKing locally, so most Temple City repairs don’t wait on parts. When we don’t have a part on the truck, we order it same day and give you an honest timeline.
Common Gate Repair Problems We See in Temple City Homes
- Sagging swing gates with shallow footings. The older sloped driveways off Las Tunas Drive have posts set in footings that weren’t built for decades of soil movement. The gate drops, scrapes, and stresses the hinges until something gives.
- Slide gates that won’t reverse. A misaligned photocell or edge sensor, or a loop detector set wrong, disables entrapment protection. The motor still works, but the safety system doesn’t, and that’s a code violation you fix before someone gets hurt.
- Rack and pinion drives binding and stripping. Temple City streets and landscaping put grit and leaf debris onto slide gate tracks. As the track fouls and the gate drops slightly off level, the rack binds and the teeth strip.
- Openers humming but not moving. Capacitors fail, gearboxes wear, and limit switches, the small sensors that tell the gate when to stop, drift out of set. These are repairable on site, and you get a written price before we touch anything.
Pricing for Gate Repair in Temple City, CA
Here’s what Temple City homeowners can expect. Driveway gate repair runs $220 to $480 on most single-swing and slide gates, before any major components. Gate welding jobs run $150 to $350 on site. Opener repairs run $180 to $420, depending on whether it’s a limit switch, a gearbox, or a board. A full gate installation is different: that’s measured, ordered, and scheduled, with groundworks, power run, safety edges, and reversal testing all included in the written quote. You’ll get a free estimate before anything is ordered, and the price we quote is the price you pay. Call (903) 417-0793 and we’ll talk through your gate in plain words.
We Also Serve Cities Near Temple City
Calder Gate Repair serves Gate Repair in Temple City and the surrounding communities, including El Monte, San Gabriel, Arcadia, and Rosemead. If you’re just outside Temple City, call and we’ll confirm we can get a tech to you quickly. Our service area follows the neighborhoods, not the map lines.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Temple City
The hinges aren’t your problem, the post is. Temple City’s older sloped driveways off Las Tunas Drive have gate posts set in shallow footings, and our soil expands and contracts with seasonal moisture. Every wet winter and dry summer works the post loose, and the gate drops no matter how often you adjust the hinges. Hinge adjustment is a band-aid. The fix is pulling the post, pouring a deeper footing, and re-hanging the gate true. That’s a standard repair for us, and most jobs run $250 to $450. Call (903) 417-0793 to have us check whether your footing has shifted.
It’s both, and it’s a safety problem. Your gate’s entrapment protection, usually a photocell or safety edge, is out of alignment or the loop detector is set wrong. Until that’s fixed, the gate can’t legally or safely operate in auto mode. Most misalignment repairs run $180 to $300, and a loop detector replacement runs $250 to $420. We fix it same day and test the reversal before we leave. Don’t run the gate manually past the obstruction, and don’t disable a safety sensor to make it close. Call (903) 417-0793 for a written estimate.
Yes. We’re factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Temple City opener repairs are done same day with parts stocked locally, and we carry common boards and limits for the brands most homes here use. The brand matters less than the tech: we diagnose the opener’s actual fault and quote the repair before we start. Estimates are free, and the price is written down before any work begins.
Yes, most cracks on driveway gates can be welded on site the same day, usually $150 to $350. We bring our own welder and grinder, protect the area, and paint the welded joint to match. Cracks at hinge welds are the ones we see most on Temple City’s older iron gates, and they often look like a panel problem. We’ll tell you straight if a crack is compromising the frame enough that the panel should be replaced instead.
Most gate repairs in Temple City, including hinge and post correction, track cleaning, sensor realignment, and on-site welding, are done in one visit lasting two to four hours. Opener diagnostics and board or limit switch replacement usually fit the same day too. Full installations are different: those are measured, ordered, and scheduled. We never promise same-day turnaround on an installation, because proper groundworks, power, and safety testing can’t be rushed. For repairs, call (903) 417-0793 and we’ll give you a live arrival time today.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, serving Temple City with written pricing and the 365-Day Done Right Promise.