Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Temple City, CA
Gate repair in Temple City, CA runs about $95 to $1,850 depending on whether we’re adjusting a sensor, replacing a hinge, or rebuilding a slide gate track. Most opener failures and stuck-gate calls we handle same-day, and every job gets a written price before work starts. Calder Gate Repair covers the full range: mechanical fixes, electric gate diagnostics, and opener replacements across Viking, Ghost Controls, DoorKing, and Elite systems. If your gate is down, call (903) 417-0793 and a live person answers, day or night.
Why Temple City Homes Are Different
Temple City’s housing stock runs older than a lot of the San Gabriel Valley neighbors. Many properties were built from the 1940s through the 1970s, which means a lot of driveway gates on original steel posts, older masonry piers, and electrical runs that predate modern code. When a gate post shifts in Temple City, it’s rarely the post alone. It’s usually years of soil movement, a root system underneath, and hardware that was mounted long before operators came with safety edges and photocells.
The climate does its share too. Summer heat in the low 90s bakes exposed gate control boards, and the occasional heavy rain year softens the ground enough to change how a gate sits on its hinges. Vegetation also plays a role. Many Temple City properties have mature trees close to driveways, and roots growing against gate tracks or under operator pads are a common cause of binding. We check for that on every stuck-gate call here, because it’s often the real problem behind what looks like a burned-out motor.
Our Main Temple City Services
Most Temple City calls come down to three things: a gate that won’t open, a gate that makes noise or moves wrong, or an opener that responds intermittently. Each has its own dedicated page with local pricing and specifics.
Gate Repair in Temple City
Stuck gates, sagging gates, broken hinges, worn rollers, bent tracks. In Temple City, the age of the gate hardware often decides the fix. Steel gates on older posts tend to pull hinges out of the wood or concrete over time, and we repair that by re-securing with proper anchors rather than forcing the gate back into alignment. One local note: if your gate drags at the latch side every summer, it’s usually post lean from dry soil, not a bad wheel. We fix the cause, not just the symptom. See Gate Repair in Temple City for full details.
Electric Gate Repair in Temple City
This covers the powered side: wiring, control boards, safety loops, photocells, and power supplies. Temple City’s older neighborhoods often have gate wiring run in metal conduit that’s been underground for decades, and corrosion at a junction box is a frequent culprit when an electric gate goes dead. We trace the circuit, find the fault, and replace only what failed. No panel-swapping guesses. Details are on the Electric Gate Repair in Temple City page.
Gate Opener Repair in Temple City
When the motor runs but the gate doesn’t move, or the remote works only from ten feet away, it’s usually the opener. We work on DoorKing, Viking, Ghost Controls, Elite, and the other major brands homeowners actually have. Best part about Temple City jobs: opener replacements here don’t usually require new gates or posts, just a new operator, new arms, and recalibration. Learn more at Gate Opener Repair in Temple City.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Temple City
We stock common parts for DoorKing, Viking, Ghost Controls, and Elite openers, so most Temple City repair jobs don’t wait on shipping. If your opener is older or discontinued, we source it same-week. See our brands for the full list.
Pricing for Gate Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Gate opener repair | $95 – $390 |
| Gate opener replacement | $590 – $1,150 |
| Slide gate roller replacement | $140 – $320 |
| Hinge replacement or weld-up | $120 – $280 |
| Rack repair or replacement | $185 – $420 |
| Gate wheel or caster replacement | $90 – $240 |
| Limit switch replacement | $95 – $210 |
| Safety sensor or photo eye repair | $85 – $190 |
| Chain or belt drive repair | $110 – $260 |
| Overhead gate track realignment | $130 – $290 |
What pushes a Temple City repair toward the high end? Usually a gate that’s also out of alignment, a post that needs re-securing, or wiring that’s been patched before and needs a proper junction box replacement. The price you’re quoted before we touch anything is the price you pay. No discoveries, no surprises, no invoice that doesn’t match the number you already approved.
Neighborhoods We Serve in Temple City
Calder Gate Repair covers all of Temple City, including these areas:
- Rosemead Blvd corridor
- Las Tunas Dr neighborhoods
- Oak Ave residential pockets
- Temple City northern neighborhoods
- Longden Ave vicinity
Our typical response window for Temple City is same-day when you call before noon, and next morning for afternoon calls. Emergency calls are answered live 24/7 and dispatched as soon as a tech is available.
Service Area – Cities Near Temple City
We also cover the surrounding cities of El Monte, CA, San Gabriel, CA, Arcadia, CA, and Rosemead, CA. Each of those pages has its own local pricing and neighborhood breakdown.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Temple City
If you call before noon on a weekday, a Temple City gate tech can usually reach you the same day. Afternoon calls typically schedule for next morning. Emergency calls, like a gate stuck open or a car trapped behind a closed gate, are prioritized 24/7. Call (903) 417-0793 and a live person gives you a real arrival window, not a four-hour block.
Most gate repairs and opener replacements don’t need a permit because we’re replacing like for like on existing posts and operators. New driveway gates or major changes to a wall-mounted gate sometimes trigger a city review. We can tell you up front what applies to your property.
Yes. We run Saturday and Sunday schedules for Temple City homeowners who can’t take a weekday off. The phone line is answered live 24/7, so you can book a weekend appointment any evening. The written quote and the 365-Day Done Right Promise apply to weekend jobs the same as any other.
Call Calder Gate Repair at (903) 417-0793 for a free estimate on any gate, electric gate, or gate opener repair in Temple City. We quote the price before work starts, we guarantee the repair in writing for 365 days, and we come back free if it fails. A live person answers around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.