Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Temple City
An electric gate that won’t open isn’t just an inconvenience. It blocks your car in the driveway, leaves your property unsecured overnight, and turns every errand into a frustration. Electric gate repair in Temple City runs $185 to $440 for most opener and motor fixes, with parts priced separately and quoted upfront. Call (903) 417-0793 and a live person answers, 24/7, no phone tree.
We know Temple City’s streets. Las Tunas Drive, Workman Avenue, the neighborhoods wedged between Rosemead and Baldwin. When your gate fails, you don’t get a vague four-hour window. You get a background-checked, uniformed tech with a trackable arrival time and a written price before the first bolt turns.
Why Calder Gate Repair Is Temple City’s Preferred Electric Gate Repair Company
Temple City’s housing stock runs older. Most of the single-family tracts were built out by the 1960s, which means original driveway loops cut into old concrete, shallow hinge post footings, and gate operators installed before modern entrapment protection was code. That’s the work we see every week. Our Electric Gate Repair team arrives knowing which failure points to check first, because we’ve been through these same gate setups on dozens of Temple City properties.
Calder Gate Repair is part of the Relay Home Co. family, founded in 2009, and each location is independently owned and operated under the Relay Visibility Guarantee. What that means in Temple City: a tech dispatched with a live arrival time you can track on your phone, before-and-after photos of the repair, and a digital invoice you pay from a link. No paper shuffle. No phone tag. No second-guessing who’s coming.
Every Temple City repair carries the 365-Day Done Right Promise in writing. If the repair fails within a year, we return and fix it at no charge. That’s the guarantee, stated plainly, on every job.
Commercial Gate Operator in Temple City
A commercial gate operator in Temple City is a heavier-duty motor and control system built for gates that cycle more times a day than a residential gate sees in a month: apartment complexes off Temple City Boulevard, church parking lots, small retail properties near Rosemead Boulevard. These operators, typically Linear or Viking units in our service area, handle frequent opening cycles, heavier gate panels, and often require loop detectors, keypads, and intercom tie-ins all working together.
Loop Detection and Access Integration
On Temple City commercial properties, the gate isn’t just a gate. It’s tied to a loop detector cut into the driveway asphalt, a keypad or card reader, and sometimes a phone-based entry system. When the gate stops responding, the fault is often in that integration, not the motor itself. We diagnose the full chain: loop, controller, operator, and power.
Heavy-Cycle Operator Replacement
When a commercial operator does need replacement, we quote the unit, the labor, and the programming as separate line items. Expect a commercial operator swap in Temple City to run $980 to $2,400 before parts, depending on gate weight, operator brand, and whether the existing foundation can be reused. The price is written and agreed before work starts.
Automatic Gate Repair in Temple City
Automatic gate repair in Temple City means diagnosing why a gate that should open on command won’t move, stops halfway, or reverses for no reason. It covers swing gates on the older Las Tunas-area homes, slide gates where driveways are too narrow for a swing arc, and everything wired to the operator: keypads, remotes, loops, and safety sensors.
Operator Arm and Hinge Post Repairs
Temple City’s 1950s and 60s driveways often have hinge posts set in footings that were poured shallow and have since cracked or settled. The gate sags. The operator arm keeps getting adjusted to compensate, but that strains the motor until it burns out. The fix isn’t another arm adjustment. It’s pulling the old post, pouring a deeper footing, re-leveling the gate, and only then re-setting the operator. We did exactly this on Las Tunas Drive recently, on a LiftMaster swing gate that had been sagging for months. The homeowner had kept adjusting the arm. The real failure was at the hinge post, where the footing had settled after years of the gate slamming into reversal. We cut out the old post, poured a deeper footing, corrected the sag, re-leveled the operator arm, and re-ran the safety photocell and edge reversal test before calling it done.
Safety Sensor and Control Board Diagnosis
Automatic gates in California must meet UL 325 entrapment protection standards. That means working photocells, working edge sensors, and force settings that reverse the gate before it can pin a person or car. When a control board fails or a sensor misreads, the gate behaves erratically. We test the full safety circuit before and after every automatic gate repair in Temple City, not just the motor.
Trusted Brands We Service in Temple City
Most Temple City gates run on DoorKing, Linear, or Ghost Controls hardware, and our techs are factory-familiar with all three, plus six other major opener brands. We keep common control boards, limit switches, remotes, and safety sensors stocked locally so most Temple City repairs finish in one visit. If your opener is a DoorKing slide operator on Rosemead Boulevard or a Linear swing arm near Live Oak Park, we already know its failure patterns.
Common Electric Gate Repair Problems We See in Temple City Homes
- Settled hinge posts on older driveways: The 1950s-era tracts around Las Tunas Drive often have shallow footings that crack and settle. The gate sags, drags, and eventually kills the operator, no matter how many times you adjust the arm.
- Loop detector faults from cracked concrete: Original driveway loops were cut into concrete that shifts seasonally. When the loop reads wrong, a swing gate won’t open when a car pulls up or closes on a car it shouldn’t.
- Keypad and remote failures on dial-up systems: Older DoorKing and Linear operators wired to outdated keypads fail in ways that confuse the controller. The gate stops responding when a code is entered, or fires only when the remote is held inches from the receiver.
- Missing entrapment protection on retrofitted gates: A homeowner swaps in a new keypad or opener on a gate that never had photocells or edge sensors. The gate runs, but it’s not UL 325 compliant. That’s a safety gap, not a technicality, and we flag it on every Temple City call.
Pricing for Electric Gate Repair in Temple City, CA
Most electric gate repair jobs in Temple City fall between $185 and $440 in labor, with parts quoted separately before any work begins. A keypad replacement typically runs $140 – $260. A remote control programming or receiver fix sits around $95 – $180. Loop detector repairs run $220 – $400 depending on whether the loop itself needs re-cutting. A control board replacement lands between $380 – $750 including the board. Full automatic gate operator replacements start around $950 and go up based on gate weight, brand, and access integration. No number changes at the door. The written quote is the invoice.
We Also Serve Cities Near Temple City
Our Electric Gate Repair in Temple City coverage extends through the surrounding San Gabriel Valley. If you’re in El Monte, San Gabriel, Arcadia, or Rosemead and your gate won’t open, the same live-answer phone line, trackable arrival times, and 365-Day Done Right Promise apply. Call (903) 417-0793 and we’ll send a tech with a written price.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Temple City
No, and we won’t pretend otherwise. A proper automatic gate installation in Temple City involves groundworks, power runs, safety edge mounting, and float steering testing. That’s measured, ordered, and scheduled work, typically spanning one to two days on site plus prep. What we do promise is a free measure and a written, line-item price before you commit. Call (903) 417-0793 to set that up.
Usually the gate. In Temple City’s older home tracts, the hinge post footing settles or cracks, which drops the gate onto its arc path. The operator works harder, overheats, and eventually fails. We diagnose by loading and leveling the gate for actual weight distribution, then measure the post for plumb. If the post is the fault, we fix the post first. Then we service the operator.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Temple City specifically, DoorKing and Linear dominate the older slide and swing installations, and we stock their common parts locally. If it opens gates and runs on a circuit board, we work on it.
Yes. California automatic gates fall under UL 325 safety standards, which require entrapment protection like photocells and edge sensors, and the gate must reverse when force limits trip. If your gate is older, it may not have these, and if it’s been retrofitted with a new opener by someone who skipped this step, the gate may be running out of compliance. We test the full safety circuit on every automatic gate repair call in Temple City.
Yes. Loop detector faults are common on Temple City slide gates because the original driveway loops were cut into concrete that cracks and shifts through the seasons. We can test the loop, determine if it’s a detector failure or a broken wire loop, and re-cut the loop if needed. Keypad and intercom entry problems we handle the same visit, same written price. Call (903) 417-0793 and we’ll diagnose it.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Temple City and the surrounding San Gabriel Valley.