Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across The Hammocks
Gate repair in The Hammocks usually means one of three things: a gate that won’t open after an afternoon storm, a gate that sags and scrapes against the driveway, or an operator that hums but won’t move. Most repairs run $185 – $475 depending on what failed, and our crews arrive with the parts for LiftMaster, FAAC, BFT, and Linear already on the truck. We know the neighborhoods west of SW 137th Avenue and south of SW 104th Street, and we answer the phone 24/7 at (903) 417-0793. If your gate is stuck open or stuck closed, call now.
Why Calder Gate Repair Is The Hammocks’s Preferred Gate Repair Company
Calder Gate Repair is the dedicated gate repair specialist inside the Relay Home Co. family, which has been operating since 2009. Led by Nico Alvarez, our technicians are background-checked, uniformed, and dispatched with a live arrival time you can track on your phone. No four-hour windows. No phone tag.
What sets us apart in The Hammocks is that we put every price in writing before the first tool comes off the truck. The number we quote at the door is the number on the invoice. If the repair fails within 365 days, we return free under our 365-Day Done Right Promise, which is stated in writing on every single job. That’s a guarantee most gate repair companies won’t put on paper. We do.
Residents around Hammocks Boulevard, the Country Walk area, and the communities near SW 120th Street call us because we stock the replacement boards, photocells, hinges, and capacitors that fail most often in this climate. That means less waiting on parts and fewer second trips.
Commercial Gate Repair in The Hammocks
Commercial Gate Repair in The Hammocks covers the sliding and swing gates on apartment complexes, HOA entrances, storage facilities, and small business lots. These gates cycle hundreds of times a day, and when one fails, it backs up traffic and creates a security hole. A typical commercial gate repair in this market runs $350 – $900 depending on whether the operator, the ground track, or the safety loop is involved. We show up ready to diagnose the specific brand and failure mode, then quote a written price before any work starts.
Sliding Gate Track and Roller Work
Rainwater puddles under a commercial sliding gate and eats away at the concrete pad and steel track. When the rollers bind or the track rusts out, the operator strains and eventually burns a motor. We repair or replace track sections, reset level pads, and realign rollers so the gate glides instead of groans.
HOA and Access Control Integration
Many communities in The Hammocks run their entry gates through DoorKing or Linear access systems with phone apps, keypads, and vehicle loops. When the gate won’t respond to a resident’s remote, we trace the issue through the receiver, loop detector, and control board to get the entry point working again without a total system swap.
Iron Gate Repair in The Hammocks
Iron Gate Repair in The Hammocks addresses the structural issues that come with heavy ornamental gates and South Florida weather. A sagging iron gate is usually not a motor problem. It’s a hinge problem, a rusted post problem, or a footing problem. Our team repairs or replaces worn hinge pins, shims and welds cracked joints, treats rust, and repaints the affected area so the gate doesn’t just work again but looks like it belongs in front of a kept home. Expect to spend $225 – $600 for most structural iron gate repairs; full post re-setting with new concrete runs higher.
Hinge and Post Repair
The screw-in hinges on iron gates wear looser every time a gate opens and closes. Once the gate sags enough to drag on concrete, it stresses the operator and ruins the gear train. We replace the hinges, shore up the post, and re-hang the gate square before the motor takes more damage.
Weld and Rust Repair
Ocean-adjacent air in parts of The Hammocks accelerates surface rust on iron gates, especially near sprinkler overspray. We grind back active rust, weld reinforced plates where corrosion has thinned the steel, and coat the repair so the gate holds up through the next several wet seasons.
Trusted Brands We Service in The Hammocks
Our techs work on FAAC, BFT, and Linear nearly every week in The Hammocks, along with LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Stock local parts matter. When your FAAC control board fries after a lightning-adjacent surge or your Viking arm actuator seizes, we typically have the replacement part in our local stock or can source it the same day. That’s the advantage of a dedicated gate repair specialist built inside the Relay Home Co. network, which has carried these brands since 2009.
Common Gate Repair Problems We See in The Hammocks Homes
- Waterlogged safety photocells. The afternoon thunderstorms that drop two or three inches of rain in under an hour force water into the photocell housing. The gate then refuses to close because it thinks something is in the way, or ignores the safety input and slams shut. We replace the waterlogged sensor and reseal the housing against future downpours.
- Rusted hinge posts in the sandy soil. The Hammocks sits on fast-draining, sandy ground, which sounds dry but traps moisture at the base of steel posts. The post rusts loose inside its concrete footing, the gate sags, the motor strains, and eventually the whole assembly binds. We reset the post in new concrete and re-hang the gate square.
- Lightning-adjacent surge damage. Storms that pass close to The Hammocks send voltage spikes through the power lines. The control boards on LiftMaster and FAAC operators absorb the hit and go silent. The gate is stuck open or closed with no warning. We replace the fried board and install a surge protector so the next storm doesn’t repeat the job.
- Sagging gate dragging on the driveway. This starts as a scraping sound and ends as a burned-out motor. The cause is almost always a loose hinge post or a worn hinge, not the operator itself. Fixing the structural sag before the motor dies is a $200 – $400 repair; replacing a motor after it burns is closer to $600.
Pricing for Gate Repair in The Hammocks, FL
Here’s what you can expect to pay in The Hammocks. Hinge and post repair typically runs $225 – $600 depending on whether the post needs to be pulled and re-set. Safety photocell replacement runs $165 – $280 including parts. Control board replacement for a LiftMaster or FAAC operator runs $290 – $550. A full operator swap runs $650 – $1,400 installed. The price you’ll pay is quoted and agreed in writing before any work starts. Call (903) 417-0793 and we’ll give you a free estimate for your specific gate and problem.
We Also Serve Cities Near The Hammocks
We’re part of the Relay Home Co. family with dispatch coordinated from our Miami South FL office, so our crews serve The Hammocks locally and also cover nearby communities. If you’re searching for Gate Repair outside The Hammocks, we serve Jacksonville, Miami, Tampa, and Orlando with the same written pricing and trackable arrival times. Gate Repair in The Hammocks is our local specialty.
Serving The Hammocks, FL - Our Local Coverage Area
We’re based in the The Hammocks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in The Hammocks
The most common reason is water getting into the safety photocell or the operator’s control box after one of The Hammocks’ heavy afternoon downpours. A shorted photocell makes the gate think something is in the path and it refuses to close, while a water-damaged control board leaves the whole operator dead. We replace the water-damaged component and reseal the housing for this specific weather pattern. Call (903) 417-0793 for a written quote.
No, in most cases the operator is fine and the problem is structural: a hinge post that has rusted loose in its footing or wear on the hinge pins. Repairing the post and re-hanging the gate typically costs $225 – $600, far less than a new gate. If you wait until the sagging burns out the motor, the job becomes a $650 – $1,400 operator replacement.
A proper installation includes excavating and pouring footings for the posts, running power to the operator, mounting the gate square on new hinges, installing the operator with travel limits set correctly, fitting safety photocells, and performing reversal testing on multiple cycles. We quote installations as a measured, scheduled job with a written price, not a same-day promise. Call for a free measure and estimate.
Safety photocells are the sensors that detect a person, child, or car in the gate’s path and reverse the gate before it contacts them. Florida sees constant gate traffic around pools, driveways, and rear entries, and without working photocells an automatic gate can close on a person or a vehicle. We test every photocell on every repair and replace any that don’t trip the reversal properly.
A lightning-adjacent surge likely fried the operator’s control board. This is one of the single most common storm repairs in The Hammocks. Replacement boards run $290 – $550 for LiftMaster and FAAC operators, and we install a surge protector alongside the new board so the next storm doesn’t repeat the failure. Call (903) 417-0793 and we’ll get a tech out with the part on board.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving The Hammocks since joining the Relay Home Co. family in 2009.