Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Webster
Gate repair in Webster, TX typically runs $180 – $480 for most mechanical and electrical fixes, and we can usually have a technician at your door the same day you call. If your gate is sagging, dragging, or the opener just stopped responding, the faster we see it, the less damage it does to hinges, posts, and the motor. Calder Gate Repair covers every neighborhood in Webster, from the older subdivisions along NASA Parkway to the newer streets off FM 270, and we answer the phone 24/7 at (903) 417-0793.
What makes gate work different in Webster is the soil. More on that below, but the short version: clay expands, posts shift, and gates that were perfectly level in April are dragging by September. We have fixed enough of them here to spot the difference between a motor problem and a footing problem in about five minutes, and that diagnosis is why our repairs tend to hold up.
Every job starts with a written price before any work begins. The number on the invoice is the number you agreed to at the door. And if the repair fails within 365 days, Calder returns at no charge under our 365-Day Done Right Promise. That is not a sales pitch; it is printed on every work order we hand you.
Why Calder Gate Repair Is Webster’s Preferred Gate Repair Company
Calder Gate Repair is part of the Relay Home Co. family, established in 2009, and each location is independently owned and operated under The Relay Visibility Guarantee. That guarantee is the reason Webster homeowners know exactly who is coming, when they will arrive, and what the repair will cost before a single bolt gets turned. You can track our technician’s arrival like a rideshare, not a vague “we’ll be there between noon and whenever.”
Nico Alvarez leads the Calder team, and the standard he set is simple: background-checked technicians in uniform, a live person on the phone at 3 a.m. if that is when you call, and a written price before we touch the gate. Our technicians train on nine opener brands, including FAAC, BFT, Linear, and Viking, so when a Webster customer says “the gate just beeps and does nothing,” we know which brand’s control board is in front of us and what it should be doing.
We also understand the local failure patterns. The houses between Clear Creek and Friendswood sit on expansive clay that moves with every Gulf humidity cycle. A gate that sags in spring has usually been pushed out of alignment by a shifting post footing, and tightening the hinges only masks the real problem. That local knowledge means we fix the cause in Webster, not the symptom.
Sliding Gate Repair in Webster
Sliding gate repair in Webster usually means a gate that has started binding on its track or a motor that strains and trips its breaker. On the lots along Bay Area Boulevard and the streets off Highway 3, driveways tend to be longer and slide gates are common, which means wet winters and clay soil push track sections and footings slightly out of line. A sliding gate that ran smooth for years then suddenly grinds is almost never a motor failure. It is geometry. The track moved, the gate now fights the rollers, and the motor draws too much current trying to force it.
Most sliding gate repairs in Webster run $220 – $520 depending on whether we are realigning track, replacing rollers, or rebuilding a footing. Operator repairs add labor and parts on top of that, but we always quote the complete job before starting.
Track Realignment and Roller Replacement
When a Webster sliding gate drags, we check the track first. A quarter inch of settlement under one section is enough to make the gate motor labor. We re-level the track, replace worn rollers, and confirm the gate glides with two fingers of pressure before we call it done.
If the footing has shifted, re-setting it takes concrete and time, not just a wrench. We tell you that upfront, with a written price, so you are not surprised by a half-day job when you expected an hour.
Viking and BFT Operator Repair on Slide Gates
Viking and BFT slide operators are common across Webster, and both brands have a weak point: limit switches. Those are the small sensors that tell the gate when to stop. Coastal humidity and the fine grit that blows off the bay accelerate corrosion on those switches. If your gate stops short or overshoots and reverses, the limit switch is usually the culprit, not the motor.
We stock replacement switches and control boards for both brands locally, so most operator repairs on Webster slide gates are same-day jobs.
Wrought Iron Gate Repair in Webster
Wrought iron gate repair in Webster is less about the metal and more about what the metal is attached to. The ornamental iron itself is tough. The posts, the hinges, and the welds where the gate hangs are what fail, especially on the older custom gates in neighborhoods like Edgewater and along NASA Parkway. Webster’s expansive clay heaves the post footings, which puts the entire weight of the gate on one hinge leaf. That is why we see bent hinge pins and stress cracks at the weld points long before the iron bars themselves show any wear.
Most wrought iron repair work in Webster falls between $180 – $450 for hinge replacement, sag correction, and weld repair. Rust repair and refinishing adds $150 – $400 depending on the affected area. We will give you the exact number in writing before we start.
Hinge and Post Repair
The typical Webster call is a gate that has dropped an inch or two and now scrapes the driveway. Someone tightens the hinge bolts, and it holds for a month, then drops again. What actually happened is the post footing moved. We re-set the post in a deeper footing, re-hang the gate, and align the latch so it closes cleanly.
If we find a crack in the iron at a weld point, we repair it same day with a mobile welder if the gate can be done in place, or we quote removal and shop work for bigger structural breaks.
Rust Repair and Refinishing
Rust on wrought iron gates in Webster is accelerated by salt air, especially within a mile or two of Clear Lake. Left alone, surface rust becomes pitting, and pitting weakens the metal at the exact points where the gate carries weight. We grind out the corrosion, treat the area, and match the finish for a repair that stops the spread.
If your gate has rust bleeding down the pickets after every rain, the fix is mechanical now and cosmetic after. Get it done before the rust reaches the welds.
Trusted Brands We Service in Webster
Calder Gate Repair technicians are factory-familiar with the brands actually installed across Webster, and that starts with FAAC, BFT, Linear, and Viking. A FAAC hydraulic operator from a Clear Lake custom home behaves nothing like a Viking slide operator from a Bay Area Boulevard rental property, and we train on the differences instead of charging you to learn on your gate. We carry control boards, limit switches, photocells, and remotes for these brands on our trucks, which is why so many Webster repairs are done in one visit rather than two. If your opener is from a brand you do not see here, call anyway. We service nine major manufacturers and we will tell you honestly if your unit is worth repairing before you spend a dollar.
Common Gate Repair Problems We See in Webster Homes
- Sagging swing gates from clay soil movement. Expansive clay under Webster swells in spring rains and shrinks in summer heat, which rocks gate post footings just enough to drop a gate onto the driveway. Tightening hinges does not fix a moving post. The footing has to be re-set.
- Photocells knocked out of alignment by coastal wind and debris. Driveway gates near Clear Creek and the bay take wind, salt spray, and the occasional palm frond. A dirty or misaligned safety photocell makes the gate refuse to close, reverse for no reason, or beep and stop mid-travel. Cleaning and re-aiming the sensors is a 20-minute fix that gets your gate running again.
- Operator binding on slide gates after wet winters. Webster’s slide gates sit on tracks that settle when the ground gets saturated. When the track sags, the gate roller fights it, and the operator draws double current trying to push through. The motor is not weak. It is working against a shifting rail, and the fix is track or footing correction, not a new opener.
- Weld breaks on older ornamental iron. Wrought iron gates built in the 1980s and 1990s around Webster’s established subdivisions often crack at the top hinge or mid-rail weld. Years of clay-driven post movement flex the iron at one point until it snaps. We repair the break and address the footing so the new weld is not stressed the same way.
Pricing for Gate Repair in Webster, TX
Here is what Webster homeowners can expect to pay before parts. Sliding gate track and roller repairs run $220 – $520. Wrought iron hinge and post repairs run $180 – $450, and rust repair or refinishing adds $150 – $400. Gate opener diagnostics and common electrical repairs, like limit switches, photocells, and control board replacements, run $180 – $480 before parts. Full operator replacement, when your motor is genuinely beyond repair, starts around $900 installed depending on the brand and the gate type. Every price is quoted in writing before work starts, and that written price is the one you pay. Call (903) 417-0793 for a free estimate on your gate, including an honest read on whether repair beats replacement.
We Also Serve Cities Near Webster
Calder Gate Repair serves Webster and the surrounding bay communities. If you are in Friendswood, League City, Seabrook, or Pearland, our Gate Repair team covers those areas with the same written pricing, 365-Day Done Right Promise, and same-day availability we bring to Gate Repair in Webster. Dispatch and scheduling are coordinated from our Houston office, and crews serve Webster locally.
Serving Webster, TX - Our Local Coverage Area
We’re based in the Webster area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Webster
The hinge is not the problem; the footing is. Webster’s expansive clay swells and shrinks with gulf humidity, which moves the post the gate hangs from. Tightening hinge bolts cannot compensate for a post that has tilted, so the gate drops again within weeks. The permanent fix is to re-set the post footing, re-hang the gate, and then align the latch. If your gate has sagged twice in a year, call (903) 417-0793 and we will check the post before touching a hinge.
Your gate should have two independent safety systems: a pair of photocells across the gate opening and an edge sensor or reversing mechanism that stops and reverses the gate if it contacts something. On Webster gates near the bay, salt air and wind-blown debris often knock photocells out of alignment, and you will see the gate refuse to close or reverse partway. Calder technicians test both systems on every automatic gate repair, because a gate that closes on a car or a child is a liability no one in Webster can afford. If your gate has ever closed on something without reversing, call us before running it again.
Yes, and most operators on Webster sliding gates can be repaired rather than replaced. Limit switches, control boards, photocells, and even motors are replaceable parts on brands like Viking, BFT, Linear, and FAAC. We diagnose the specific failure and quote the repair in writing, so you are never pushed into a full replacement you do not need. Call (903) 417-0793 and tell us the brand on the side of the operator; we will tell you what the common failure is for that unit before we even arrive.
No, and no reputable gate company does. A new gate in Webster involves post footings that must cure, usually a power run to the operator, and safety edge and photocell installation, all of which is measured, ordered, and scheduled. What we offer is a free measure and a written installation price with a scheduled date, not a rushed job that gets poured wrong the day you call. If your existing gate needs repair today, same-day service is available. For new installations, call (903) 417-0793 and we will come measure this week.
Calder Gate Repair works on nine major gate opener brands, including FAAC, BFT, Linear, and Viking, which are the most common operators on Webster gates. We also service LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians train on the specific failure points of each brand, so a Viking slide operator gets diagnosed differently than a FAAC hydraulic swing arm. If your operator brand is not listed, call anyway. We will identify it and tell you honestly if it is repairable.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Webster, TX.