Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Webster, TX
Calder Gate Repair is the gate company Webster homeowners call when a driveway gate won’t open, a keypad quits, or an opener starts grinding. We’re a dedicated gate repair specialist inside the Relay Home Co. family, founded in 2009. Most Webster gate repairs run between $180 and $340 before parts, and we put that price in writing before a single bolt is turned. Call (903) 417-0793 and a live person answers, day or night.
Why Webster Homes Are Different
Webster sits right at the top of Galveston Bay, which means two things for your gate: salty, humid air and occasional high wind events. Galvanized steel tracks and hinges corrode faster here than they do 20 miles inland, so we regularly replace rust-seized components that still look fine on the outside. Newer subdivisions like Bay Colony and Lakeside have HOA-governed gates, and several of those communities ask for repairs that match the original hardware finish precisely. Older properties along NASA Road 1 and Highway 3 tend to be custom-built sheet or iron gates on standalone posts, often with opener wiring that wasn’t run through conduit. When wind drives rain sideways, we see water intrusion into the control board much more often in Webster than in dryer parts of the metro. Our crews carry dielectric grease, marine-grade fasteners, and sealed wire nuts as standard on every Webster job because they know what the bay does to exposed metal. Nico Alvarez, who leads Calder Gate Repair, insists on treating every Webster gate as a coastal installation, not a generic Texas one.
Our Main Webster Services
The three calls we take most often from Webster are for gates that stick halfway, openers that click but won’t move, and electrical failures after storms. Each service has its own Webster page below, with local pricing and same-week scheduling details.
Gate Repair in Webster
A swinging or sliding gate that won’t close leaves your Webster home exposed, and a sagging gate sitting on its wheels grinds the chain and burns out the motor over time. We rebuild sagging frames, replace bent hinges, reset posts that have shifted in Webster’s clay-heavy soil, and get wheels and rollers running smooth again. Bay-area humidity means we check for corrosion at every moving joint, not just the obvious break. Gate Repair in Webster covers full diagnostics, on-site fixes, and the written 365-Day Done Right Promise.
Electric Gate Repair in Webster
When a Webster gate has power but won’t budge, the problem is usually a failed limit switch, a shorted photo-eye, or moisture in the control board. We trace the circuit, identify the failed component, and replace it with weather-sealed parts rated for coastal exposure. Underground wiring along Webster’s older streets is prone to breaks from root growth and shifting soil, and we locate those faults with a tracer before any digging happens. Electric Gate Repair in Webster walks through the full electrical diagnostic process.
Gate Opener Repair in Webster
Webster owners run openers from brands you already know: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We board-level swap or replace on the spot, carry the most common control boards and capacitors in the truck, and pair new remotes or keypads to your existing opener. A bad capacitor or relay is a 45-minute fix; a fried board might mean ordering a replacement same-week. Gate Opener Repair in Webster covers brand-specific diagnosis and replacement options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Webster
We’re factory-familiar with nine leading opener brands, and we keep common FAAC, BFT, Linear, and Viking parts in the truck for same-visit swaps. When a Webster customer’s control board is fried, we can usually quote a replacement within the hour. See our brands for the full line-up.
Pricing for Gate Company in Webster, TX
| Service | Typical range in Webster |
|---|---|
| Gate opener repair (motor, board, or gear replacement) | $180 – $340 before parts |
| Electric gate repair (wiring, sensors, control panel) | $180 – $340 before parts |
| Gate repair (hinges, track, sagging frame) | $180 – $340 before parts |
| Control board replacement (FAAC, BFT, Linear, Viking, LiftMaster) | $220 – $420 including parts |
| Limit switch replacement | $120 – $220 including parts |
| Photo-eye or safety sensor replacement | $110 – $210 including parts |
| Keypad or remote programming (1-2 units) | $60 – $140 |
| Gate sensor or loop detector replacement | $180 – $340 including parts |
| Full opener replacement (motor, arms, track, and installation) | $700 – $1,400 including parts |
| Gate post reset or concrete pour (single post) | $250 – $500 including materials |
Bay-area corrosion and HOA finish requirements are the two things that push Webster pricing toward the upper end of these ranges. Whatever the quote, you get a written price before any work starts, and the number on the invoice is the number you agreed to at the door.
Neighborhoods We Serve in Webster
We run calls across all of Webster, and most areas get same-day or next-day service depending on the time of day you call. Our techs know which subdivisions have HOA-specific hardware and which older streets have wiring that’s more trouble than it should be.
- Bay Colony
- Lakeside
- Western Oaks
- Brookwood
- Clear Creek Forest
Service Area – Cities Near Webster
Beyond Webster, we cover the surrounding bay-side communities with the same written-price and 365-Day Done Right Promise. That includes Friendswood, TX, League City, TX, Seabrook, TX, and Pearland, TX. Dispatch is coordinated from our Houston office, with crews serving Webster locally every day.
Serving Webster, TX - Our Local Coverage Area
We’re based in the Webster area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Webster
Most Webster neighborhoods, including Bay Colony and Lakeside, see a technician the same day you call or the next morning. Emergency calls for a gate stuck open are prioritized. Call (903) 417-0793 and a live person will give you a tracked arrival time, not a four-hour window.
For most repairs and opener swaps, no. If your Webster HOA requires matching hardware or finish approval for a full gate replacement, we’ll provide the specs and photos your board needs before we order anything. You’ll still get a written price first.
Always. We inspect the gate, explain what we found in plain language, and hand you a written price before any work starts. The invoice matches that price. No deposits, no surprise line items.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Webster Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.