Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Highland Village, TX
Gate repair in Highland Village, TX usually costs between $180 and $650 depending on whether it’s a welded hinge, a failed opener circuit board, or a bent track pulling the gate off-line. Most jobs we see in Highland Village are diagnosed and fixed same-day, with the written price agreed before any work starts. Highland Village gates get pushed hard by North Texas weather: summer heat bakes the control boards, spring storms soak the limit switches, and the clay soil shifts enough to throw gate posts out of alignment. Call Calder Gate Repair at (903) 417-0793 and a live person will answer, day or night.
Why Highland Village Homes Are Different
Highland Village sits along the south shore of Lewisville Lake, which means two things for gate hardware: humidity from the lake that accelerates corrosion on exposed steel, and sloping lots that put a gate’s weight at an angle instead of straight down. A gate that swings fine in January can bind by July when the heat expands metal and the ground dries out. We see a lot of welded steel gates from the 1990s and early 2000s across Highland Village, many of them original to the home, with hinges that have never been replaced and opener arms that have been fighting the same slope for two decades. Even gates that look fine from the street are often running on capacitors near end of life.
HOA expectations matter here. Highland Village neighborhoods with subdivision-managed entrances tend to require gates that close fully and quietly, which means a noisy operator or a gate that stops six inches short becomes a complaint fast. The work Calder does in Highland Village reflects that: quieter operator mounts, tighter closing tolerances, and limit switches set so the gate stops exactly where it should every time. Highland Village is not a city where you can put off a sagging gate until next season. The soil moves, the lake air corrodes, and a gate left binding will eventually tear the operator mount or snap a hinge weld.
Our Main Highland Village Services
Most Highland Village callers reach us about one of two things: a gate that won’t open, and an opener that runs but won’t move the gate. Each service has its own detailed Highland Village page below.
Gate Repair in Highland Village
This covers the physical gate itself: the steel or wood leaf, hinges, track, wheels, and the post it hangs from. In Highland Village, we mostly repair welded steel driveway gates and wrought-iron pedestrian gates on lakeside lots, where corrosion and soil movement do the most damage. A common Highland Village repair is a hinge weld that has cracked from years of the gate settling with the clay soil, or a gate leaf that drags on the low side of the driveway. We cut out the old weld, re-set the gate square, and re-weld before testing the full swing. Every repair carries the 365-Day Done Right Promise: if the same failure returns within a year, Calder returns at no charge. See Gate Repair in Highland Village for full pricing and the repair process.
Electric Gate Repair in Highland Village
Electric gate work is the electrical side: the power run, the motor, the safety sensors, and the control board. Highland Village homes with lakefront or hillside lots frequently have gates that are 80 to 150 feet from the house panel, so we’re often tracing buried cable runs that have nicked insulation or corroded splices. A very Highland Village problem is a photo eye that trips constantly in the low evening sun, or a control board that resets during summer thunderstorms. Calder techs are factory-familiar with FAAC, BFT, Linear, and Viking boards, so we diagnose the board rather than guessing. Read Electric Gate Repair in Highland Village for symptoms and prices.
Gate Opener Repair in Highland Village
The opener is the swing arm or slide motor bolted to the gate and post. In Highland Village, the most frequent opener failure is stripped gearing inside the arm, or a motor capacitor that burns out after years of North Texas heat. When the opener runs but the gate barely moves, it’s usually the gearbox. We replace the internal gear set and re-grease the unit, which brings most openers back to near-factory torque. For slide gates on longer drives, we check the chain tension and rail alignment, not just the motor. Details and brand-by-brand pricing are on Gate Opener Repair in Highland Village.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highland Village
Calder Gate Repair stocks repair parts for the openers Highland Village homes actually have: FAAC swing arms, BFT slide operators, and Linear control boards are the ones we keep on the van. Most common repairs are completed the same visit because the part is already there, not ordered. See our brands for the full list of what we service.
Pricing for Gate Company in Highland Village, TX
| Service | Typical range in Highland Village |
|---|---|
| Gate hinge replacement or weld repair | $180 – $450 |
| Gate track or wheel replacement | $220 – $500 |
| Gate post re-alignment | $250 – $600 |
| Electric gate diagnosis and repair | $150 – $400 |
| Gate opener motor repair or replacement | $250 – $650 |
| Control board repair or replacement | $200 – $550 |
| Safety sensor or photo eye replacement | $150 – $350 |
| Limit switch adjustment or replacement | $120 – $300 |
| Remote or keypad programming | $80 – $200 |
What pushes a Highland Village repair toward the top of these ranges is access: a lakeside gate that requires routing the power run down a slope, or a gate that needs to come off its posts for welding, takes longer and costs more than a simple hinge swap. Whatever the number is, you’ll see it in writing before we touch a bolt, and the invoice matches that number exactly.
Neighborhoods We Serve in Highland Village
Calder Gate Repair covers all of Highland Village, from the lakeside streets near Pilot Knoll Park to the subdivisions east of FM 2499. We’re typically able to reach most Highland Village homes within about an hour of your call.
- The Hills of Highland Village
- Castlewood
- Highland Shores
- Lakeside Highlands
- Village Estates
Service Area – Cities Near Highland Village
Highland Village is part of the broader Dallas-Fort Worth metro, and our dispatch covers the surrounding area as well. If you’re in Dallas, TX or Fort Worth, TX, we can route a local technician to you. We also serve Houston, TX and San Antonio, FL through our other area crews.
Serving Highland Village, TX - Our Local Coverage Area
We’re based in the Highland Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland Village
Most Highland Village calls are reached within about an hour from the time you phone (903) 417-0793. You’ll get a live arrival time you can track on your phone, not a four-hour window. Emergency gate-down calls are prioritized.
For most repairs on your own driveway or pedestrian gate, no approval is needed. If your gate is part of a shared subdivision entrance, the HOA usually wants the work done quickly and quietly. We can provide a written quote for HOA review if that helps move things along.
Both. We take same-day emergency calls around the clock, and we also book scheduled visits for Highland Village homeowners who want a weekday morning or a specific time slot. Every visit includes the written price before work begins and the 365-Day Done Right Promise.
Call Calder Gate Repair at (903) 417-0793 for a free estimate on any gate repair in Highland Village. A live person answers, the price is in writing before work starts, and the repair carries a full-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Village Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.