Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Kirby, TX
Gate repair in Kirby, TX comes down to two things: the age of the gate opener itself and the local soil. Kirby sits on expanding clay that shifts with every wet-dry cycle, which slowly pulls gate posts out of square. Calder Gate Repair is the dedicated gate company serving Kirby homeowners, and we stock parts for the openers most common in this part of Bexar County. When a gate stops closing all the way or starts scraping the driveway, call (903) 417-0793 and a live person answers, day or night.
Why Kirby Homes Are Different
Kirby is a compact city with a lot of homes built in the 1960s through 1980s. Many of those properties have driveway gates that were added years after the house, which means the original opener wiring often runs through conduit that has since settled underground. We see more corroded wire splices and failed transformer connections in Kirby than in newer subdivisions.
The soil here is a real factor. When it is dry, the ground contracts and the gate posts lean outward just enough to misalign the photo eyes. When it rains hard, the ground swells and the gate can bind at the latch. Neither issue is a mystery to fix, but both are easier when the technician knows the local pattern. We also encounter a fair number of gate openers that were installed without a dedicated circuit, sharing a breaker with garage or exterior lighting. It works until it does not, and then the gate trips the breaker at the worst possible time.
Kirby has older neighborhoods around Ackerman Road and newer homes east toward I-10. The older sections often have gates with steel posts set directly in concrete, while the newer sections use bolt-down posts on slabs. The repair approach differs, and so does the estimate. We are not guessing from a call center. We are looking at the post, the hinges, the opener arm, and the limits before we hand you a written price.
Our Main Kirby Services
Kirby homeowners typically call us for two things: a gate that will not open or close on command, and an opener that runs but does not move the gate. We isolate the problem fast, because the difference between a broken hinge and a failed control board is the difference between a one-hour job and a parts order. Here is how we handle each in Kirby.
Gate Repair in Kirby
This is the physical gate itself: hinges, rollers, posts, steel sag, alignment, latch hardware. In Kirby we regularly see gate posts that have shifted on the clay soil, leaving a gap at the top latch or dragging the gate across the concrete. We weld, shim, re-set, and align. If a weld fails or the gate binds again within a year, our 365-Day Done Right Promise covers the second visit. Learn more about Gate Repair in Kirby.
Electric Gate Repair in Kirby
Electric issues on a Kirby gate usually start with power, not programming. A breaker trips, a wire splice corrodes underground, or a transformer burns out after a summer of heat and a winter of rain on the same run of conduit. We trace the circuit, identify the dead component, and repair or replace it. Every job gets a written price before we touch a tool. See what is involved with Electric Gate Repair in Kirby.
Gate Opener Repair in Kirby
The opener is the motor and control unit that drives the gate. In Kirby, the most common opener failures are worn drive gears, failed limit switches, and control boards killed by power surges. We are factory-familiar with Linear, Viking, Ghost Controls, and DoorKing units, so we bring the right parts on the first trip. The booking is simple: live person, real arrival time, written quote. Details are on the Gate Opener Repair in Kirby page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
Calder Gate Repair is factory-trained on nine major opener brands, but the ones we see most often in Kirby driveways are Linear, Viking, Ghost Controls, and DoorKing. We stock common boards, gears, and remotes for these locally, so most opener repairs happen in one visit. Our brands page lists everything we service.
Pricing for Gate Company in Kirby, TX
These are the figures we quote most often for Kirby work. Every price is given in writing before the job starts, and the invoice matches the quote.
| Service | Typical range in Kirby |
|---|---|
| Service call and on-site assessment | $49 – $99, credited toward repair |
| Gate opener motor replacement | $450 – $1,200 |
| Control board replacement | $350 – $900 |
| Gear and sprocket replacement | $200 – $500 |
| Limit switch replacement | $150 – $350 |
| Safety sensor alignment or replacement | $125 – $300 |
| Dual leaf gate diagnosis | $250 – $550 |
| Hinge and wheel replacement | $300 – $800 |
| Full gate opener installation | $1,800 – $4,500 |
| Post re-setting or concrete work | $400 – $1,300 |
| Underground wiring repair | $250 – $800 |
In Kirby, the two things that push a price up are clay-soil post movement and underground wiring runs that have corroded over decades. Both take more labor than the part itself. You will never see a number change after we quote it. That is the deal at Calder Gate Repair.
Neighborhoods We Serve in Kirby
We work all over Kirby, from the older streets near Ackerman Road to homes along Binz-Engleman and the newer construction closer to I-10. Our average response time to Kirby callers is under 90 minutes for emergency gate issues.
- Ackerman Road corridor
- Binz-Engleman area
- Old Kirby residential district
- East Kirby near I-10
- Kirby city center
Service Area – Cities Near Kirby
While this page focuses on Kirby, our crews frequently serve nearby areas when a gate is stuck open and a vehicle is trapped inside. We also cover Houston, TX, San Antonio, FL, Dallas, TX, and Fort Worth, TX. If you are outside Kirby, call (903) 417-0793 and we will confirm coverage immediately.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Kirby
Our nearest technician usually reaches Kirby addresses in under 90 minutes for emergencies. Every dispatch includes a live arrival time you can track, not a four-hour window.
Most repairs and opener replacements in Kirby need no permit. Full new installations may need HOA review if your neighborhood has covenants. We can tell you what applies to your street before you spend anything.
Yes. Most non-emergency Kirby jobs land on the calendar within 24 to 48 hours. Call (903) 417-0793, and the person who answers can book you immediately.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.