Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Krum, TX
We’re Calder Gate Repair, and we fix gates across Krum, TX. Our crews work on gate opener failures, welded frames that have shifted, and control boards fried by North Texas storms. Most Krum gate repairs run $180 to $340 for the service call and labor, plus parts if your opener needs something specific. Call (903) 417-0793 and we’ll walk you through what we think is wrong before we even schedule the truck.
Why Krum Homes Are Different
Krum sits on the western edge of Denton County, where homes tend to sit on larger lots than you’d find closer to the Metroplex. That means longer gate tracks, heavier swing arms, wider driveway approaches, and more running feet of chain or rack. A gate in Krum usually gets more open-close cycles per day than one in a tighter subdivision, simply because every trip out means the gate opens twice.
The soil here also plays a role. Krum’s clay-heavy ground swells and shrinks with the rains, and over a few seasons that movement can shift a gate post just enough to knock the opener’s alignment out of spec. We see a lot of openers in Krum that test fine electrically but fail mechanically because the gate itself has moved half an inch out of square. You’ll feel it as a gate that shudders at the halfway point or an opener that trips its limit early.
Storm season matters too. When a Derecho or a strong spring front rolls through Krum, the first things to fail are the operator capacitors and the photo-eye sensors. Lightning doesn’t need a direct hit; a nearby strike on the same transformer can spike a control board. We stock replacement boards and sensors for the common brands on the truck, so most storm-related calls are one visit, not two.
Our Main Krum Services
The two calls we run most in Krum are mechanical gate failures – a gate that won’t budge or a wheel that’s popped the track – and electric gate openers that have stopped responding entirely. Each has its own dedicated Krum page below, because the pricing, parts, and repair timelines really are different.
Gate Repair in Krum
A gate that drags on the wheel path, swings past its stop, or won’t latch is usually a mechanical problem, and in Krum it’s often tied to post movement or a worn hinge on a heavier custom steel gate. We repair the gate itself: tracks, rollers, hinges, latches, and posts that need re-setting. If a gate is jammed half open, that’s a security problem and we treat it as one – a live person answers 24/7 and we’ll get a crew out the same day when the gate won’t secure. You can read what a full mechanical repair covers on our Gate Repair in Krum page.
Electric Gate Repair in Krum
When the opener hums but the gate doesn’t move, or the gate jumps instead of gliding, the problem is usually in the electrical side: a capacitor, a limit switch – the small sensor that tells the gate when to stop – or a corroded connection inside the operator box. Krum’s humidity and hot summers cook electrical components faster than milder climates, so we see swollen capacitors and heat-cracked solder joints all summer long. We diagnose the circuit before we replace anything, and every repair gets a written guarantee. Details are on our Electric Gate Repair in Krum page.
Gate Opener Repair in Krum
If your opener is completely dead – no hum, no indicator light, nothing – or the gate starts and stops in random spots, the opener itself needs attention. Krum homeowners run mostly LiftMaster, FAAC, and Linear openers around here, and our techs are factory-familiar with all of them. We test the board, the capacitor, the receiver, and the motor, then give you a written price before touching a screw. We don’t sell a new opener when a $60 part fixes the problem. See the full breakdown on our Gate Opener Repair in Krum page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Krum
Krum’s gate openers span every era. We service FAAC hydraulic operators, BFT slide-gate systems, Linear residential openers, and Viking swing arms, carrying common boards, capacitors, and photo-eyes on the truck. Most mechanical repairs on these brands are same-day. See the full our brands list for everything we cover.
Pricing for Gate Company in Krum, TX
Here’s what Krum homeowners can expect to pay for common gate jobs. These ranges are written up front, agreed to before any work starts, and never changed at the door.
| Service | Typical range in Krum |
|---|---|
| Basic gate alignment or track reset | $180 – $340 |
| Gate opener repair (labor only; parts separate) | $225 – $450 |
| Electric gate diagnosis (applied to repair if approved) | $130 – $210 |
| Gate hinge or weld repair | $240 – $480 |
| Gate opener replacement (labor only; opener separate) | $350 – $750 |
| Gate wheel or roller replacement | $160 – $290 |
| Gate operator capacitor or limit switch replacement | $180 – $320 |
| Photo-eye sensor replacement | $210 – $360 |
| Control board repair or reprogramming | $260 – $480 |
| Full gate system tune-up and safety check | $195 – $350 |
What pushes Krum prices toward the high end is accessibility: heavier custom steel gates, longer tracks, and posts that have shifted and need re-setting. Every quote is written and finalized before we touch the gate, so the invoice you pay is the number you already saw.
Neighborhoods We Serve in Krum
We cover all of Krum and the unincorporated roads around it. Our technicians run routes that put them in most Krum neighborhoods within about an hour of a call, including:
- Downtown Krum
- The Meadows of Krum
- Primrose Estates
- Hunter’s Creek
- Areas near Krum High School and the I-35 corridor
If you’re on the edge of Krum’s service boundary, call and we’ll confirm a live arrival time before the truck leaves the shop.
Service Area – Cities Near Krum
If you’re just outside Krum, we’ve got dedicated pages for the towns around you. See our coverage in Sanger, TX, Denton, TX, Argyle, TX, and Aubrey, TX. Each one breaks down local pricing and response times for that specific area.
Serving Krum, TX - Our Local Coverage Area
We’re based in the Krum area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Krum
Most Krum calls are reached within about an hour. Our dispatch is coordinated from the Dallas-Fort Worth office, with crews routed locally through Krum during the week. For a gate that won’t close or won’t secure, call (903) 417-0793 and a live person will confirm a trackable arrival time, not a four-hour window.
Most repairs – openers, sensors, tracks, hinges – don’t need a permit. If a HOA covers your Krum neighborhood, the HOA may have its own gate standards, and we can tell you what to check before the work happens. We’ll handle the mechanical side; you just clear any architectural requirements on your end.
We can often schedule for early morning or late afternoon, and we’ll give you a live arrival time you can watch. You don’t need to sit home all day – our techs text when they’re about 30 minutes out, and you can pay the digital invoice from a link once the job is finished.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Krum Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.