Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in La Porte, TX
When a gate stops opening in La Porte, you usually find out at the worst possible time: backing out for the morning shift at the plants, or coming home late off Highway 146. Calder Gate Repair handles swing and slide gate failures across La Porte, and most jobs are done the same day we hear from you. What makes La Porte work different is the combination of salty Gulf air, older driveways poured decades ago, and gates that see a lot more use than the average Houston suburb. Call (903) 417-0793 and a real person answers, day or night.
Why La Porte Homes Are Different
La Porte sits right on Galveston Bay, and that coastal air is rough on gate hardware. We regularly see rusted hinge plates, corroded limit switches, and opener boards with salt creep inside the housing when we work homes in Bayridge, Fairmont Park, and along Spencer Highway. Moisture gets into control boxes even when they are sealed, and the constant wind off the water works gates harder than they were designed for. A gate that fights the wind every time it opens wears out bushings and brackets faster.
The housing stock in La Porte ranges from 1970s ranches to newer builds in the neighborhoods south of Fairmont Parkway, and many of those older properties have gates that were installed with whatever opener was on sale at the time. That means we open panels to find FAAC motors next to off-brand boards, or a Viking arm bolted to a gate post that was never quite plumb. None of that is the homeowner’s fault, but it does mean generic repair advice does not apply here. La Porte jobs need a tech who knows how to diagnose what is actually in the ground, not what the manual says should be there.
Our Main La Porte Services
Most La Porte homeowners reach out for one of two reasons: the gate has stopped moving entirely, or it moves but won’t stop in the right place. We handle both, plus full opener replacement, across every neighborhood in the city.
Gate Repair in La Porte
A gate that drags on a La Porte driveway or bangs shut against a rusted post is a repair job, and the fix usually starts with finding the actual failure point: a bent hinge, a cracked weld, a wheel that no longer rolls. Our techs carry replacement hinges, wheels, and bracket stock on the truck so the most common Gate Repair in La Porte jobs wrap up in one visit. On older gates near the bay, we always check the post bases for hidden rot or corrosion before we put a new opener on, because no motor fixes a gate that is sinking.
Electric Gate Repair in La Porte
When a gate opens but then reverses, or buzzes and does nothing, the control side is failing. Electric Gate Repair in La Porte means testing the board, the photo eyes, the limit switch (the small sensor that tells the gate when to stop), and the wiring between them. Humidity off Galveston Bay accelerates electrical faults, especially in enclosures that have been caulked but not truly sealed. We diagnose the faulty component, replace only what is broken, and write the price down before anything gets taken apart.
Gate Opener Repair in La Porte
The opener is the motor and gearbox that actually moves the gate, and opener failures are what we see most on double swing gates and long slide gates along the creek-side streets. Gate Opener Repair in La Porte covers stripped gears, dead capacitors, and failed control boards on every major brand. If your opener is over 12 years old and the board has gone, we will tell you honestly whether repair or replacement makes more sense, with both numbers in writing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in La Porte
We work on FAAC, BFT, Linear, and Viking openers every week in La Porte, and we keep common gears, capacitors, and remote receivers for those brands stocked on the truck. Most repairs go faster because we’re not waiting on a part to ship. See our brands for the full list.
Pricing for Gate Company in La Porte, TX
| Service | Typical Range in La Porte |
|---|---|
| Gate opener repair | $120 – $360 before parts |
| Electric gate diagnostic | $89 – $149 |
| Limit switch replacement | $90 – $180 |
| Remote or receiver programming | $60 – $110 |
| Hinge or weld repair | $110 – $260 |
| Gate opener installation | $450 – $1,100 depending on brand and gate type |
| Full gate opener replacement | $600 – $1,300 depending on brand and gate type |
| Gate off-track or sagging | $110 – $280 |
What pushes pricing up in La Porte is usually corrosion: a post that needs re-setting, wiring that has to be pulled and replaced, or an enclosure so rusted it has to be swapped. Whatever the number is, you get it in writing before we start, and the invoice at the end matches what was agreed at the door.
Neighborhoods We Serve in La Porte
We cover every part of La Porte, from the older streets near Main and Broadway to the subdivisions off Fairmont Parkway and the acreage properties out toward Spencer and Underwood. Our typical response window for a La Porte service call is under 90 minutes, and emergency calls come in through the live line 24/7.
- Fairmont Park
- Bayridge
- East La Porte
- Bayside Terrace
- Shoreacres (north side)
Service Area – Cities Near La Porte
While this page is focused on La Porte, our Houston-based dispatch covers the surrounding communities as well. We regularly run calls in Deer Park, TX, Baytown, TX, Seabrook, TX, and Channelview, TX. If your gate is in one of those cities, the same pricing and the same written guarantee apply.
Serving La Porte, TX - Our Local Coverage Area
We’re based in the La Porte area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in La Porte
Most La Porte calls are reached in under 90 minutes from the time you call (903) 417-0793. Emergency calls, like a gate stuck open with a dog inside, get priority. A live person handles every call, 24 hours a day, and gives you a real arrival time you can track.
For a repair on an existing gate, no permit is needed in La Porte. If a full replacement or a longer gate is part of the job, some HOAs around Fairmont Park and Bayside Terrace have architectural review rules. We will flag that if it applies before any work starts.
No. Same-day dispatch is standard for La Porte when you call before mid-afternoon, and there is no rush fee. The price you are quoted and written down before the work begins is the price on the invoice, regardless of how fast we get there.
Contact Calder Gate Repair in La Porte
If your gate is stuck, sagging, or refusing to close, call Calder Gate Repair at (903) 417-0793. We will tell you what is wrong, what it costs, and when we will be there, before anything is taken apart. Nico Alvarez and the La Porte crew carry the most common FAAC, BFT, Linear, and Viking parts on the truck, and every repair carries the 365-Day Done Right Promise: if it fails within a year, we come back at no charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What La Porte Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.