Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Mission Bend, TX
Calder Gate Repair is the gate company Mission Bend homeowners call when a gate won’t open, won’t close, or starts making sounds it shouldn’t. Most repairs here run $185 – $390 before specialty parts, and we quote the full price in writing before any work starts. Mission Bend’s mix of ranch homes and newer builds on clay-heavy soil means gates shift and settle differently than they do elsewhere in the Houston area – that’s the kind of thing our techs plan for on every visit. Call (903) 417-0793 and a live person answers, day or night.
Why Mission Bend Homes Are Different
Mission Bend sits on the kind of expansive clay soil that moves with every wet-dry cycle, and that movement shows up at the gate line. Posts lean a few degrees over two or three summers. Catch plates that lined up in March bind by August. Gates that worked perfectly for five years suddenly drag against the drive. We see it most often in the older sections north of Bellaire Boulevard and along the routes toward Alief, where homes were built before modern steel-post footings became standard.
The housing stock here also mixes eras. A 1970s single-swing tubular steel gate has different hinge wear patterns than a 2010s ornamental iron gate with an automated opener. The clay soil underneath doesn’t care how nice the gate looks – both settle on the same ground. Houston’s humidity adds another layer: capacitor failure in opener circuit boards happens faster in coastal heat, and Mission Bend’s mosquitoes want a gate that closes all the way, not one that hangs two inches short of the post. These are small things until they strand you outside your own driveway at 6:30 a.m.
Our Main Mission Bend Services
Most calls we get from Mission Bend fall into three buckets, and each has its own page on our site with full detail and pricing.
Gate Repair in Mission Bend
This is the catch-all for gates that are physically broken – sagging, dragging, latched shut, or leaning off the hinges. In Mission Bend, the usual culprits are clay-soil post shift, worn hinge pins, and rusted-through frame tubing on older installations. We bring the gate back to square, replace what’s failed, and adjust the closer or lock so it catches cleanly. Gate Repair in Mission Bend has the full service breakdown and price ranges.
Electric Gate Repair in Mission Bend
Electric gate repair covers the systems that move the gate without you pushing it – the motor, the control board, the photo eyes, the keypad, and the loop detectors. Mission Bend’s humidity is hard on circuit boards and limit switches (the small sensors that tell the gate when to stop). When an electric gate fails, it often fails closed, which is less a repair problem and more a jailbreak-avoidance problem. Electric Gate Repair in Mission Bend covers every component and what repairs typically cost.
Gate Opener Repair in Mission Bend
The opener is the part most people call “the motor box,” and it fails in predictable ways: stripped gears, burned capacitors, broken drive belts, and fried control boards after lightning. Mission Bend gets the same afternoon thunderstorms as the rest of west Houston, and a nearby strike sometimes leaves gates dead even when the house power comes back clean. Gate Opener Repair in Mission Bend walks through diagnosis and what replacement costs look like installed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mission Bend
Our techs work daily on Linear, Viking, Ghost Controls, and DoorKing openers – along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Common parts for these brands are stocked in our Houston metro vans, which means most Mission Bend repairs don’t wait on shipping. See our brands page for the full list.
Pricing for Gate Company in Mission Bend, TX
| Service | Typical range in Mission Bend |
|---|---|
| Gate repair, diagnostic and minor adjustment | $85 – $185 |
| Gate opener repair (labor only, no parts) | $120 – $240 |
| Electric gate repair, basic electrical component | $140 – $260 |
| Gate hinge replacement (single gate, standard) | $150 – $300 |
| Gate post reset or reinforcement | $200 – $420 |
| Limit switch replacement | $130 – $190 |
| Control board replacement | $200 – $380 |
| Gate opener gear or drive replacement | $210 – $410 |
| Full gate opener motor replacement (unit only) | $300 – $650 |
| Photo eye or safety sensor replacement | $120 – $220 |
| Keypad or remote programming and setup | $75 – $150 |
What pushes a Mission Bend job to the higher end of these ranges is usually post movement – if the gate has shifted enough that we’re resetting hardware and re-aligning the entire leaf, that’s additional labor. The good news: the price we quote before work is the price you pay, with no surprise line items on the invoice.
Neighborhoods We Serve in Mission Bend
We cover all of Mission Bend, from the established streets west of Highway 6 to the neighborhoods backing up toward Alief. Typical response for a scheduled visit is same-day or next-day depending on the time you call.
- Mission Bend proper (77433 and 77083 ZIP areas)
- Mission West
- Green Trails
- Barker Point area
- Meadow Ridge streets north of Bissonnet
Service Area – Cities Near Mission Bend
Mission Bend sits at a crossroads of the greater Houston metro, and we regularly cross into nearby municipalities for gate work. If you’re in Houston, TX, San Antonio, FL, Dallas, TX, or Fort Worth, TX, give us a call and we’ll confirm coverage for your neighborhood. Dispatch is coordinated from our Houston metro office, with crews serving Mission Bend directly.
Serving Mission Bend, TX - Our Local Coverage Area
We’re based in the Mission Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mission Bend
Most Mission Bend calls are scheduled same-day or next-day. If a gate is stuck closed and blocking your car in, tell the dispatcher when you call – emergency calls get prioritized, and a live person answers 24/7 at (903) 417-0793.
Most Mission Bend HOAs only require approval for full gate replacement that changes the look or footprint, not for repairs. If your community has a specific rule, we’ll work with whatever documentation the board needs – the repair itself doesn’t wait on paperwork.
Every repair carries our 365-Day Done Right Promise: if the same repair fails within 365 days, we return and fix it at no charge. It’s stated in writing on every job, not buried in fine print. Call (903) 417-0793 for a free estimate for your Mission Bend home.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Bend Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.