Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Richland Hills, TX
Gate repair in Richland Hills, TX usually means one of three things: a gate that won’t open, a gate that opens but won’t stop in the right place, or an opener that’s making noise but not moving the gate. We’re Calder Gate Repair, part of the Relay Home Co. family since 2009, and we handle all three. Most Richland Hills gate jobs run $180 to $520 before parts, and we put that number in writing before any work starts. If your gate is stuck, call (903) 417-0793 and a live person answers, day or night.
Why Richland Hills Homes Are Different
Richland Hills is a compact, older Tarrant County city where many homes date to the 1950s and 1960s. That matters for gate work. The original driveways were built for single cars, which means many gates here are narrower than what you’d find in newer suburbs to the north. Narrow gates mean more stress on hinges and more strain on the opener when a full-size pickup or SUV squeezes through. We see bent hinge posts and burned-out opener motors on Richland Hills properties more than almost anywhere else in the metro.
The soil here also plays a role. Richland Hills sits on clay-heavy ground that swells after rain and shrinks during dry spells. Gate posts set in that soil shift over time, pulling the gate out of alignment. A gate that drags on the ground in March may swing fine by August, then drag again after the first fall rain. That movement shortens the life of wheels, hinges, and the opener’s limit switch, which is the small sensor that tells the gate where to stop. When we repair a gate in Richland Hills, we check the post alignment first. Fixing the opener without addressing a shifting post just means another call in six months.
Richland Hills also has its own municipal rules about fences and gates along property lines. Setback requirements and height limits are enforced, and some neighborhoods have deed restrictions that affect what your gate can look like or how tall it can be. Before you replace or significantly alter a gate, check with the city’s building department. We’re happy to help you figure out what applies to your street.
Our Main Richland Hills Services
The two calls we get most from Richland Hills homeowners are for dead openers and gates that have come off their tracks or sagged past the latch. Here’s what those jobs look like in this city.
Gate Repair in Richland Hills
Most Richland Hills gate repairs involve physical damage: sagging hinges, a bent post from the shifting clay soil, a wheel that’s worn flat, or a weld that’s finally given up after years of Texas heat. We come out, assess the full gate assembly, and give you a written price before any work begins. If your gate is dragging across the driveway on Glenview Drive or scraping the concrete near Richland Plaza, that’s the kind of job we handle the same day. Gate Repair in Richland Hills covers the details, including what we stock on the truck and how the 365-Day Done Right Promise works.
Electric Gate Repair in Richland Hills
When an electric gate stops responding, it’s usually electrical: a limit switch that’s failed, a control board that’s fried after a storm, or wiring that’s been chewed by the squirrels that love older Richland Hills trees. Electric gate work involves live voltage and sometimes high-tension components. That’s not a DIY job. We trace the circuit, identify the failed part, and replace it with a brand-matched component. See Electric Gate Repair in Richland Hills for what a typical diagnosis looks like and how long most repairs take.
Gate Opener Repair in Richland Hills
Gate opener repair is its own specialty. The opener is the motor and control unit that moves the gate, and Richland Hills sees a lot of opener failures because the gates they’re moving are older and heavier than the openers were ever rated for. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we know which opener models hold up best on a narrow 1960s driveway. Details are on the Gate Opener Repair in Richland Hills page, including cost ranges for common opener faults.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Richland Hills
Our technicians train specifically on the opener brands Richland Hills homeowners actually have installed. We service FAAC and BFT hydraulic openers, Linear and Viking control boards, and carry common parts for all of them on the truck. That means most Richland Hills repairs are done in one visit instead of waiting on a shipped part. See our brands for the full list.
Pricing for Gate Company in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Gate opener diagnostic | $75 – $150 |
| Limit switch replacement | $140 – $220 |
| Control board replacement | $220 – $420 |
| Gate hinge replacement (pair) | $160 – $280 |
| Gate wheel replacement | $90 – $180 |
| Post re-alignment (minor) | $180 – $340 |
| Photo-eye sensor replacement | $110 – $220 |
| Chain or belt replacement | $150 – $300 |
| Full opener swap (standard) | $450 – $850 |
| Welding repair (per joint) | $100 – $250 |
What pushes a Richland Hills gate repair toward the top of these ranges is usually access and age. A post set in swelling clay needs more work to stabilize than one in sandy soil, and a 1960s gate that’s had decades of patch repairs often hides problems you only find once it’s apart. Whatever we find, the price you agree to before we start is the price on the invoice. If we discover something else mid-job, we stop and talk to you first.
Neighborhoods We Serve in Richland Hills
We run calls all over Richland Hills, from the older streets near Baker Boulevard to the quieter residential blocks around the Richland Hills Park area and the neighborhoods east of Rufe Snow Drive. We’re usually on-site within 60 to 90 minutes for emergency calls and same-day for most non-emergency repairs.
- Richland Hills Park area
- Neighborhoods off Baker Boulevard
- East of Rufe Snow Drive
- Near Richland Plaza
- Glenview Drive corridor
Service Area – Cities Near Richland Hills
Our Richland Hills crews also cover neighboring cities across the metro. Dispatch is coordinated from our Dallas-Fort Worth office, with technicians routed locally. If you’re in Fort Worth, TX, Dallas, TX, Houston, TX, or San Antonio, FL, give us a call and we’ll get you scheduled with the right team.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Richland Hills
It depends on the scope. Simple repair work, like replacing an opener or fixing a hinge, doesn’t need a permit. Replacing the entire gate structure or moving a post may require city approval, especially if it’s along a property line or visible from the street. Call (903) 417-0793 and we’ll tell you what we’ve seen pass inspection on similar Richland Hills streets.
For a stuck-open or stuck-closed gate, we typically arrive within 60 to 90 minutes anywhere in Richland Hills. Our technicians are dispatched with a live arrival time you can track. Call (903) 417-0793 and a live person will book it right away, day or night.
Many Richland Hills neighborhoods have deed restrictions that limit gate height, material, or color. We can work within those rules. Before any replacement, we’ll ask about your HOA requirements and make sure the plan fits. The price is written before we start, so there are no surprises either way.
If your Richland Hills gate is acting up, call Calder Gate Repair at (903) 417-0793. You’ll get a straight answer, a real arrival time, and a written price before we touch a single bolt.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.