Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Sunrise, FL
Gate repair in Sunrise, FL usually means one of three things: a gate that won’t open, a gate that won’t stay closed, or an opener that quit responding to the remote. Most repairs run between $140 and $500 depending on whether we’re talking a bent track, a failed limit switch, or a full opener swap. Sunrise has a particular mix of older slider gates in neighborhoods like Welleby and newer swing gates in the western communities, and each ages differently in our heat and humidity. Calder Gate Repair handles both, with a written price before any work starts. Call (903) 417-0793 and a live person answers, any hour.
Why Sunrise Homes Are Different
Sunrise sits just west of Fort Lauderdale, far enough inland that the salt air isn’t the main enemy, but close enough that humidity and afternoon thunderstorms still do real damage to gate electronics over time. We see more corroded limit switches and control boards in Sunrise than we do in drier parts of Florida. The housing stock matters too. Older communities like Welleby and Springtree have plenty of aluminum slider gates from the 1980s and 90s, many running original Linear and older Viking openers. Newer developments in the western reaches of Sunrise, out toward Sawgrass Mills and the Weston line, tend toward swing gates with FAAC and BFT hydraulic operators. Both styles fail differently, and nobody should be diagnosing them over the phone without seeing the hinges, the track, and the condition of the wiring.
There’s also the HOA layer. A large share of Sunrise homes sit in communities with gates at the entrance, and when the entry gate goes down, the property management company gets involved fast. That changes the timeline. We’re used to working with Sunrise HOAs, getting the gate moving again the same day and providing written paperwork they can file. For single-family driveway gates, it’s usually a faster, simpler call. Either way, the heat is the constant: direct midday sun on a black control box can push internal temperatures past 120 degrees, which shortens the life of capacitors and microswitches faster than most manufacturers expect.
Our Main Sunrise Services
Most calls we get in Sunrise land in one of three buckets: a mechanical problem with the gate itself, an electrical fault somewhere between the panel and the motor, or an opener that needs repair or replacement. Each has its own Sunrise page with pricing and specifics.
Gate Repair in Sunrise
Gate repair covers the physical side: bent tracks, sagging hinges, misaligned posts, wheels that have gone flat, chains that have stretched, and gates that drag on the driveway because the concrete heaved. In Sunrise, we routinely adjust gates that have shifted after heavy summer rain softened the soil around the posts. A gate that scrapes today will snap a hinge bolt next month. Our techs rebuild track sections, weld or replace brackets, and true up posts so the gate rolls or swings cleanly. Written price first, every time. Full details are on the Gate Repair in Sunrise page.
Electric Gate Repair in Sunrise
Electric gate repair means tracing the actual electrical fault: a dead outlet, a tripped GFCI, a chewed low-voltage wire, a failed photocell, or a control board that’s no longer sending power to the motor. Lightning strikes and power surges in Sunrise’s summer storms are a common culprit, and so are rodents in the control box. We diagnose the circuit, replace failed components, and verify everything with a multimeter before we call the job done. It’s the one service where “it’s probably the board” is very often wrong, so we test rather than guess. See the Electric Gate Repair in Sunrise page for typical costs.
Gate Opener Repair in Sunrise
Gate opener repair focuses on the operator itself: the motor, the limit switches that tell the gate when to stop, the remote receiver, the keypad, and the arm that connects the opener to the gate. Sunrise homeowners call most often about openers that run but don’t move the gate, remotes that only work from ten feet away, or keypads that stopped accepting codes after a rain. We service and repair FAAC, BFT, Linear, and Viking units among others, and when the opener isn’t worth saving, we quote a replacement with a written price before ordering anything. That page is Gate Opener Repair in Sunrise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Sunrise
Calder Gate Repair is factory-familiar with the openers we see across Sunrise, including FAAC, BFT, Linear, and Viking. We stock common replacement parts for these units and can usually complete opener repairs without waiting on a parts shipment. See our brands for the full list we train on. If your opener is one we know well, same-day repair is often possible because the part is already on the truck.
Pricing for Gate Company in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair (diagnostic + minor electrical fixes) | $150 – $400 |
| Gate track rebuild or major mechanical repair | $350 – $750 |
| Control board replacement | $220 – $600 |
| Limit switch replacement | $140 – $260 |
| Remote or keypad repair / reprogramming | $90 – $200 |
| Opener swap (existing operator replacement) | $450 – $1,200 |
| Full gate operator installation (new setup) | $1,500 – $4,000 |
Sunrise pricing runs a little higher than the national average because of what the climate does to outdoor electronics: corrosion inside control boxes, sun-damaged capacitor banks, and blown boards from summer lightning. Before any work begins, we put the full price in writing at your door; the number on the invoice is the number you agreed to, nothing added.
Neighborhoods We Serve in Sunrise
We work across all of Sunrise, from the established communities east of University Drive to the newer developments near the Sawgrass Expressway. Each area has its own rhythm, but our dispatch is citywide.
- Welleby
- Springtree
- Sunrise Golf Village
- The Islands
- West Sunrise, including homes near Sawgrass Mills
Typical response for most Sunrise calls is within 90 minutes for gate repairs, with earlier arrival common on weekday mornings and later in the day after storms roll through.
Service Area – Cities Near Sunrise
Calder Gate Repair is based out of the Miami metro office and serves Sunrise directly with local crews. We also cover the wider South Florida market, including Miami, FL and Jacksonville, FL to the north, plus Tampa, FL and Orlando, FL for jobs that fall outside the immediate Sunrise footprint. If you’re on the edge of Sunrise, call and we’ll confirm coverage right away.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sunrise
Most Sunrise homes are within 90 minutes of a dispatched tech, and often faster on weekday mornings. Same-day service is common for repair calls, though opener installations and full automation work are scheduled ahead with a free measure and written quote. Call (903) 417-0793 and we’ll give you a live arrival window you can track.
For single-family driveway gates, most repairs don’t require a permit, but some Sunrise HOAs require approval for visible changes like a new gate or opener. We provide the written documentation most property managers request. For community entry gates, the HOA or property management team typically handles approval before we schedule.
A tech arrives, diagnoses the problem, and writes you a firm price before turning a single bolt. That price covers labor for the repair, and we quote any replacement parts on the same written sheet. If the repair fails within 365 days, Calder returns at no charge under the 365-Day Done Right Promise. The invoice you pay matches the price you approved, every time.
If your gate isn’t working right in Sunrise, call Calder Gate Repair at (903) 417-0793. A live person answers, we quote a written price before any work starts, and we back the repair for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.