Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Burleson, TX
If your gate in Burleson won’t open, sags on its hinges, or the opener motor just hums without moving, you need a gate company that treats the job like a repair, not a sales call. Calder Gate Repair handles gate repair, electric gate repair, and gate opener work across Burleson, Texas, from the established subdivisions along Alsbury Boulevard to acreage properties on the edges of town. Most jobs get a same-day or next-day dispatch, a written price before any work starts, and a real person on the phone at (903) 417-0793 whenever you call.
Why Burleson Homes Are Different
Burleson’s gate repair jobs split into two fairly distinct halves. The first is the classic suburban lot: driveways off John Jones Drive, Renfro Street, and the neighborhoods around Burleson High School, where gates are usually decorative steel or aluminum on posts set into North Texas clay. That clay is the whole story. It expands when wet and shrinks in the summer heat, which slowly works gate posts out of plumb. A gate that scraped the ground in February may bind at the latch by August, and the opener struggles harder every week.
The second half is acreage and semi-rural properties south and east of town, toward the Johnson County line, where you’re more likely to see a sliding or cantilever gate on a concrete track. Out there, wind is the bigger force: prevailing gusts push against a full-length gate panel, and everything from the hinges to the limit switch takes more abuse than in a sheltered subdivision. Burleson also sits close enough to the DFW sprawl that afternoon storms roll through fast, which means outdoor electronics need properly sealed connections and operators that can handle brief power interruptions without losing their travel settings.
Our Main Burleson Services
Most Burleson calls to Calder Gate Repair start with one of three problems: a gate that won’t move at all, an opener that moves the gate but then won’t stop or reverse properly, or an electric system that tripped a breaker and won’t come back online. Each has a dedicated page with full pricing and timelines.
Gate Repair in Burleson
A heavy steel gate that’s out of alignment puts real strain on the opener every single cycle. In Burleson, the most common structural fixes are sagging hinges, bent or rusted posts, worn rollers on sliding gates, and latch assemblies that no longer catch. Calder Gate Repair corrects the mechanical problem first, then runs the full cycle to make sure the opener isn’t fighting what’s left. If the issue is purely mechanical, the repair often takes under an hour once the crew arrives. Full details, including what gets inspected, live here: Gate Repair in Burleson.
Electric Gate Repair in Burleson
Electric gate repair in Burleson usually means tracing a fault through the low-voltage side of the system: a shorted photo-eye wire, a failed control board, a transformer that quit, or a keypad that’s no longer reading codes. Lightning and power surges from summer storms are a real factor here, and we see far more control-board replacements in Burleson after a June squall than in January. Calder technicians carry the common boards, transformers, and safety-edge parts on the truck so most electric repairs are finished on the first visit. Read more at Electric Gate Repair in Burleson.
Gate Opener Repair in Burleson
When a gate opener fails in Burleson, the common culprits are a stripped drive gear, a worn-out capacitor, a limit switch that’s drifted out of adjustment, or a battery pack that’s no longer holding charge on a solar-assisted opener. Calder Gate Repair is factory-familiar with nine major brands, and we typically see Linear, Viking, Ghost Controls, and DoorKing units across Burleson. Most opener repairs are completed the same visit, and we recalibrate travel limits and force settings before we leave. The full picture is at Gate Opener Repair in Burleson.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burleson
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers across Burleson. Our trucks carry common control boards, remote receivers, safety edges, and capacitors for these brands, which means most repairs finish in one trip. See our brands page for the full compatibility list.
Pricing for Gate Company in Burleson, TX
Here’s what you can expect to pay for common gate repair work in Burleson before parts. Every quote is put in writing before any work starts, and that written number is what you’ll pay on the invoice.
| Service | Typical range in Burleson |
|---|---|
| Gate repair service call (diagnostic) | $49 – $99 |
| Gate opener repair (labor only) | $185 – $345 |
| Electric gate repair (control board replacement) | $285 – $550 |
| Limit switch replacement or adjustment | $120 – $240 |
| Photo-eye or safety sensor replacement | $130 – $250 |
| Hinge replacement (per hinge) | $95 – $185 |
| Gate wheel or roller replacement | $110 – $220 |
| Keypad or intercom replacement | $165 – $320 |
| Complete opener replacement (parts and labor) | $650 – $1,350 |
Two things push prices higher in Burleson than the low end of each range: the weight of the gate itself, and how far the property sits from main roads like Renfro Street or Alsbury Boulevard once you’re out on county roads. Heavy custom iron gates take longer to lift, shim, and realign, and that labor is honestly billed. Before any screw turns, you get a written price. If the final job needs something extra, we call first; we never hand you a surprise invoice.
Neighborhoods We Serve in Burleson
Calder Gate Repair dispatches crews daily to the full Burleson area, including the neighborhoods that call us most often:
- Oak Valley
- Shannon Creek
- Mistletoe Hill
- Parks of Panchasarp Farms
- Bailey Meadows
Most Burleson neighborhoods get same-day or next-morning response depending on call volume. Acreage properties south of town may take a little longer to reach, but we’ll always quote you a live arrival window that you can track on your phone.
Service Area – Cities Near Burleson
If you’re just outside Burleson in a neighboring city, you can still book Calder Gate Repair from the same phone line. We regularly serve Crowley, TX, Joshua, TX, Alvarado, TX, and Kennedale, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with local crews covering the Burleson area.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Burleson
Most Burleson addresses get same-day or next-morning response, with a live, trackable arrival time sent before the technician heads your way. Acreage properties south of town may see a slightly longer drive, but the window stays precise. Call (903) 417-0793 to confirm today’s availability.
If your Burleson property is in an HOA with architectural standards, check your covenants for rules on gate style and height before replacing a gate or opener. Repairs to an existing approved gate rarely need approval. We can’t file HOA paperwork for you, but we’ll tell you clearly if the work changes gate appearance.
Parts are priced separately from labor, and you’ll see both line items on the written quote before any work starts. Common parts like control boards, sensors, and capacitors are stocked on our trucks, so most Burleson repairs finish in one visit. The price on your invoice is the price you agreed to at the door.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burleson Customers Say
"Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L."Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C.