Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Keene, TX
When a gate stops opening in Keene, TX, you need a technician who understands the specific stresses Johnson County properties put on gate hardware. We’re Calder Gate Repair, and we fix gates, electric gate systems, and gate openers across Keene, from the neighborhoods south of the Southwestern Adventist University campus to the acreage properties off County Road 312. Our crews arrive in uniform, start with a written price, and get most repair jobs done in a single visit. Call (903) 417-0793 and a live person answers, day or night.
Why Keene Homes Are Different
Keene sits in the northern stretch of Johnson County, where concrete slab foundations and caliche-heavy soil create one gate problem we see more than any other: posts that shift with the seasons. The freeze-thaw cycle during North Texas winters, combined with summer heat that can top 100 degrees, means gate frames flex and opener arms fall out of alignment. A gate that worked fine in March may drag or bind by August.
Many Keene homes were built in the 1980s through early 2000s, and a lot of those gates are original to the property. That matters because older gate hardware was often installed without enough clearance for the clay soil movement common here. We routinely rebuild hinge posts in Keene with deeper concrete footings than the original installation, because the soil demands it. Properties along Old Betsy Road and around the residential blocks near College Drive tend to have longer driveways and wider gate spans, which means heavier gate operators and more frequent limit switch adjustments, the small sensors that tell the gate when to stop moving.
HOA presence is light across Keene, but newer subdivisions near the south end of town sometimes have architectural guidelines for gate style and finish. If your community has a rule about gate height or material, mention it when you call. We can work within most association requirements, and we’ll tell you plainly if something in your plan won’t pass review.
Our Main Keene Services
Most Keene homeowners call us for one of three problems: a gate that won’t open at all, an electric gate acting erratically, or an opener that runs but doesn’t move the gate. Here’s what each job looks like in Keene specifically.
Gate Repair in Keene
A sagging or stuck gate in Keene usually comes down to one of three things: shifted hinge posts from the soil movement we described above, a bent frame from years of wind load, or hardware that’s simply worn out. We replace hinges, rebuild post footings, straighten frames, and weld cracks on-site when the job calls for it. On properties with long dirt or gravel driveways, we also check gate wheels and track hardware that take extra abuse from dust and grading. Before any repair starts, you get the price in writing. After it’s done, the 365-Day Done Right Promise covers you for a full year. See Gate Repair in Keene for the full breakdown of what a repair involves and what it costs.
Electric Gate Repair in Keene
Electric gates add a layer of complexity: the mechanical gate itself plus the electrical system driving it. In Keene, afternoon thunderstorms are a real factor. Power surges and nearby lightning strikes take out control boards and transformer wiring more often than people expect, and we carry replacement boards for the major brands on our trucks so we don’t have to order parts and make you wait. Symptoms like a gate that opens but won’t close, a keypad that stopped responding, or a motor that hums without moving are all in our wheelhouse. Read Electric Gate Repair in Keene for the full rundown on diagnosing electrical faults safely.
Gate Opener Repair in Keene
When the opener motor runs but the gate doesn’t move, or the remote works intermittently, you’re dealing with an opener problem rather than a gate problem. These are common on Keene properties where the opener was installed a decade or more ago and has never been serviced. We work on Viking, Ghost Controls, DoorKing, and Elite openers, among others, and we’re factory-familiar with the control board programming and safety sensor logic for each. A broken opener isn’t just inconvenient, it leaves your property exposed, and we treat those calls as urgent. Get the specifics at Gate Opener Repair in Keene.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Keene
Our technicians train on the gate opener brands Keene homeowners actually have installed, including Viking, Ghost Controls, DoorKing, and Elite. Because these brands share some component families, we stock common replacement parts locally and can often complete a repair the same day we diagnose it. See our brands page for the full factory-familiar list.
Pricing for Gate Company in Keene, TX
Gate repair pricing in Keene runs from small, focused fixes to full opener overhauls. Here are the ranges we typically quote before parts are added. Every job gets a written price before any work begins, so the number on the invoice is the number you approved, never a surprise.
| Service | Typical range in Keene |
|---|---|
| Service call + written diagnosis | $75 – $125 |
| Hinge replacement (standard single gate) | $150 – $300 |
| Post reinforcement / concrete footing repair | $250 – $500 |
| Gate frame straightening or welding | $100 – $350 |
| Gate wheel or roller replacement | $75 – $200 |
| Electric gate control board replacement | $200 – $450 plus parts |
| Transformer or power supply replacement | $125 – $300 |
| Keypad or receiver replacement | $100 – $250 |
| Opener arm or actuator repair | $175 – $400 |
| Full opener replacement (parts + labor) | $600 – $1,800 |
What pushes a Keene job toward the higher end of these ranges is usually scope: a gate that needs post work plus hinge work plus a new opener is three jobs on one call. If your gate is at the bottom of a long driveway on rough caliche, we may also need additional safety edges or photo-eye sensors to meet current code, and that adds a line item. We quote all of it before we touch a bolt.
Neighborhoods We Serve in Keene
We cover all of Keene, including the residential blocks around the university, the older homes east of Highway 67, and the larger-lot properties extending toward the county line. Here are a few areas we work in regularly:
- Southwestern Adventist University area
- College Drive residential corridor
- Old Betsy Road properties
- Neighborhoods east of I-35W along County Road 312
- South Keene subdivisions
Typical response time for a Keene call is same-day for urgent repairs and next-day for scheduled service, depending on when you reach us. The live person who answers can give you a trackable arrival window before we dispatch.
Service Area – Cities Near Keene
If you’re in a neighboring community, we cover those too. Our service area stretches across Johnson County, and many clients in Cleburne, TX, Joshua, TX, Alvarado, TX, and Burleson, TX call us for the same upfront pricing and written guarantee we offer in Keene.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Keene
On most days, we can have a technician in Keene within a few hours for urgent repairs. Since we dispatch locally from the Dallas-Fort Worth area with crews serving Keene, the live person you speak to can confirm an arrival window while you’re on the phone. Scheduled work is typically next-day.
Most gate repairs and opener replacements in Keene don’t require a permit. If the job involves running new electrical line from the main panel to the gate, a permit may be triggered, and we’ll tell you during the written estimate. HOA rules, where they apply, are separate, and we’ll work within what your association requires.
It’s simple: if the repair we performed fails within 365 days, Calder Gate Repair returns to Keene and makes it right at no charge. That includes a free second visit for the repair, and the guarantee is written on every job. The only thing it doesn’t cover is new damage caused after we leave, which we’ll always show you with before-and-after photos.
Have a gate that won’t budge, a keypad that’s dead, or an opener that quit after the last storm? Call Calder Gate Repair at (903) 417-0793 for a free estimate on any gate job in Keene. You’ll get a written price before we start, a live person on the phone, and a repair that’s covered for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keene Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.