Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Cleburne, TX
Gate repair in Cleburne, TX usually starts with a simple question: is the opener dead, or is the gate itself binding against the post? Most jobs we see run between $180 and $340 before parts, and we can often get a technician out the same day. Cleburne’s mix of older ranch-style homes, newer subdivisions, and acreage properties means gate hardware varies a lot from street to street, and the fix almost always depends on what’s actually installed out there. If you need a gate company in Cleburne that gives you a written price before anything comes apart, call us at (903) 417-0793.
Why Cleburne Homes Are Different
Cleburne sits in Johnson County where the soil is heavy clay. That matters for gates more than people expect. Clay expands when wet and shrinks when dry, so posts shift over time, and a gate that swung perfectly in April can drag against the latch plate by August. We regularly see this on properties along Nolan River Road and in older neighborhoods near downtown Cleburne, where gates were installed decades ago without concrete footings sized for this soil. When we repair a gate in Cleburne, we always check the post alignment first. Replacing an opener without fixing a shifted post means the new opener works harder and fails sooner.
The other thing about Cleburne is the wind. Spring storm season pushes hard against solid-panel gates, which puts strain on hinges, welds, and opener arms. A welded steel gate that’s fine in calm weather can twist just enough in a March storm to throw the limit switch off, which is the small sensor that tells the gate when to stop. This is also cattle country. A lot of Cleburne acreage properties use heavy pipe gates that were never meant to be automated, and retrofitting those takes a different approach than a residential driveway gate in a subdivision. We plan for the gate that’s actually on your property, not the one a catalog shows.
Our Main Cleburne Services
Most Cleburne homeowners call us for one of two reasons: the gate won’t move at all, or the opener is making noise but not doing its job. Each service has its own detailed page below.
Gate Repair in Cleburne
Gate repair in Cleburne often comes down to steel fatigue, shifting posts, or worn hinges. We inspect the full gate, not just the part that broke, because a sagging weld or a dragging wheel will shorten the life of anything else we fix. In Cleburne’s clay soil, we check post footing movement on every repair, even when the customer called about something else entirely. See our full breakdown of Gate Repair in Cleburne for specifics on how we diagnose and fix common failures.
Electric Gate Repair in Cleburne
Electric gates in Cleburne deal with a lot: heat, storms, and occasional power flickers from the local grid. We trace problems from the operator box back through the wiring, safety loops, and photo eyes to find the actual point of failure. Cleburne homes with older electric gate systems often have wiring that was never rated for the load the opener pulls during a hot summer afternoon. For the full scope of Electric Gate Repair in Cleburne, including how we test safety sensors and loops, visit that page.
Gate Opener Repair in Cleburne
Gate opener repair is what we do most in Cleburne. Most openers fail either from a worn capacitor, a failed limit switch, or a control board that got fried by a power surge. We stock parts for the major brands and can usually rebuild an operator the same visit rather than telling you to wait a week for a new board. Many Cleburne homes use LiftMaster or Ghost Controls openers, and we’re factory-familiar with both. Read the full Gate Opener Repair in Cleburne page for pricing, brand-specific notes, and what to check before you call.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Cleburne
We work on Linear, Viking, and DoorKing openers most often in Cleburne, along with several other major brands. Our techs carry common replacement boards, remotes, and limit switches in their vehicles, so many repairs don’t require a second trip. You can see the full brand list on our brands page.
Pricing for Gate Company in Cleburne, TX
| Service | Typical range in Cleburne |
|---|---|
| Gate opener repair (labor only) | $180 – $340 |
| Gate opener replacement (new unit + install) | $450 – $1,100 |
| Electric gate wiring repair | $220 – $480 |
| Hinge replacement (single gate) | $150 – $300 |
| Weld repair (per joint) | $120 – $250 |
| Safety sensor / photo eye replacement | $180 – $320 |
| Control board replacement | $250 – $500 |
| Remote and keypad programming | $80 – $160 |
| Post realignment (minor) | $200 – $400 |
What pushes a Cleburne price toward the top of these ranges is usually access and preparation: gates set far back from the road, posts that need digging out rather than just adjusting, or older hardware that needs custom fitment. You’ll always get a written quote before we start, and the number on your invoice will match the number we agreed to at the door.
Neighborhoods We Serve in Cleburne
We run calls all over Cleburne and the surrounding county, from the older streets near downtown to the newer developments on the north and east sides. Most residential Cleburne jobs get a technician out same day or next morning.
- Downtown Cleburne
- Westhill area
- Bellevue subdivision
- Nolan River Road corridor
- Acreage properties off FM 4 and FM 1434
Service Area – Cities Near Cleburne
While this page focuses on Cleburne, our crews also cover the surrounding Johnson County communities. If you’re in Keene, TX, Joshua, TX, Alvarado, TX, or Burleson, TX, you’ll get the same written-price guarantee and the same 365-Day Done Right Promise. Dispatch is coordinated from our Dallas-Fort Worth office, and technicians serve Cleburne locally.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Cleburne
Most Cleburne gate repair calls are scheduled for same day or next morning. Losing a gate means losing security, so we prioritize openers that won’t close over cosmetic repairs. When you call (903) 417-0793, a live person gives you a real arrival window, not a four-hour spread.
Repair work on an existing gate and opener typically doesn’t require a permit in Cleburne. New gate installations or anything involving new electrical runs may need approval from the City of Cleburne. We’ll tell you before any work starts if your job needs city sign-off.
Yes. We regularly service ranch gates, pipe gates, and long driveway systems in unincorporated Johnson County around Cleburne. These often need heavier openers than residential models, and we’ll spec the right hardware for the gate’s weight and duty cycle. Call us for a free estimate, and we’ll confirm coverage for your exact address.
If your gate is stuck, sagging, or the opener just hums and does nothing, call Calder Gate Repair at (903) 417-0793 for a free estimate. You’ll get a written price before we touch a single bolt.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Cleburne Customers Say
"Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R.