Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Cleburne
Electric gate repair in Cleburne usually comes down to one of three things: a power problem at the operator, a physical issue with the gate itself, or a safety sensor that’s lost its alignment. Most repairs run $180 – $340 before parts, and we can typically have a tech at your property within a few hours of your call. If your gate is stuck open, stuck shut, or stopping midway, call Calder Gate Repair at (903) 417-0793 and a live person will answer, day or night.
Cleburne isn’t Dallas or Fort Worth. The properties here sit on bigger lots, the drives run longer, and a gate that won’t open doesn’t just slow you down, it locks you away from your home or traps your vehicles inside. We work on gates off Nolan River Road, along the Chisholm Trail Parkway corridor, and out toward the county roads past Lake Pat Cleburne. The same failure modes show up again and again, and we know what to look for before we even pull into your drive.
What sets Electric Gate Repair work apart in Cleburne is how much of it ties back to power. More on that below, but for now, know this: you’ll get a written price before anything starts, a live arrival time you can track from your phone, and a repair that’s covered by our 365-Day Done Right Promise. If it fails within the year, we come back at no charge. No fine print, no runaround.
Why Calder Gate Repair Is Cleburne’s Preferred Electric Gate Repair Company
We’re not a general handyman service that occasionally touches a gate. Calder Gate Repair is the dedicated gate specialist inside the Relay Home Co. family, and we’ve been doing this work since 2009. Every tech who responds to a Cleburne call is background-checked, uniformed, and factory-familiar with the brands actually installed on Johnson County properties: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Cleburne homeowners tell us the same things over and over: they’re tired of vague four-hour windows, they want to know who is showing up, and they want the price locked before a single bolt gets turned. That’s exactly how we run every job. When you book with us, you get The Relay Standard: a live, trackable arrival time, before-and-after photos of the repair, and a digital invoice you can pay from a link. No phone tag, no guesswork.
Our team knows the local landscape. We’ve worked properties from the older neighborhoods near downtown Cleburne to the newer builds off Country Club Road and the acreage spreads south of town toward Keene. That local familiarity means we show up knowing what we’re likely to find, whether it’s a rusted Viking operator on an older wrought-iron gate or a DoorKing setup that’s never quite worked right since the day it was installed.
Commercial Gate Operator in Cleburne
Commercial gate operator work in Cleburne typically involves repairing, replacing, or reprogramming the motorized actuator that opens and closes a heavier gate, usually at a business entry, a small ranchette, or a community access point off roads like FM 4 or near the industrial areas around the Cleburne bypass. These operators handle far more cycles per day than a residential unit, so wear patterns are different. A commercial operator repair in Cleburne generally runs $240 – $420 before parts, depending on the operator type and whether we’re rebuilding the existing mount or replacing the unit entirely.
Operator Replacement and Controls
When a commercial operator has reached the end of its service life, the smarter fix is often a full replacement rather than patching an aging board. We quote the replacement honestly, including the operator, the mounting hardware, and the labor to get it wired and tested.
Control board failures are common on older units exposed to North Texas heat cycles. We carry boards for DoorKing and Elite operators, and we can source Viking and LiftMaster parts quickly when a board is dead rather than repairable.
Power and Safety Compliance
Commercial operators in Cleburne must meet UL 325 entrapment-protection standards, which means the photocells and reversing edges need to work every single time. We test these as part of every commercial repair, because a misaligned sensor on a heavy commercial gate is a real hazard, not a minor annoyance.
Automatic Gate Repair in Cleburne
Automatic gate repair in Cleburne is the most common call we get: a homeowner pushes the remote, the gate hums or clicks or does nothing, and now they’re either stuck outside or stuck inside. These are residential systems, usually single or double swing gates, and the fix usually falls between $180 and $320 before parts. The most frequent culprits are dead capacitors, worn limit switches (that’s the small sensor that tells the gate when to stop), failed gear assemblies, and photocells knocked out of alignment by wind or a passing mower.
Remote and Keypad Issues
Sometimes the operator is fine and the problem is the access side: a remote that won’t pair, a keypad that’s lost its code, or an antenna wire that’s come loose inside the housing. We reprogram remotes, replace keypads, and test every access point before we leave so you’re not standing there wondering if it’ll work tomorrow.
Gate Leaf and Hardware Adjustments
A surprising share of “automatic gate repair” calls in Cleburne are actually hardware problems: a sagging leaf, a hinge that’s pulling out of the post, or a wheel that’s flattened on one side. We re-level leaves, tighten or replace hinges, and dial in the operator’s force settings so it’s not fighting the gate on every cycle.
Trusted Brands We Service in Cleburne
We’re factory-familiar with the names you’ll actually find on Cleburne properties: Viking, Ghost Controls, DoorKing, and Elite, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That matters because a Ghost Controls solar opener on a double swing gate behaves completely differently from a DoorKing slide operator at a commercial entry. When a repair calls for a part, we can often pull it from local Dallas-Fort Worth stock and have it on the truck the same week, which shortens downtime for Cleburne customers who can’t wait weeks for a backorder to ship.
Common Electric Gate Repair Problems We See in Cleburne Homes
- Sagging swing gates on clay soil: North Texas clay expands and contracts with moisture, and that seasonal movement shifts gate posts enough to make a gate bind and stall. We often add post footings or re-hang the leaf before touching the operator, because adjusting the motor without fixing the post just burns out the motor.
- Voltage drop on long driveway runs: On acreage properties where the gate is 1,000-plus feet from the house, undersized low-voltage wiring starves the operator. We test voltage at the operator, not at the panel, because that’s where the truth lives.
- Solar panel and battery failures: Cleburne gets plenty of sun, but a panel that’s too small for the gate’s cycle count, or a battery that’s three years old, will leave you stuck after a few cloudy days. We size panels to the actual usage, not the marketing spec.
- Photocell misalignment: The safety eyes near the bottom of the gate get bumped by mowers, kids’ bikes, and Johnson County wind. A misaligned photocell makes the gate refuse to close, which reads as an operator failure but is really a five-minute realignment.
Pricing for Electric Gate Repair in Cleburne, TX
Here’s what Cleburne homeowners should expect to pay, before parts:
- Diagnostic visit and minor adjustment (photocell realignment, remote reprogramming, limit switch tuning): $120 – $180
- Typical operator repair (capacitor, gear, control board, or wiring fix): $180 – $340
- Solar gate system repair (panel, battery, or wiring upgrade): $200 – $380
- Commercial operator repair or replacement: $240 – $420 plus parts
- Full gate opener replacement (operator, arms, and installation): $650 – $1,400 depending on gate size and operator type
Every quote is written and agreed to before we start. The number on the invoice matches the number you approved at the door, always. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Cleburne
Calder Gate Repair covers Cleburne and the surrounding Johnson County communities. If you’re in Keene, Joshua, Alvarado, or Burleson, you get the same service, the same written pricing, and the same 365-Day Done Right Promise. Learn more about our Electric Gate Repair in Cleburne coverage and schedule a visit.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Cleburne
In Cleburne, a gate that stops midway is usually reporting a power problem: insufficient voltage reaching the operator, a failing capacitor, or a photocell that’s lost alignment and triggered a safety stop. On rural properties with long wire runs from the house, voltage drop is the most common root cause we find, and the fix is often rewiring rather than replacing the operator. Call (903) 417-0793 and we’ll test the actual voltage at the operator before recommending anything.
Yes, same-day repair is available for most Cleburne calls when you reach us before mid-afternoon, and emergency calls are answered 24/7 by a live person. A gate stuck open is a security risk, and a gate stuck shut can trap vehicles, so we prioritize those calls and give you a trackable arrival window before we head your way.
Almost never. A sagging swing gate in Cleburne usually means the hinge post has shifted in the clay soil or the hinge itself has worn. We can reset the post, repair the footing, or replace the hinge and re-level the leaf for a fraction of what a new gate costs. We’ll tell you honestly if the gate itself is beyond saving, but most of the time it isn’t.
We service Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If you’re not sure what brand you have, snap a photo of the operator and we can usually identify it from your description before we even arrive.
An automatic gate is safe only if its entrapment protection works: the photocells detect anything in the gate’s path and reverse it before contact, and the reversing edge or force sensor does the same at the gate leaf itself. We test these on every service call and can add or upgrade photocells and edges on any system we touch.
If your gate is acting up and you want someone who will give you a straight answer and a written price, call Calder Gate Repair at (903) 417-0793 today. We’ll talk through what’s happening, give you a real arrival window, and fix it right.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family serving Cleburne and Johnson County.