Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Cleburne
Gate repair in Cleburne usually runs $185 – $440 for most hinge, sag, and operator fixes, and our techs typically reach Cleburne within 60 – 90 minutes of your call. We know the west-side properties with long steel driveway gates, the in-town lots near the courthouse square, and the acreage off Nolan River Road. Calder Gate Repair works on welded steel, tube-frame, and ornamental gates every week here, and we quote a written price before any work starts. Call (903) 417-0793 and a live person answers, day or night.
Why Calder Gate Repair Is Cleburne’s Preferred Gate Repair Company
Cleburne homeowners deal with a specific set of gate problems, and we see them often enough to know exactly what’s happening before we arrive. The clay soil here shifts. Heavier custom steel gates put real load on hinge posts. When a post moves even half an inch, the gate starts dragging, the opener strains, and the limit switches go out of sync. Most people assume the motor died. Most of the time, it hasn’t.
We’re part of the Relay Home Co. family, established 2009, and the gate repair specialty sits with Calder – independently owned and operated, with techs background-checked, uniformed, and dispatched with a live arrival time you can track from your phone. No four-hour windows. No voicemail roulette. Our team carries parts for Linear, Viking, Ghost Controls, and DoorKing on the truck, so a Cleburne call often ends with the gate working the same day.
Every job gets three things in writing: the price before we start, the guarantee on the repair, and a free second visit if the fix fails within 365 days. That’s the 365-Day Done Right Promise. If it’s not right, Calder makes it right.
Driveway Gate Repair in Cleburne
Driveway Gate Repair on Cleburne homes is rarely just about the gate panel. The typical call is a gate that drags, won’t close fully, or trips the opener halfway through its travel. On a west-side Cleburne property with a heavy steel swing gate, the hinge post has often moved in the clay. The gate sags. The opener works harder. Eventually something fails – usually a hinge, a limit switch, or the operator’s internal gearing.
Our Gate Repair team starts by checking the hinge post and footing before touching the operator. If the post is solid, we correct the sag, re-align the leaf, and re-set the opener limits. If the post has moved, any sag correction alone will fail again within months. A proper Cleburne driveway gate repair runs $225 – $440 on most properties, parts included for common hinge and bracket work.
Steel gate sag correction
We pull the gate, inspect the hinge welds and post plumb, then re-set and re-hang. On tube-frame gates, we also check the corner welds – Cleburne’s older steel gates fatigue at the corners, and a sagging leaf often hides a cracked weld ready to open up.
Opener alignment and limit reset
Once the gate hangs true, we re-align the operator arm or chain and re-set the open/close limits so the motor stops exactly where it should. This step prevents the opener from grinding against the stops and burning out prematurely.
Gate Welding in Cleburne
Gate Welding is the unsung half of reliable gate repair in Cleburne. Many gates here were custom-built from steel or welded tube frames rather than off-the-shelf panels, especially on properties with wide driveways or angled approaches. Those frames develop fatigue cracks at the corners and hinge mounts. A cracked gate doesn’t just sag – it twists, bind, and eventually tears out a hinge under its own weight.
We handle on-site weld repair for steel, ornamental, and tube-frame gates across Cleburne. The job usually involves grinding the crack back to clean metal, welding the joint, reinforcing the hinge plate if needed, and repainting the repaired area. A typical Cleburne gate welding repair runs $150 – $350 depending on the crack length and whether we need to reinforce a hinge point or add gussets. For heavier repairs, we quote the full scope before striking an arc.
Corner and hinge mount reinforcement
We see cracked hinge plates on Cleburne gates more than anywhere else we work. The heavy leaf, the clay-driven post movement, and years of use concentrate stress right at the hinge tube. We weld the crack and add a gusset or plate so the repair holds under load, not just until the next dry summer.
Post footing repair
When a hinge post shifts in North Texas clay, welding the gate alone won’t fix it. We dig the footing, re-set the post plumb in concrete, brace it while it cures, then re-hang the gate. This is the critical step that separates a one-year fix from a five-year fix in Cleburne soil.
Trusted Brands We Service in Cleburne
We repair and maintain gate openers from the brands Cleburne homeowners actually have on their properties. Linear and DoorKing are common on tube-frame and chain-drive gates here. Viking and Ghost Controls show up on solar and battery-powered systems on larger lots and acreage. If you don’t know the brand, that’s fine – we’ll identify it and tell you what we find. We carry common replacement parts and control boards for these brands in our trucks, so most Cleburne jobs don’t wait on a shipping delay.
Common Gate Repair Problems We See in Cleburne Homes
- Hinge post movement from clay soil. Cleburne’s clay expands when wet and contracts hard in summer droughts. Heavy custom steel gates multiply the stress, and the post slowly tips. The gate drags, the opener trips, and the hinges wear out fast.
- Safety sensor faults on automatic openers. Photocells near the gate path get bumped by mowers, fouled by grass clippings, or misaligned by wind. The opener usually reverses or refuses to close – and the motor gets blamed. We re-align or replace the sensors and re-test the reversal function.
- Welded steel frame fatigue. Tube-frame gates on older Cleburne properties crack at the corners and hinge mounts. The cracks grow slowly, then fail suddenly. Early signs are a gate that sags progressively or rattles louder than it should.
- Operator limit switch drift. Openers that bang against the stops or don’t close all the way usually have worn or drifted limit switches – the small sensors that tell the gate when to stop. We replace or re-set them and verify the full travel cycle.
Pricing for Gate Repair in Cleburne, TX
Here’s what Cleburne homeowners can expect, written plain. A hinge post reset or sag correction runs $225 – $440. On-site gate welding runs $150 – $350, with heavier frame reinforcement towards the top of that range. Gate opener diagnosis and limit/photo-eye repair runs $185 – $350, including most control board or sensor replacements. Full operator replacements are quoted by brand and model – we’ll show you the number before ordering anything. Every quote is in writing, agreed before we start, and the invoice matches to the dollar. Call (903) 417-0793 for a free estimate.
We Also Serve Cities Near Cleburne
Our Cleburne service area includes Keene, Joshua, Alvarado, and Burleson. Same dispatch team, same written pricing, same 365-day guarantee. If you’re just outside Cleburne proper, call and we’ll confirm coverage and the expected arrival window.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Cleburne
Look at the gap between the gate leaf and the post. If the gap widens toward the bottom, the leaf has sagged. But if the post itself leans even slightly out of plumb, no sag correction will hold. On Cleburne clay soil, post movement is the root cause on most heavy steel gates. We check plumb with a level before recommending anything – and the fix is quoted before we start. Call (903) 417-0793 for an on-site check.
Yes. Any automatic gate opener installed on a Cleburne residential or commercial property must have functioning safety photocells and a working reversal system that stops and reverses when the gate hits an obstruction. We test the reversal force and photo-eye alignment at the end of every opener repair and document it on your invoice. If your gate closes hard or won’t reverse on contact, call us before someone gets hurt.
We service Linear, Viking, Ghost Controls, DoorKing, and five other major brands: LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Cleburne properties with older tube-frame gates and chain-drive openers, Linear and DoorKing are the ones we repair most. We carry common boards and remotes on the truck, so many jobs are done in a single visit. Call (903) 417-0793 and we’ll tell you if we can fix yours today.
Almost always, yes. We carry mobile welding equipment and can repair steel and tube-frame gate cracks on-site at your Cleburne property. We grind to clean metal, weld the joint, reinforce the hinge point if needed, and repaint. Most corner cracks run $150 – $350. If the crack is extensive or the post has moved, we’ll quote the fuller scope before any work begins. Call (903) 417-0793 for a free estimate.
No, and we won’t promise that. A new driveway gate in Cleburne is a measured, ordered, scheduled job – it involves groundworks, post footings, concrete curing, operator installation, safety edge installation, and full reversal testing. Realistically, you’re looking at 1 – 3 weeks from site measure to completed install. We do provide a free measure and a written quote before anything is ordered, so you know the total price and timeline up front. Call (903) 417-0793 to book your measure.
Written by Nico Alvarez, Owner at Calder Gate Repair. Nico leads a team of background-checked, factory-trained gate technicians serving Cleburne and the surrounding Johnson County area, with dispatch coordinated from the Dallas-Fort Worth office. Calder Gate Repair is part of the Relay Home Co. family, established 2009.