Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keene
Gate repair in Keene comes down to fixing the part that actually failed, not selling you a whole new system. Most problems we see across Keene involve a hinge post footing that gave way in clay soil, a low-voltage run that’s underpowered, or a safety sensor that got misaligned and now blocks the gate from moving at all. We’re Calder Gate Repair, part of the Relay Home Co. family since 2009, and we send background-checked, uniformed technicians to Keene with a live arrival time you can track from your phone. Call (903) 417-0793 and a real person answers, 24/7.
Why Calder Gate Repair Is Keene’s Preferred Gate Repair Company
Keene homeowners call us because we tell them what’s wrong in plain words and put the price in writing before a single bolt gets turned. Our technicians know the difference between a Viking operator that needs a limit switch replacement and a Ghost Controls board that’s simply lost its programming, which means fewer return trips and a repair that stays repaired. The Gate Repair team at Calder works under one standard: if it fails within 365 days, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s stated in writing on every job we do in Keene, not buried in fine print.
When you book, you’re not getting a vague four-hour window. You get The Relay Standard: a live, trackable arrival time, before-and-after photos, and a digital invoice you can pay from a link. For rural Keene properties off Farm-to-Market roads, that kind of clarity matters. You can’t always meet a technician at the gate, but you can watch exactly where they are and what they fixed. Every call to (903) 417-0793 is answered by a live person who can book you, update you, or walk through a gate problem right then.
Nico Alvarez leads the Calder Gate Repair team, and he’s built the service around a simple rule: the customer gets a real diagnosis, a real price, and a real guarantee. No invented upsells. No vague promises. That’s why Keene homeowners keep our number saved in their phones.
Driveway Gate Repair in Keene
Driveway Gate Repair in Keene usually starts with a sagging panel, a grinding operator, or a gate that stops halfway and refuses to move. Here’s what that actually means: the hinge post footing has shifted in Keene’s clay-heavy soil, the chain or belt has stretched, or the operator’s internal limit switch, the small sensor that tells the gate when to stop, has drifted out of adjustment. In Keene, a typical hinge and post repair runs $280 – $520 before parts. A gate realignment, where we bring the gate back to square and reset the post if needed, runs $220 – $450. Repairs that involve a failed operator board or motor run higher because the part itself costs more, and we give you the exact figure in writing before we touch anything.
Gate Realignment and Post Resetting
A gate that drags on the driveway apron isn’t just noisy. The panel weight is now sitting on the operator, and that’s how motors burn out early and boards fry. We reset post footings to the proper depth, correct alignment, and re-test the full travel so the gate clears on every cycle. On Keene’s clay soils, we’ve seen plenty of shallow-set pipe posts that heaved after a few wet seasons. Resetting one properly means the next repair is years away, not months.
Hinge and Post Repair
Older in-town Keene lots often have swing gates hung on original posts that were never meant to carry an operator. The hinge welds crack or the post leans, and the gate starts binding at the latch. We replace hinges, reinforce or reset the post, and adjust the operator so it isn’t fighting the gate’s weight. If a weld on the frame itself is cracked, that’s a gate welding job, and we can do it on-site rather than sending the gate out to a shop.
Gate Welding in Keene
Gate Welding in Keene means structural repair, not just cosmetic touch-ups. When a crack runs through a gate rail, a hinge tears off, or rust has eaten through the bottom tube, welding is the fix that keeps the gate safe and square. In Keene, where many rural properties use pipe-and-cable gates, the cable can pull brackets loose and the pipe rails can fatigue at the weld joints. A typical on-site gate frame weld repair runs $180 – $420 depending on the number of failed joints and whether we need to add reinforcing plate. A hinge re-weld with post reinforcement runs $250 – $550. All prices are quoted and agreed before any work starts; the invoice matches the quote, every time.
Weld and Rust Repair
Rust is a slow killer here, especially on lower rails where moisture sits against the ground. We cut out rusted sections, weld in new steel, and then treat the repair so it doesn’t start rusting again at the weld line. If the gate is rusted enough that the structural rail has lost its wall thickness, we’ll tell you honestly whether a repair is safe or the section needs replacing, and we’ll show you why on-site.
Frame Straightening and Reinforcement
A gate panel that’s bowed or twisted can often be straightened and gusseted rather than replaced. We add reinforcement plate at the high-stress points near the hinges and operator bracket, which spreads the load and stops the same failure from repeating. For Keene homeowners with long ranch-style gates, this is usually the difference between a repair that lasts and one that fails under the next wind load.
Trusted Brands We Service in Keene
Calder’s technicians are factory-familiar with nine major gate opener brands, and around Keene we see Viking and Ghost Controls on a lot of rural solar setups, plus DoorKing and Elite on larger slide gates. We stock common boards, remotes, and safety sensors locally so a Keene repair doesn’t wait on a week-long parts shipment. If your Mighty Mule opener is flashing a fault code, or your LiftMaster keypad won’t accept a new PIN, we can usually diagnose it on the first visit. Same brands, same parts, one guarantees: written price, written warranty, and a free second visit if the repair fails within 365 days.
Common Gate Repair Problems We See in Keene Homes
- Sagging swing gates on shallow post footings. Keene’s clay soil expands and contracts hard through wet and dry seasons, and posts set shallow heave or lean. The gate then drags, the operator strains, and the panel looks like it’s failing when it’s actually the footing underneath that’s the problem.
- Low-voltage runs that drop under load. Acreage properties far from newer utility corridors often have long wire runs, and voltage drop at the operator means a slide gate that trips the breaker or refuses to cycle at all. Solar gate openers are a practical fix out here, not just an upgrade.
- Safety photocells that got disabled to stop the gate from reversing. We see it often in Keene: a homeowner or a previous tech bypassed a misaligned sensor because the gate kept reversing for no visible reason. The gate then works, but it’s no longer UL 325 compliant, and an open entrapment hazard is a serious risk to kids and pets.
- Rust and fatigue at weld joints on older pipe gates. Many rural Keene entries were built with steel pipe frames years ago, and the welds at the hinge and operator brackets crack with age and wind load. A proper weld repair and reinforcement keeps the gate in service without replacing the whole structure.
Pricing for Gate Repair in Keene, TX
Here’s what Keene homeowners can expect, in real numbers. Gate realignment and post resetting: $220 – $450. Hinge and post repair: $280 – $520. On-site gate welding: $180 – $550 depending on the number of failed joints and whether we add reinforcing plate. Operator board or limit switch replacement: $190 – $380 before the part cost, which varies by brand, and we itemize every part on the written quote. A full operator replacement on a swing gate starts around $650 and goes up with panel size and access control. Every quote is written and agreed before work begins, and the 365-Day Done Right Promise means the invoice you pay is the invoice you approved. Call (903) 417-0793 for a free estimate, and a live person picks up.
We Also Serve Cities Near Keene
Based out of the Dallas-Fort Worth metro office, Calder Gate Repair sends crews to Keene and the surrounding area every week. You’ll find us in Cleburne, Joshua, Alvarado, and Burleson, where the same written-price guarantee and 365-Day Done Right Promise apply. If you’re just over the city line, the truck still comes to you.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keene
Usually not. The problem is almost always the hinge post footing, not the panel itself. Keene’s clay soil heaves with moisture, and a shallow-set post tilts enough to drag the gate on the apron. We reset the footing, re-hang the gate, and the panel stays. Only if the steel is rusted through or cracked structurally would we recommend replacement, and we’ll show you the damage before you commit. Call (903) 417-0793 for a free on-site assessment.
Yes, and for many rural Keene properties it’s the most reliable option. Long low-voltage runs from the house to the gate drop voltage enough to make an AC operator trip or refuse to cycle. A solar opener with a properly sized battery bank avoids that entirely and powers the operator, keypad, and safety photocells independently. We install and service solar openers from Viking, Ghost Controls, and Mighty Mule. Call (903) 417-0793 and we’ll tell you if solar is right for your setup.
We do. Swing gates are common on older in-town Keene lots and many rural pipe-and-cable entries, while slide gates show up on newer driveways and properties with more horizontal room. Both use similar operator logic but different mechanical failure points, and our technicians are trained on DoorKing, Elite, LiftMaster, and the other major brands. Call (903) 417-0793 and tell us what your gate is doing, or not doing, and we’ll schedule a diagnostic visit.
Test the reversal. Place a solid object in the gate’s path while it closes; the gate should reverse and reopen before making hard contact, and the same goes for the safety edge if one is installed. If your gate keeps reversing for no reason, don’t disconnect the sensor to stop it. That bypasses UL 325 entrapment protection and leaves a serious safety hazard. Our Keene technicians realign and test photocells and edges on every repair, and we’ll walk you through a basic test you can run yourself. Call (903) 417-0793 if anything fails that test.
Absolutely. On-site welding is one of the most common repairs we do in Keene, especially on older steel pipe gates where the hinge or operator bracket welds have fatigued. We cut out the cracked section, weld in new steel, add reinforcement plate where needed, and treat the repair against rust. It’s almost always cheaper than a replacement, and the gate keeps its original look. Call (903) 417-0793 for a written quote on a weld repair at your Keene property.
One More Thing About Keene Gate Repairs
Here’s what we’ve learned from years of work around Keene: the gate panel is rarely the thing that failed. It’s the footing under the post, the voltage at the operator, or a safety device someone bypassed. We saw it on a property off a rural Keene road where a 16-foot swing gate had been sagging for months and had begun dragging on the concrete apron. The hinge post was a shallow set pipe that had heaved, so instead of just swapping hinges we reset the post footing, corrected the sag, and paired a new LiftMaster operator with a functioning safety photocell and keypad entry. The gate now clears the apron on every cycle and passes its reversal test. That’s the fix-done-once standard we bring to every Keene job, and it’s why we can offer the 365-Day Done Right Promise in writing. If your gate is dragging, tripping, or refusing to move, call (903) 417-0793 now. A live person answers, and your written quote won’t cost you anything.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Keene with written-price gate repair, multi-brand opener expertise, and the 365-Day Done Right Promise.