Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Benbrook
Gate repair in Benbrook typically runs $180 – $450 for common fixes like hinge post realignment, limit switch replacement, and sag correction, with most jobs completed same-day when parts are on the truck. If your gate is sticking, reversing mid-cycle, or refusing to open, call Calder Gate Repair at (903) 417-0793. We dispatch background-checked technicians to Benbrook neighborhoods with a live arrival time you can track, and every repair starts with a written price before any work begins.
We know Benbrook’s gates fail in specific ways that Fort Worth gates often don’t. The expansive clay soil under much of this city moves with every wet-dry season, which means hinge posts shift, slide tracks settle, and operators bind in ways that a generic fix won’t solve. Familiarity with those local conditions is the difference between a repair that holds and one that fails again in six months.
We’re part of the Relay Home Co. family, established 2009, and our Benbrook crews carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. That means less waiting on ordered parts and more getting your gate working today.
Key Takeaways
- Most Benbrook gate repairs cost $180 – $450 and are completed same-day for common failures.
- Benbrook’s expansive clay soil directly causes hinge post movement and slide track settlement, which are the two most common repair triggers we see here.
- Every job includes a written price before work starts, a written 365-Day Done Right Promise, and a free second visit if the repair fails.
- Calls are answered by a live person 24/7, not a voicemail or chat bot.
Why Calder Gate Repair Is Benbrook’s Preferred Gate Repair Company
Benbrook homeowners call us because we treat a gate repair as a diagnostic job first, not a parts swap. A gate that reverses halfway open off Winscott Road is rarely just a bad board. It’s often a hinge post that has lifted from clay movement, or a photocell that has been knocked out of aim by ground shift. Our technicians look for the root cause before quoting anything, and the price you see in writing is the price you pay, no surprises at the door.
The Relay Visibility Guarantee shapes how every Benbrook job runs. When you book, you get a live, trackable arrival time on your phone, not a vague four-hour window. The technician arrives in uniform, background-checked, and walks you through what they found before any repair begins. You’ll receive before-and-after photos of the work and a digital invoice you can pay from a link. That’s the workflow our Gate Repair team uses across every job, because phone-first homeowners shouldn’t have to chase down paperwork.
Our standing in Benbrook is built on the 365-Day Done Right Promise, which we state in writing on every repair. If the fix fails within a year, Calder returns at no charge. That’s not a marketing line. It’s the guarantee we’ve operated under since 2009, and it’s why Benbrook homeowners on Timberline Drive, Bella Flora, and the neighborhoods around Benbrook Lake trust us with their gates.
Commercial Gate Repair in Benbrook
Commercial gate repair in Benbrook covers the operators, safety loops, and access hardware used on light industrial lots, storage facilities, churches, and multi-tenant properties. These are high-cycle gates that fail faster when ground movement from the area’s clay soil shifts the track or post. A typical Benbrook commercial gate repair runs $250 – $650 depending on whether the issue is a failed operator component, a misaligned track, or a loop detector that has lost its signal due to soil movement under the cut.
Track and Foundation Work
Slide gates on Benbrook commercial properties sit on concrete pads that rise and fall with seasonal moisture changes in the underlying clay. When a pad settles unevenly, the gate drags, the rack and pinion drive strips, and the motor overheats trying to force the cycle. Our correction on a Benbrook commercial repair typically runs $200 – $500, including re-leveling the track and adjusting the drive rack.
On properties near Benbrook Lake and Winscott Road, we regularly see loop detectors cut into pavement that has shifted enough to break the saw-cut seal and let moisture reach the loop wire. That shows up as a gate that opens fine from the remote but refuses to auto-close, or a keypad entry point that drops out mid-cycle. Resetting and re-sealing a loop detector cut in this area runs $150 – $350.
Operator and Access Control Diagnostics
Commercial operators in Benbrook are usually LiftMaster, BFT, or Linear units paired with a telephone entry or card reader. When a tenant calls saying the gate won’t respond, our first check is the operator’s current draw and the photo-eye alignment, then the access control wiring at the reader. Most Benbrook commercial diagnostic visits run $180 – $350 before any parts, always quoted in writing before we start.
Iron Gate Repair in Benbrook
Iron gate repair in Benbrook usually means a sagging panel, a hinge that has pulled free from the post, or rust that has eaten through the bottom rail. Benbrook’s older ranch-style homes commonly have ornamental iron gates on the original narrow driveway, and those gates see more stress per cycle than newer custom builds because the panel is often long and the support post was poured without a proper footing for today’s operator loads. A typical iron gate repair here runs $200 – $600 for sag correction, hinge replacement, or weld repair, with the final figure quoted in writing before any work begins.
hinge Post and Sag Correction
Iron gates on Benbrook properties are frequently installed on posts set shallow in clay soil. After a wet spring, the clay swells; after a dry August, it shrinks. The post tilts, the gate sags at the latch side, and the operator’s arm starts binding. We reset or reconstruct the post footing, correct the panel, and re-tension the operator so the gate cycles without dragging. Benbrook sag corrections with a new post footing typically run $450 – $900.
On a job off Winscott Road, our technician found a LiftMaster swing gate that had begun reversing halfway open. The real culprit was a wobbling hinge post that had lifted from clay movement, not the operator. We reset the post footing, performed sag correction on the panel, and re-aimed the safety photocell before running a full UL 325 reversal test. The gate has cycled cleanly since.
Rust Repair and Panel Welding
Benbrook’s humidity and the hard water from local irrigation systems accelerate rust on iron gate panels, especially at the bottom rail where sprinkler overspray lands. We cut out and replace rusted sections, weld new steel in, and prime and paint to match the existing finish. Weld and rust repair on an iron gate in Benbrook runs $150 – $450 depending on the length of the damaged rail, before painting.
Trusted Brands We Service in Benbrook
Our Benbrook technicians are factory-familiar with the operators you likely own. On swing gates, we service FAAC, BFT, and Mighty Mule systems daily. On slide gates, we work on Viking, Linear, and DoorKing. We carry common replacement boards, limit switches, remote receivers, and photocell kits for LiftMaster and Ghost Controls on our service vehicles, which means most Benbrook repairs happen on the first visit rather than after a parts order. If you have a less common brand or an older unit, we’ll source the part and give you a clear timeline before charging anything.
Common Gate Repair Problems We See in Benbrook Homes
- Hinge post lift from expansive clay. Benbrook’s soil swells in wet months and shrinks in dry months. That cyclical movement slowly works the hinge post out of plumb, and the gate starts binding or reversing before the panel has even lost its shape. We see this on both original ranch homes and newer builds along Mary’s Creek.
- Settled slide gate tracks. On Benbrook properties with concrete driveways poured over uncompacted clay, the pad under a slide gate track sinks by fractions of an inch each season. The gate then drags along the track and the drive motor pulls more amperage than it’s rated for, eventually failing the board or the capacitor.
- Photocell misalignment from ground movement. Safety edges and photo-eyes depend on the gate panel and the path remaining in precise alignment. When a Benbrook post shifts, the beam is broken mid-cycle, and the gate reverses as if something were in the way. It’s a safety feature doing its job, but the underlying cause is the shifted post, not the sensor.
- Narrow driveway geometry on original ranch homes. Many Benbrook driveways built in the 1970s and 1980s are narrower than modern standards. A swing gate operator mounted without accounting for that tighter arc will clip the fence or reverse before full open. We see this consistently on properties near Timberline Drive and along Winscott Road.
Pricing for Gate Repair in Benbrook, TX
Here are honest Benbrook price ranges, based on what we’ve actually charged on recent jobs in this city:
- Diagnostic visit: $75 – $150, applied to the repair if you proceed
- Limit switch or safety sensor replacement: $180 – $320
- Hinge post reset and sag correction: $450 – $900 depending on footing depth and panel size
- Slide gate track re-level and drive adjustment: $250 – $550
- Operator board or capacitor replacement: $280 – $650 for common brands
- Rust repair and welding on iron gates: $150 – $450 before painting
These are not estimates for another city. Benbrook’s clay soil and older housing stock mean certain repairs here take longer than they would in Fort Worth, where post footings are more predictable. We always give you a written price before any work starts, and that number is the number on the final invoice. Call (903) 417-0793 for a free estimate and we’ll talk through what your gate actually needs, no pressure.
We Also Serve Cities Near Benbrook
Our Benbrook crews cover the city and surrounding areas. If you’re in Fort Worth, Dallas, Houston, or San Antonio, we can often route a technician from our Dallas-Fort Worth dispatch office to your property. Same square-deal pricing applies: written quote first, live arrival time, and the 365-Day Done Right Promise on every repair.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Benbrook
In Benbrook, the most common cause of a mid-cycle reverse is a shifted hinge post pushing the gate out of alignment, which breaks the safety photocell beam and triggers the entrapment protection. The fix is a post reset and sag correction, not a new operator. Call (903) 417-0793 and we’ll diagnose it on site.
Yes. Every automatic gate in Benbrook must meet UL 325 safety standards, which include functioning photo-eyes, safety edges, and a reversal test that stops and reverses the gate when it contacts an obstruction. We run a full UL 325 test on every repair and installation, and we note the result on your invoice. If your gate lacks working entrapment protection, we’ll quote the needed safety devices before any other work.
No. New gate installations in Benbrook require measuring, ordering panels or operators, and often concrete footing work that must cure before the gate is hung. That process typically takes 2 – 4 weeks from measure to final UL 325 testing. What we do offer for repair calls is same-day or next-day dispatch, so if your current gate has failed and needs to be back in service now, call (903) 417-0793.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we carry common service parts for most of these brands on our Benbrook-dispatch trucks. If you have a different brand, we’ll source the part and give you a written price and timeline before ordering.
If the gate drags on the latch side but the panel itself is straight, you likely need a hinge post reset, which runs $450 – $900 in Benbrook. If the post is rusted through at the base or split, you need a new post and footing. Either way, we’ll show you the condition of the post before quoting, and the price is in writing before work starts. Call (903) 417-0793 for a free assessment.
Contact Calder Gate Repair in Benbrook
If your gate is failing, call Calder Gate Repair at (903) 417-0793 right now. You’ll speak to a live person, get a trackable arrival time, and receive a written quote before any repair begins. Every job includes the 365-Day Done Right Promise and a free second visit if the repair fails within the year. That’s how we work in Benbrook, and it’s how we’ve worked since 2009.
Written by Nico Alvarez, owner at Calder Gate Repair, part of the Relay Home Co. family serving Benbrook since 2009.