Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Roanoke
Gate repair in Roanoke usually means one of three things: a gate that won’t open, a gate that won’t close, or a gate that drags and sags until it finally gives out. Most jobs run $180 – $480 depending on whether it’s a hinge reset, an opener replacement, or a post footing repair. We dispatch technicians who know Roanoke’s neighborhoods, not just a map pin, and every call starts with a live person at (903) 417-0793. If your gate is stuck open, jammed shut, or making a grinding noise it didn’t make last week, call us now. We’ll give you a written price before any work begins.
Why Calder Gate Repair Is Roanoke’s Preferred Gate Repair Company
Roanoke homeowners call us because we answer the phone and we show up when we say we will. Calder Gate Repair is part of the Relay Home Co. family, founded in 2009, and our Roanoke customers get three things on every job: a written price before work starts, a written guarantee on the repair, and a free second visit if that repair fails within 365 days. We call it the 365-Day Done Right Promise. It’s not a slogan. It’s in writing on your invoice.
Our technicians are background-checked, uniformed, and dispatched with a live, trackable arrival time. You’ll know who’s coming and when they’ll pull up. No four-hour windows, no phone tag. Nico Alvarez leads our gate repair team, and he holds every technician to the Relay Visibility Guarantee: live arrival time, before-and-after photos, and a digital invoice you pay from a link. That level of transparency is rare in gate repair, and it’s why Roanoke homeowners keep our number saved.
We serve every corner of Roanoke, from Fairway Ranch to the neighborhoods along Hwy 114 and into the newer subdivisions offLitsey Road. When a gate fails in Roanoke, we’re typically on site the same day for repair calls. For installations and full opener replacements, we schedule a free measure and give you a written quote with a realistic timeline. If your gate is the only thing between your backyard and the street, waiting days isn’t acceptable. Neither is guessing at the price.
Wood Gate Repair in Roanoke
Wood Gate Repair in Roanoke is a frequent call for us because Roanoke’s expansive black clay works against wooden gates year-round. The clay swells when wet and shrinks in drought, which means wood posts heave, panels twist, and hinges pull loose. A gate that looked plumb in April can be dragging by August. Most wood gate repairs run $140 – $320 for hinge replacement, panel realignment, or post bracing. If the post itself has rotted or shifted, expect $350 – $650 to reset it on a proper concrete footing.
Post Reset and Realignment
We pull the post, dig past the clay layer, and set it deeper with concrete and gravel drainage. This is the fix that lasts. Realigning the panel comes after the post is solid, not before. Patching a gate onto a moving post just buys you a few months.
Hinge and Latch Replacement
Roanoke humidity and heat cycles loosen hardware faster than you’d think. We replace worn hinges and latches, and we check the gate’s weight distribution so the new hardware isn’t overloaded from day one. A sagging wood gate usually means the top hinge is doing all the work. That’s a quick diagnosis, and the fix is straightforward.
Driveway Gate Repair in Roanoke
Driveway Gate Repair in Roanoke means dealing with gates that get used dozens of times a day and rarely get maintained until something fails. Driveway gates take more cycles than any other gate on the property. That’s why a builder-grade opener in a newer Roanoke subdivision often dies within five to seven years. Basic driveway gate repairs run $200 – $450 for limit switch replacement, rack and pinion alignment, or safety sensor fixes. Full opener replacements typically run $750 – $1,400 depending on brand and gate weight.
Opener Replacement and Upgrades
If your LiftMaster, FAAC, BFT, or Viking opener is clicking but not moving, the control board or limit switch is a likely culprit. In some cases we can replace the failed component. In others, especially with builder-grade units, replacement makes more sense than repair. We’ll give you both options with written prices and let you decide.
Safety Sensor and Loop Detector Work
North Texas storms and yard work can knock photocells out of alignment or interfere with loop detectors. When a driveway gate reverses for no reason or won’t close at all, safety sensors are the first thing we check. We test every sensor and reversal system to UL 325 standards before we call the job done.
Trusted Brands We Service in Roanoke
Our technicians are factory-familiar with nine major gate opener brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Roanoke customers, that means we diagnose accurately and carry common parts for the brands most often installed in this area. Rather than ordering a part and hoping, we arrive prepared. If your opener is a FAAC or BFT, we likely have the limit switch or control board in the van. If it’s a Linear or Viking, same story. Fast turnaround, fewer return trips, and a written guarantee on every repair.
Common Gate Repair Problems We See in Roanoke Homes
- Hinge post heaving in expansive clay. Roanoke sits on heavy, shifting black clay that swells and shrinks with every rain and drought cycle. The post footing fails while the panel looks fine, which is why we inspect the post before touching the gate.
- Builder-grade openers failing early. Much of Roanoke’s housing is newer planned-community construction where gates are still on their original entry-level operators. Stripped rack and pinion gears or a burned-out control board are the most common failures.
- Safety photocells knocked out of alignment. After storms or yard work, the photocell beam drifts or gets blocked. A gate that stops and reverses without warning usually means a sensor issue, not a bad motor.
- Gate dragging or out of square. Wood gates absorb moisture and shift. A gate that scrapes the driveway or won’t latch is almost always a post or hinge problem, not a panel problem. Fixing the root cause keeps it from coming back in six months.
Pricing for Gate Repair in Roanoke, TX
Most gate opener repairs in Roanoke run $180 – $340 before parts. Hinge and post repairs run $140 – $320 for wood gates, $200 – $450 for driveway gate systems. Full opener replacements typically land between $750 – $1,400. Weld and rust repair on steel gates runs $150 – $400 depending on the extent of the corrosion. These are the price ranges we quote before work starts, and the number you agree to is the number on the invoice. Not a penny more. Call (903) 417-0793 for a free estimate. A real person answers 24/7.
On a recent call near the Fairway Ranch area, we found a sagging double swing gate whose hinge post had rocked loose in the clay, throwing both leaves out of alignment. We pulled the post, reset it on a proper concrete footing, corrected the sag, then tested the LiftMaster operator’s safety photocell and reversal before we left. The homeowner’s driveway gate now closes flush and the entrapment protection passes UL 325.
We Also Serve Cities Near Roanoke
Our Gate Repair team covers Roanoke and the surrounding North Texas communities. If you’re in Flower Mound, Southlake, Argyle, or Keller, we can dispatch a technician to your driveway too. Learn more about our Gate Repair in Roanoke coverage area, or call (903) 417-0793 to book a free estimate. Same team, same written pricing, same 365-Day Done Right Promise.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Roanoke
Because Roanoke’s expansive black clay is moving the post, not the panel. When the clay swells and shrinks through wet and dry seasons, shallow post footings heave and shift. The post leans, the gate sags, and no amount of panel work fixes it. The real repair is pulling the post, setting it deeper on concrete with proper drainage, and then realigning the gate. That’s the only way to stop the cycle. Call (903) 417-0793 and we’ll check the footing first.
Two things must be working: the safety photocell that detects obstructions, and the auto-reverse function that stops and reverses the gate when it hits resistance. We test both to UL 325 standards on every automatic gate repair. If either fails, the gate is unsafe, period. That’s a repair we flag immediately and fix before we leave.
Yes. We repair single and double swing gates, slide gates, and cantilever gates. Most Roanoke residential properties have swing gates, but we work on both styles. The failure points differ: swing gates wear hinges and posts, slide gates strain rollers and rack and pinion gears. Both are within our daily workload across Roanoke.
For repair calls, yes. If your gate is stuck, dragging, or won’t open, we can typically dispatch a technician to Roanoke the same day. Installations and full opener replacements are scheduled with a free measure and a written quote. Those take a bit more time to do correctly. Call (903) 417-0793 and a live person will tell you what today looks like.
The post footing. In Roanoke, expanding clay shifts posts more than anything else. If the post is solid, we move to the opener, limit switch, and safety sensors. If the post has moved, the opener may be fighting the misalignment and wearing itself out. We diagnose from the ground up so we’re fixing the cause, not the symptom.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family, serving Roanoke and surrounding North Texas communities.