Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hurst, TX
Hurst sits in the heart of the HEB area, and its homes were built largely between the 1950s and 1990s. That means most driveway gates here run on openers installed a decade or more ago, exposed to North Texas heat, spring storms, and soil that shifts with every wet-dry cycle. Calder Gate Repair handles gate repair in Hurst with written pricing before any work starts, and a live person answers when you call (903) 417-0793. We’re the dedicated gate specialist inside the Relay Home Co. family, and we know the brands on Hurst gates because we see them every week.
Why Hurst Homes Are Different
Hurst has a specific housing rhythm. Many properties sit on larger lots than in neighboring Bedford or North Richland Hills, with long driveways that favor slide gates with heavy steel frames. The summers here are brutal on electronics: opener control boards and capacitor units fail faster in sustained 95-plus degree heat, especially when mounted in unshaded boxes. The clay soil doesn’t help either. Hurst’s expansive clay swells after rain and contracts in drought, which slowly moves gate posts and puts tension on hinges, rollers, and limit switches – the small sensors that tell the gate when to stop. That combination of older openers, heavy gates, and moving ground is exactly what we prepare for on every Hurst job.
Parts of Hurst near Bellaire Drive and along Pipeline Road, including neighborhoods around Hurst Hills Elementary, were built in phases stretching from the 1960s into the 1980s. Gate hardware there varies from original chain-drive systems to retrofitted LiftMaster and Ghost Controls openers. Some subdivisions also maintain HOA standards for gate appearance and height, so when we quote a repair, we check what’s actually feasible before ordering parts. That’s part of the written-price promise: no surprises, and nothing ordered until you agree to the number.
Our Main Hurst Services
Hurst homeowners call about two things more than anything else: a gate that won’t open at all, and a gate that opens halfway and reverses. Those breakdowns usually trace back to the opener or the electric drive system. Both have dedicated pages linked below.
Gate Repair in Hurst
When a gate is off its rollers, sagging on hinges, or dragging across the driveway, the repair is mechanical before it’s electrical. In Hurst, we routinely find that the post holding a wrought iron gate has shifted just enough to bind the steel frame. The fix involves resetting hardware, sometimes welding a cracked joint, and re-aligning the track so the wheels roll clean. If the failure is a snapped chain or bent operator arm, we identify it quickly and give you the written price before turning a bolt. Our 365-Day Done Right Promise covers every mechanical repair: if it fails within a year, we return at no charge. Learn more about Gate Repair in Hurst.
Electric Gate Repair in Hurst
Electric gate failures in Hurst happen most often after lightning storms or extended heat. Power surges from spring thunderstorms take out control boards and transformers, while the summer sun bakes photo eyes and edge sensors mounted on dark metal surfaces. We diagnose the circuit first: incoming power, transformer, board, then switches. A bad limit switch in a Viking or Linear opener often mimics a motor failure, and testing it before replacing parts is the difference between a $200 repair and a $1,200 one. We test, quote, and fix with a written guarantee. See Electric Gate Repair in Hurst for details.
Gate Opener Repair in Hurst
Most opener failures in Hurst are not the motor. They’re the sensors, the control board, or the receiver that talks to your remote. DoorKing and LiftMaster openers are common across neighborhoods here, and we carry replacement boards for both. A gate that opens on its own or ignores the remote usually points to a failing receiver or crossed wiring from irrigation work. We recalibrate open and close limits, re-flash the board where needed, and test the full cycle before we leave. Every opener repair carries the free second visit if it fails within the 365-day window. Get the specifics on Gate Opener Repair in Hurst.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hurst
We’re factory-familiar with Linear, Viking, Ghost Controls, and DoorKing, to name the ones we see most often in Hurst driveways. Common replacement parts for those brands stay stocked in our Dallas-Fort Worth parts room, so most fixes don’t wait on shipping. If your specific part is not in stock, we quote the lead time in writing before you pay anything. Explore our brands.
Pricing for Gate Company in Hurst, TX
| Service | Typical range in Hurst |
|---|---|
| Diagnostic visit (applied to repair) | $49 – $95 |
| Gate opener circuit board replacement | $280 – $540 |
| Limit switch replacement | $155 – $265 |
| Photo eye or safety sensor replacement | $130 – $230 |
| Remote and receiver programming | $85 – $165 |
| Gate opener motor replacement | $380 – $780 |
| Hinge or roller replacement (mechanical) | $140 – $310 |
| Chain or belt replacement | $190 – $360 |
| Slide gate track realignment | $220 – $480 |
| Keypad or intercom repair | $110 – $230 |
| Complete opener swap (labor only) | $450 – $900 |
| Emergency after-hours callout | $90 – $175 add-on |
Prices in Hurst run slightly higher on properties with long double-wide gates, since heavier steel means the opener works harder and wear parts fail sooner. Soil movement on clay lots also adds alignment time to mechanical repairs. Every quote is written and agreed to before we start, and the invoice matches that number.
Neighborhoods We Serve in Hurst
We cover the full Hurst footprint: Bellaire, Parkview, Hurst Hills, Shady Oaks, and Wildwood. Standard response across the city runs same-day for repairs booked before 2 p.m., with afternoon slots for later calls. Trackable arrival times apply everywhere, including the neighborhoods that sit against the Tarrant County line to the north.
- Bellaire Park
- Hurst Hills
- Parkview
- Shady Oaks
- Wildwood
Service Area – Cities Near Hurst
Many Hurst homeowners also manage rental properties or family homes in the surrounding HEB area. We run routes to North Richland Hills, TX and Bedford, TX daily, with scheduled visits east to Haltom City, TX and west through Colleyville, TX. Same routing and live arrival tracking apply across the full service area.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hurst
Same-day visits are available when you call before 2 p.m., depending on parts. Emergency after-hours service carries a callout fee. Every appointment gets a live, trackable arrival time from the moment it’s scheduled. Call (903) 417-0793 to check today’s schedule.
Some do, especially for visible changes like painting, height, or fixture swaps. Straight repairs on existing gates rarely need approval, but we verify what’s required before starting any work that could trigger a covenant issue. We’ll flag it during the quote.
Yes. The number quoted on paper before work begins is the number on your final invoice. If we discover an additional problem mid-repair, we stop, explain what changed, and get your written approval before any unquoted work continues. You never open a surprise bill.
Both. Business gates near the Northeast Mall area and retail centers along Grapevine Highway run more cycles per day and wear opener components faster. We schedule commercial work around business hours and carry commercial-grade replacement boards for DoorKing and Linear barriers. Call (903) 417-0793 for a free estimate on a business gate.
If your Hurst gate needs attention today, call Calder Gate Repair at (903) 417-0793. A live person answers around the clock, and we’ll quote your repair in writing before any work starts. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office; crews serve Hurst locally with uniformed, background-checked technicians and the Relay Home Co. visibility guarantee on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hurst Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.