Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Los Angeles Homeowners Choose Ghost Controls Gate Repair
Ghost Controls gate repair in Los Angeles is one of our core specialties at Calder Gate Repair, and we also offer Ghost Controls service in Long Beach. We service the full line of Ghost Controls swing and slide operators, from backyard single-swing kits to long driveway dual-swing systems, and we stock the OEM-compatible boards, arms, and sensors that actually fail in Southern California’s marine layer and heat. As an independent Ghost Controls service provider, we’re not tied to any manufacturer’s dealer network, which means we repair what’s broken instead of pushing full replacements. Call (903) 417-0793 and a live person answers, day or night.
Why Trust Calder Gate Repair for Your Ghost Controls Gate Repair?
Ghost Controls operators are popular in Los Angeles for a reason: they’re DIY-friendly, solar-capable, and priced sensibly. But the same design choices that make them easy to install also create predictable failure points once they’ve been out in real weather for a few years. Our technicians have pulled apart enough Ghost Controls units across Los Angeles to know exactly what fails first, what’s worth repairing, and when a new board or arm is the honest call. Nico Alvarez, our owner and lead technician, grew up in East Los Angeles and spent weekends with his grandfather near Mariachi Plaza learning that anything mechanical could be fixed if you were patient enough. He’s spent nearly two decades in gate repair around Los Angeles County, and he’s the reason we diagnose intermittent electrical faults that other crews walk away from. We carry OEM-compatible Ghost Controls parts on the truck, and when a board is obsolete, we match a proven aftermarket equivalent to the motor, not the other way around. Every repair carries the 365-Day Done Right Promise: if the repair fails within a year, we return at no charge.
Common Ghost Controls Gate Repair Problems We Fix in Los Angeles
- Control board corrosion and water intrusion. Ghost Controls boards are sealed, but the marine-layer fog that rolls through Westside neighborhoods and the San Fernando Valley’s winter rain find their way in eventually. Corroded traces cause erratic opening, random reversals, or a completely dead operator. We test the board in place, and if it’s salvageable, we treat and reseal it. If not, a new board goes in with a proper environmental seal.
- Battery and solar charging failure. Ghost Controls solar kits, like the TS-series style single-swings, rely on consistent sun. Canyon shade in neighborhoods like Laurel Canyon or heavy June gloom near the coast starves the panel, and the battery never gets a full charge. The gate stalls mid-travel or reverses because voltage drops below the motor’s threshold. We replace the regulator, test the panel output, and swap in a fresh deep-cycle battery when needed.
- Limit switch drift and arm wear on swing kits. Heat cycling in Los Angeles summers expands and contracts the actuator arm components on TSS1 and TDS-series style kits. Over years, limit switches shift, and the gate stops short or slams at the end of travel. Worn roller bushings in the arm make a groaning sound before they fail. We reset limits, replace worn bushings, and align the arm so the gate closes cleanly.
- Wireless keypad and remote pairing drop-outs. Ghost Controls systems use rolling-code remotes and keypads. After a power surge, a nearby lightning strike in the hills, or a brownout, the receiver board loses its stored codes. We re-pair everything, and if the receiver has failed, we replace it and set up all remotes and keypads in one visit.
- Stripped actuator bushings from under-sized hinges. Many Ghost Controls DIY installs in Los Angeles used the original gate hinges, which weren’t rated for the added torque of an operator. The strain strips the actuator bushing or bends the linkage. We replace the bushing and recommend hinge upgrades if the hardware is undersized for the gate’s weight.
Ghost Controls Parts & Our Repair-vs-Repair Approach
When we open a Ghost Controls operator, we’re looking at the board, the actuator, the limit mechanism, and the power path. For boards and arms still in production, we use Ghost Controls OEM-compatible parts, which keeps your existing remotes and keypads working without reprogramming everything. For older boards that Ghost Controls no longer lists, we match aftermarket equivalents to the motor’s voltage and torque specs. We don’t gamble with mismatched electronics. The honest repair-versus-replace conversation happens when a Ghost Controls unit has been standing in salt air or direct sun for a decade and the frame has taken hits from delivery trucks. If a new operator is the smarter spend, we say so and show you numbers. Most Ghost Controls repairs in Los Angeles run $180 to $340 before parts, and we write the price down before touching a single bolt. Call (903) 417-0793 for an exact quote.
Our Ghost Controls Service Process – Step by Step
- 1
Diagnosis. We start by asking what the gate is doing: opens partially then reverses, won’t respond to the remote, makes a clicking noise. Nico’s rule is simple: “Tell me what it’s doing, and I’ll tell you what it’ll cost, before I touch anything.” We test voltage at the board, check the battery and regulator if you have solar, and inspect the limit switches and arm bushings.
- 2
Repair or part replacement. We replace the failed Ghost Controls board, actuator arm, regulator, battery, keypad, or receiver with OEM-compatible parts. Every parts swap is tested under load, not just on the bench.
- 3
Testing and adjustment. We cycle the gate through full open and close at least three times, reset limits and auto-close timing, and verify that the obstruction sensor stops and reverses the gate within Ghost Controls’ specified force settings. LA code requires contact and non-contact sensors on any automated gate serving a driveway.
- 4
Written warranty. Your invoice includes the 365-Day Done Right Promise in writing: if the repair fails within 365 days, we return at no charge. No second invoice, no argument, no fine print.
Ghost Controls Products We Service & Install in Los Angeles
We work on the Ghost Controls lines Los Angeles homeowners actually have: the Heavy-Duty Single Swing Kits (TSS1-style), Solar-Powered Single Swing Kits (TS-style) for off-grid gate posts, Heavy-Duty Dual Swing Kits (TDS2-style) for wider driveways, and Slide Gate Opener Kits (TSG-style) for chain-link and vinyl slides. We also install smart access add-ons: keypads, Bluetooth and Wi-Fi modules, and app-based entry that works without a handheld remote. We stock boards, arms, sensors, and remotes for these lines locally, which means less waiting on shipped parts. For a Ghost Controls opener on a gate in Studio City or Sherman Oaks, we can usually have the right board in hand the same day.
We Also Service These Brands
Calder Gate Repair is factory-familiar with nine major opener brands. If your property has a LiftMaster on the driveway and a Ghost Controls on the side gate, or a Mighty Mule at a rental unit and a DoorKing at the main entrance, one call covers all of them. We’re not tied to a single manufacturer’s parts chain.
FAQs – Ghost Controls Gate Repair Service in Los Angeles
No. We are an independent Ghost Controls service provider, not an authorized dealer or warranty station. That independence means we repair what’s broken, not what a manufacturer’s program tells us to replace. We use OEM-compatible Ghost Controls parts whenever possible, and the work we do carries our 365-Day Done Right Promise regardless of manufacturer authorization status.
For boards, arms, remotes, and sensors still in production, we use Ghost Controls OEM-compatible parts. For discontinued boards, we match a proven aftermarket equivalent to the motor’s voltage and torque specs. We’ll tell you which type of part is going into your gate before we install it, and why. Call (903) 417-0793 if you want to talk through your specific model.
Most Ghost Controls repairs in Los Angeles are completed in one visit, typically 60 to 90 minutes for a board swap, limit reset, or battery replacement. Dual-swing systems with multiple failed components or extensive rewiring can take longer. We’ll give you a time estimate on the phone and a trackable arrival window, not a vague four-hour range.
We service the Heavy-Duty Single Swing kits (TSS1-style), Solar-Powered Single Swing kits (TS-style), Heavy-Duty Dual Swing kits (TDS2-style), and Slide Gate Opener kits (TSG-style). If you have an older Ghost Controls label you can’t identify, text us a photo of the control board and we’ll match it from there.
If your Ghost Controls opener is still under the manufacturer’s warranty, service from an independent provider does not automatically void it. However, Ghost Controls’ warranty terms may require that repairs be performed with manufacturer-approved parts. We use OEM-compatible parts for current models specifically to keep warranty questions simple. If preserving a manufacturer’s warranty matters most to you, call (903) 417-0793 and we’ll walk through what your specific unit’s warranty covers before we open the housing.
Most Ghost Controls gate repairs in Los Angeles run $180 to $340 before parts, with comparable rates for Anaheim Ghost Controls service. A control board replacement typically lands in the $200 to $400 range including the part, while a full solar regulator and battery refresh runs $250 to $450 depending on battery capacity. A new actuator arm installed is usually $180 to $300. Every job gets a written price before any work starts, so the number on the invoice is the number you agreed to at the door. Call (903) 417-0793 for a free estimate on your specific Ghost Controls setup.
Book Your Ghost Controls Service in Los Angeles, CA
If your Ghost Controls gate is opening halfway, stalling in the marine layer, or dropping remote codes, call (903) 417-0793 right now. A live person answers 24/7, and we’ll give you a written price before any work starts. Calder Gate Repair is your independent Ghost Controls service team in Los Angeles and Ghost Controls repair in Santa Ana, backed by the 365-Day Done Right Promise.
Written by Nico Alvarez, Owner & Lead Technician at Calder Gate Repair, serving Los Angeles since 2009.