Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Ghost Controls Gate Repair in San Diego, CA | Calder Gate Repair
If your Ghost Controls gate opener is acting up anywhere across San Diego, our Gate Repair in San Diego team can usually be there the same day with a written diagnosis and an exact price before any work starts. Most Ghost Controls repairs run between $150 and $380 before parts, depending on whether we’re resetting limits, replacing a control board, or re-pairing remotes after a power cycling event. We’re Calder Gate Repair, an independent service provider, and we’ve repaired Ghost Controls solar and low-voltage operators across this county for years without being tied to the manufacturer. Call (903) 417-0793 and a live person answers.
Why San Diego Residents Choose Us for Ghost Controls Service
We work on Ghost Controls equipment every week, and we’ve learned which failure modes show up here more than anywhere else. Nico Alvarez, our owner and lead technician, spent years diagnosing intermittent electrical faults other crews walked away from before founding Calder Gate Repair inside the Relay Home Co. family in 2009. His rule is simple: “Tell me what it’s doing, and I’ll tell you what it’ll cost before I touch anything.” We follow that on every job across San Diego service area, because a customer who knows what’s wrong and what it’ll take to fix it makes a better call than one reading guesswork off an invoice.
We’re factory-familiar with Ghost Controls boards, arms, limits, remotes, keypads, and solar charging behavior. We’re not a manufacturer-authorized shop, and that matters in a good way: we tell you plainly when a Ghost Controls system is worth repairing and when it isn’t, without brand loyalty clouding the math. Every technician arrives background-checked and in uniform with a live, trackable arrival time, and every job carries our 365-Day Done Right Promise in writing. If a repair fails within a year, we return at no charge, free second visit included.
Common Ghost Controls Gate Repair Problems We Solve in San Diego
- Battery and solar-charge failures. San Diego’s marine layer and coastal fog keep solar panels damp and shaded for stretches of the day, especially in spots like Point Loma and Ocean Beach. Ghost Controls solar operators on those properties underperform, and owners find the gate stuck open or fully dead by mid-afternoon.
- Control board water intrusion. Ghost Controls control boxes mounted on west-facing fences or near sprinkler lines take on moisture over time. That causes erratic open/close cycles, phantom remote triggers, or a board that powers up sometimes and not others. We see this all over Clairemont and Mission Hills.
- Arm and limit-switch misalignment. San Diego’s canyon-rim and hillside driveways shift with winter rain and settling earth. When the grade changes across the gate opening, the Ghost Controls arm drifts out of geometry, and the gate reverses mid-travel or grinds against a limit it can’t reach.
- Remote and keypad pairing loss after power cycling. Brownouts are common inland during Santa Ana season, and a failing battery can reset the operator and wipe your remote programming. Owners in neighborhoods like Rancho Peñasquitos and Scripps Ranch often end up locked out with a gate that still looks like it should work.
- Motor and swing arm wear. Ghost Controls swing operators on sloped lots work harder every cycle. Over time the motor draws more current and trips the board’s protection circuit. We service the motor, replace the arm when geometry is shot, and reset the entire swing path so the gate doesn’t fight itself.
Ghost Controls Service in San Diego: What Local Conditions Mean for Your Equipment
Here’s what a flat-lot gate company in, say, Phoenix won’t understand about Ghost Controls operators in San Diego: because so much of this city’s housing sits on canyon-rim and hillside lots, the ground under your gate is never completely still. Winter rain in a neighborhood like Rancho Peñasquitos or Tierrasanta softens the soil just enough that driveway slabs and gate posts move a fraction of an inch, and that fraction throws off Ghost Controls limit cams and arm geometry. Your gate doesn’t need a new battery; it needs the limits re-set and the arm re-tensioned to the new grade by a technician trained in Electric Gate Repair - San Diego hillside conditions. We correct that before recommending any parts, because a well-adjusted Ghost Controls operator on a sloped San Diego driveway should cycle clean every time. If we show up and the problem is just drift, you pay for the adjustment, not a component you didn’t need.
Ghost Controls Models & Products We Service in San Diego
We service the full residential Ghost Controls line: TSS1 single swing kits, TDS2 dual swing kits, DTP1 dual gate operator kits with keypad and remote accessories, and the AXO heavy-duty solar swing sets you see on ranches and hillside properties east of the 15. Our parts approach is honest: we stock genuine Ghost Controls control boards, arms, limit switches, remotes, keypads, and solar/battery components for fast San Diego turnaround. We use quality aftermarket equivalents only where they match or beat OEM spec, like batteries and hardware, and we show you the difference before installing anything. Most Ghost Controls operators in good structural shape are repairable; we recommend replacement only when the arm, gearbox, and board have all reached end of life at the same time.
For broader Ghost Controls coverage, see our Ghost Controls sales & service page.
Ghost Controls Service Pricing in San Diego
Most Ghost Controls opener repairs in San Diego run $150 to $380 before parts, with control boards, arms, and solar components priced separately. A service call that turns out to be simple, like a limit reset or remote re-pair, lands at the lower end of that range. What drives the cost? Whether we’re replacing a $35 limit switch or a $220 control board, and whether your site requires trench work, weatherproofing, or re-running low-voltage wire. Every estimate is free and written down before we touch the opener, so the number you agree to is the number on the invoice. For exact pricing on your Ghost Controls system, call (903) 417-0793 and we’ll walk through what you’re seeing, no obligation.
Serving San Diego, CA - Our Local Coverage Area
We’re based in the San Diego area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in San Diego
That’s almost always a limit-switch or arm-geometry problem, especially on San Diego’s sloped driveways where settling shifts the gate path. We reset the limits and re-tension the arm so the opener knows where “open” and “closed” actually are. Call (903) 417-0793 for an exact quote, estimates are free.
In San Diego’s coastal fog, it’s usually both working below spec: the panel isn’t getting enough direct sun through the marine layer, and the battery never fully recovers. We test both under load and replace whichever has failed, then re-set the charging profile. Call (903) 417-0793 to schedule a battery and panel test.
Yes. Brownouts and battery resets frequently wipe Ghost Controls remote and keypad programming, even when the operator itself still runs. We re-pair everything and verify the gate cycles from every input before we leave. Call (903) 417-0793 for a same-day appointment.
We can often repair a water-damaged Ghost Controls control board if the corrosion is caught early, by drying, cleaning, and resealing the box. If the board traces are fried, we replace the board itself, not the whole opener. Call (903) 417-0793 and we’ll tell you which route makes sense after we see it.
We service Ghost Controls anywhere in San Diego County, and we also work on LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, Elite, and Mighty Mule. If you’ve got a Ghost Controls opener acting up, call (903) 417-0793 and we’ll get a tech to you.
Service Areas Near San Diego
We run Ghost Controls service calls across San Diego County: from coastal spots like Point Loma and Ocean Beach to inland communities like Rancho Peñasquitos, Clairemont, and Mission Hills. For our Texas coverage, see Ghost Controls service in Dallas and Ghost Controls service in Fort Worth. If you’re within San Diego’s metro, call (903) 417-0793 and we’ll route the nearest tech.
Book Your Ghost Controls Service in San Diego Today
Your Ghost Controls gate isn’t going to fix itself, and in San Diego it’ll probably pick a foggy morning to quit completely. Call (903) 417-0793 for a free estimate, a real arrival time you can track, and a written price that won’t change at the door.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving San Diego since 2009.





Before
After
Before
After
Before
After