Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lantana, TX
Calder Gate Repair is the gate company Lantana homeowners call when a driveway gate stops opening, a keypad goes dark, or an opener motor hums but nothing moves. Gate repair in Lantana runs into the same North Texas conditions everywhere else in Denton County does: clay soil that shifts with the seasons, summer heat that cooks exposed circuit boards, and HOA communities where a gate that’s stuck open is a real security problem, not a cosmetic one. We’re part of the Relay Home Co. family, founded in 2009, and every Lantana job gets a written price before we touch a single bolt. Call (903) 417-0793 and a live person answers, 24/7.
Why Lantana Homes Are Different
Lantana isn’t a typical North Texas subdivision. The master-planned community spans multiple villages – Larkspur, Bandera, Magnolia, and others – with hundreds of homes that include driveway gates on a meaningful share of properties. That’s different from older Denton neighborhoods where gates are an afterthought. Here, the gate is usually part of the original build or a thoughtful addition, and HOAs care about how it looks and whether it closes properly.
The soil matters too. Lantana sits on expansive clay that swells after spring rain and contracts hard in summer. Gate posts and the underground conduit running power to an opener shift with that cycle. We regularly see intermittent opener failures in Lantana that trace back to a wire pulling loose inside a conduit that shifted a half-inch since installation. The heat is the second local factor. July and August push exposed control boards past their operating range, and the most common failure we see in Lantana during a heat wave is a blown capacitor or a limit switch that’s drifted out of alignment – that’s the small sensor that tells the gate when to stop.
Our Main Lantana Services
Most Lantana calls start with one of three problems: a gate that won’t open, an electric gate that trips a breaker or stops mid-cycle, or an opener that clicks but doesn’t move the gate. Each has its own dedicated Lantana page below.
Gate Repair in Lantana
Gate repair covers the physical side: hinges, wheels, tracks, posts, and the gate itself. In Lantana, we see hinges sagging on heavy ornamental steel gates and post lean from the clay soil cycles. A gate that’s dragging on the ground puts strain on the opener and shortens its life. We straighten, reinforce, and re-hang gates so the opener isn’t fighting the gate every cycle. Most Lantana gate repairs are completed in a single visit. Gate Repair in Lantana
Electric Gate Repair in Lantana
Electric gate repair means the power side: the motor, the control board, the keypad, the loop detector buried in the driveway, and the wiring between them. Lantana’s newer construction means most systems are low-voltage and well-installed, but the clay soil and heat still take a toll on buried wire and exposed boards. We diagnose the circuit, not just the symptom, so the repair holds. Electric Gate Repair in Lantana
Gate Opener Repair in Lantana
Gate opener repair focuses on the operator itself – the box that does the pushing. Lantana homes carry a range of brands, including LiftMaster, Ghost Controls, and several Viking units we’re factory-familiar with. When an opener fails, we bench-test the board, check the limit settings, and replace or rebuild the drive components instead of instantly selling a full replacement. Gate Opener Repair in Lantana
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lantana
Our technicians train on nine leading gate opener brands, including Linear, Viking, Ghost Controls, and DoorKing. We keep common boards, remotes, and limit switches stocked on our trucks, so most Lantana repair jobs don’t wait on a parts order. Our brands page lists everything we carry.
Pricing for Gate Company in Lantana, TX
| Service | Typical range in Lantana |
|---|---|
| Gate opener repair | $180 – $340 before parts |
| Electric gate repair | $160 – $320 before parts |
| Gate hinge replacement | $120 – $280 |
| Limit switch adjustment | $80 – $180 |
| Keypad replacement | $90 – $210 |
| Remote programming | $60 – $120 |
| Loop detector replacement | $220 – $450 |
| Control board replacement | $250 – $520 before parts |
| Full gate opener installation | $850 – $1,800 |
What pushes a Lantana job toward the top of those ranges is usually access: a gate set far from the road, a breaker panel inside a finished garage, or a motor that requires a taller ladder. Whatever the number is, you’ll see it in writing and agree to it before we start. The invoice matches the quote, every time.
Neighborhoods We Serve in Lantana
We cover all of Lantana, from the original villages near the golf course to the newer builds on the north side of the community. Typical response time for most Lantana repair calls is same-day or next-morning, depending on how early in the day you call.
- Larkspur
- Bandera
- Magnolia
- Sandlin
- Garrison
Service Area – Cities Near Lantana
Our Lantana crews also cover nearby cities across the broader metro. You can find our Dallas, TX and Fort Worth, TX pages for more on those areas, along with our Houston, TX and San Antonio, FL service pages.
Serving Lantana, TX - Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lantana
Most Lantana jobs are scheduled same-day when you call before early afternoon. A live person answers around the clock and can book a crew with a trackable arrival time, not a four-hour window. Call (903) 417-0793 for the next available slot.
Yes, and it’s usually about appearance. Some Lantana HOAs require matching finishes or ask that visible hardware match the original. We work with those requirements every week and can confirm what’s needed before any work starts. Your quote is free.
We choose parts and mounting hardware rated for North Texas conditions – heat-tolerant boards, sealed connections, and post hardware that tolerates soil movement. Every job also carries the 365-Day Done Right Promise: if the repair fails within 365 days, Calder returns at no charge.
Need a gate company in Lantana that answers the phone and puts the price in writing first? Call Calder Gate Repair at (903) 417-0793 for a free estimate, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lantana Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.