Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Aldine, TX
Gate repair in Aldine, TX comes down to three things: moisture, metal fatigue from Houston-area humidity, and openers that get called on daily by families coming and going. Most gate repairs here run between $75 and $400 depending on what failed, and the common denominator is almost always a component that corroded or wore out faster than expected. Calder Gate Repair handles the full range: iron driveway gates, tubular steel gates, sliding gates, and the electric openers that drive them. Call (903) 417-0793 for a written quote before any work starts.
Why Aldine Homes Are Different
Aldine sits in the heavy-air band north of Houston, where summer humidity climbs and Gulf moisture settles on everything metal. Gate hardware here takes a beating that drier parts of Texas never see. Hinges rust from the inside out, circuit boards trap condensation, and opener arms bend under heat expansion on long steel gates. Homes in neighborhoods like Greenspoint, Inwood Forest, and the subdivisions along Airline Drive run a mix of 1970s – 1990s construction and newer builds, which means we regularly see older, heavier iron gates on properties that have shifted over time. That settling is the quiet killer: a gate that swung true in 1995 often drags on its post by now, which burns out motors and strips gears.
Clay soil is the other local factor. Aldine sits on expansive soils that swell after rain and shrink in dry spells, which moves gate posts a fraction of an inch at a time. Over a decade, that fraction becomes a sag. When we respond to an Aldine gate that won’t open or close, the first thing we check is whether the post has drifted and the gate is now fighting its own weight. That’s not a motor problem, it’s a local ground problem, and fixing it correctly on the first visit is what keeps the repair from repeating.
Our Main Aldine Services
Most Aldine homeowners call us for one of three issues: a gate that’s physically damaged or dragging, a gate whose electric drive won’t respond, or an opener that works intermittently. Each has its own Aldine page below, with local pricing and what to expect.
Gate Repair in Aldine
This is the mechanical side: sagging gates, rusted hinges, bent tracks, broken welds, and post alignment. On Aldine properties with clay soil and older iron gates, post drift and hinge wear are the two failures we see most. We quote the repair in writing before work starts, including the hardware we’ll use. Gate Repair in Aldine
Electric Gate Repair in Aldine
This covers the electrical path from the breaker to the motor: wiring, safety loops, photo eyes, keypads, and the control board itself. Humidity in Aldine accelerates corrosion at terminal connections, especially on boards mounted in unsealed enclosures. A board that reads “dead” is often a corroded terminal block, which is a faster and cheaper fix than board replacement. Electric Gate Repair in Aldine
Gate Opener Repair in Aldine
When the motor runs but the gate doesn’t move, or it starts and stalls halfway, the opener unit is usually the culprit: stripped gears, worn limit switches, failed capacitors, or broken drive belts. We stock common parts for the brands Aldine homeowners actually own, which shortens most opener repairs to a single visit. Gate Opener Repair in Aldine
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aldine
We’re factory-familiar with nine major opener brands. In Aldine we most often see FAAC, Linear, BFT, and Viking on residential driveway gates. Common parts for these are stocked in our Houston shop, so a typical Aldine opener repair is done same-visit rather than wait-a-week. See our brands for the full line.
Pricing for Gate Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Gate hinge replacement | $75 – $150 |
| Gate wheel or roller replacement | $90 – $180 |
| Gate latch repair | $80 – $150 |
| Gate post adjustment (minor) | $120 – $250 |
| Gate opener circuit board repair | $150 – $350 |
| Limit switch replacement | $100 – $200 |
| Gate opener gear replacement | $220 – $450 |
| Gate opener arm replacement | $200 – $500 |
| Full gate opener swap-out | $400 – $900 |
In Aldine, two things push prices toward the upper end of those ranges: gates that have sagged from years of clay-soil post drift, which adds alignment labor, and opener enclosures that need resealing against humidity. Whatever the number turns out to be, you get it in writing before a single bolt is touched. The price you agree to at the door is the price on the invoice.
Neighborhoods We Serve in Aldine
Our Aldine crews cover the full area, from the residential streets off Airline Drive to the subdivisions along Aldine Mail Route and the pockets near Greenspoint and Inwood Forest. Typical response time across Aldine is same-day or next-morning for emergency repairs.
- Greenspoint
- Inwood Forest
- Westfield
- East Aldine
- Northside
Service Area – Cities Near Aldine
While this page focuses on Aldine, our crews also cover communities throughout the region. We handle gate repairs in Houston, TX, the metro hub just south of Aldine, as well as Dallas, TX and Fort Worth, TX to the north. For Florida clients, we serve San Antonio, FL through our network coverage.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aldine
Same-day or next-morning for most Aldine calls, depending on the time you phone in. We coordinate dispatch from our Houston office with crews already working the Aldine area, so we’re not routing across town. Call (903) 417-0793 for a live arrival window.
Gate repairs that replace or restore existing hardware generally don’t require permits. If an HOA governs your subdivision, we recommend checking their fence and gate guidelines, especially for full opener replacements that change appearance. We’ll note any HOA concerns during the written quote.
Most repeat gate failures in Aldine trace back to post drift from expansive clay soil. If the post moved, the gate fights its own weight and any opener repair is temporary. We check post alignment on every job so we’re fixing the cause, not redoing the symptom.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Quote came in the app before the visit. No surprise at the end."
- Ginny L.