Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Aldine
Gate repair in Aldine usually comes down to one of two things: a gate that won’t move, or a gate that won’t stop. When your opener quits on a Saturday morning or your swing gate starts dragging across the concrete, you need someone who answers the phone and shows up with a real arrival time. Calder Gate Repair serves every corner of Aldine, from the neighborhoods off Aldine Westfield Road to the acreage lots along the Hardy Toll Road corridor. We dispatch background-checked, uniformed technicians with a live, trackable ETA, and every job starts with a written price before a single bolt is turned. Call (903) 417-0793 and you’ll talk to a live person, not a voicemail tree.
Why Calder Gate Repair Is Aldine’s Preferred Gate Repair Company
Aldine isn’t a dense subdivision grid. It’s a patchwork of unincorporated Harris County parcels, older ranch-style homes on big lots, and newer gated entries on long driveway runs. That changes how gates fail here, and it changes how they need to be fixed. Our Gate Repair crew knows the difference between a dead operator board and voltage drop on a 150-foot control wire run, because we see both every week in Aldine.
We’re part of the Relay Home Co. family, established 2009. Each location operates independently, but every Aldine customer gets the same three written guarantees: a written price before any work starts, a written guarantee on every repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window. Our techs are factory-familiar with FAAC, BFT, Linear, and Viking operators, plus five other major brands. Nico Alvarez leads the team, and he holds every job to the Relay Standard: live arrival time, before-and-after photos, and a digital invoice you pay from a link.
Wrought Iron Gate Repair in Aldine
Wrought iron gate repair in Aldine is about more than the ornamental steel you see at the driveway entrance. It’s about the hinge posts, the sag correction, the weld points, and the operator that has to swing a 300-pound leaf smoothly for years. Aldine’s clay soil expands and contracts with every rain-dry cycle, and shallow post footings set years ago eventually shift. When the post tilts, the gate leaf sags, the latch stops aligning, and the operator starts fighting dead weight on every open and close cycle. We re-set the footing, true the leaf, and correct the sag so the motor isn’t working against gravity.
Hinge and Post Work
On wrought iron gates, the hinge post carries the entire swing load. When it shifts in Aldine’s gumbo clay, the gate scrapes the driveway, the lock won’t catch, and the opener’s limit switch gets confused about where full open actually is. We don’t just shim the hinge; we dig out the footing, set it deep, and anchor it for the soil this part of Harris County actually has.
Weld and Rust Repair
Houston humidity is unkind to iron. Aldine gates that sit under tree canopy along Little York Road or Hopper Road collect moisture faster than they dry. We grind out rust pockets, weld in new steel where sections have thinned, and re-coat the repair so it doesn’t fail again in two seasons. A typical wrought iron repair ranges from $220 to $550, depending on how much steel needs replacing.
Metal Gate Repair in Aldine
Metal gate repair in Aldine covers everything from aluminum drive gates to steel tube-frame gates on the newer gated properties east of I-45. Aluminum doesn’t rust, but it bends. Steel is strong, but it rusts. Aldine’s mix of older ranch homes and newer perimeter-fenced lots means we see both. The most common metal gate failure here is a gate leaf that’s drifted out of square, dragging on the ground at the latch side and binding at the hinge side. We realign the frame, replace worn hinge bushings, and get the gate traveling true before re-setting the operator’s open and close limits.
Gate Realignment
A metal gate that scrapes the driveway is usually a hinge problem, not a panel problem. On steel gates, the hinge barrels wear out; on aluminum gates, the frame flexes. We bring the gate back to square and re-check the operator’s travel settings so the motor isn’t stalling against a bound-up leaf. Typical realignment work in Aldine runs $180 to $340, parts included for standard hinge replacements.
Lock and Latch Repair
Manual latch plates, keypad locks, and magnetic locks all fail eventually. On a metal gate, a misaligned latch is usually the first sign the gate leaf has sagged. We fix the lock and the sag together, because fixing one without the other means the new lock gets destroyed the same way the old one did. Lock repairs generally run $95 to $210 in Aldine.
Trusted Brands We Service in Aldine
We stock replacement parts for the operators Aldine homeowners actually own. FAAC and BFT hydraulic operators are common on the larger estate lots near Aldine Mail Route, and they need different troubleshooting than the Linear and Viking units we see on smaller swing gates throughout the 77039 and 77037 ZIP codes. Our techs are factory-familiar with all four, plus LiftMaster, DoorKing, Ghost Controls, Elite, and Mighty Mule. When we roll up to an Aldine job, the parts we’re most likely to need are already on the truck. That means fewer return trips and a gate that’s working again in one visit.
Common Gate Repair Problems We See in Aldine Homes
- Voltage drop on long control-wire runs. Aldine lots are deep, and the operator often sits 100 feet or more from the house. Undersized wire starves the board, mimics a dead operator, and gets misdiagnosed as a motor failure all the time. We test voltage at the operator before recommending any replacement.
- Clay-soil hinge post shift. The gumbo clay around Aldine swells when it rains and shrinks when it’s dry. Shallow post footings tilt, the gate sags, and the operator fights the leaf on every cycle. Re-setting the post is the fix; adjusting the panel is a band-aid.
- Storm-season power flickers resetting the board. Thunderstorms rolling through north Harris County cause brownouts and power resets that scramble FAAC and LiftMaster limit settings. A gate that suddenly opens halfway or reverses for no reason right after a storm usually has corrupted travel limits, not a dead motor.
- Missing or non-working safety edges. UL 325 requires a working reversing mechanism (photocell or edge sensor) on every automatic gate. A lot of Aldine gates were installed years ago with a single photocell that’s since failed. We test and replace safety devices on every call, because a gate that won’t reverse when someone is in the swing path is a serious hazard.
Pricing for Gate Repair in Aldine, TX
Most gate repairs in Aldine land between $180 and $550 before parts. Here’s the honest breakdown: a service call with basic limit-switch adjustment and operator tuning runs $95 to $180. Hinge and post work runs $220 to $450, depending on the footing condition. Weld and rust repair runs $200 to $400 per section. A full operator replacement, including new control board and remotes, typically runs $650 to $1,400 installed, depending on brand and gate size. Every quote is written and agreed to before any work starts. The number on the invoice is the number you approved at the door. Call (903) 417-0793 for a free estimate, and we’ll give you a real price range for your specific gate before we even schedule the visit.
We Also Serve Cities Near Aldine
Our crews work throughout the north Houston metro, so if you’re in a neighboring community, we can help. We provide Gate Repair in Aldine and also serve Houston, San Antonio, Dallas, and Fort Worth. Same written pricing, same 365-Day Done Right Promise, same live person answering every call.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aldine
Straightening the panel without fixing the post is a temporary band-aid that fails again, usually within a few months. On most Aldine properties, the real issue is the hinge post footing shifting in the clay soil. We re-set the footing, correct the sag at the hinge point, and then re-align the panel. That’s the repair that lasts. Straightening alone would run maybe $150 to $250, but you’d be paying for it twice. Call (903) 417-0793 and we’ll give you an honest assessment.
No, and no honest gate company should. A proper automatic gate installation involves groundworks, a concrete footer for the posts, a low-voltage power run, safety edges, and reversal testing. That’s measured, ordered, and scheduled over days, not hours. What we do offer is a free measure and a written price for a full installation, so you know exactly what the project costs before anything is ordered. Call (903) 417-0793 to get the measure on the schedule.
On most Aldine lots, the problem is voltage drop on the low-voltage control wire running from the house to the gate. When the wire is undersized for a 100-foot run, the operator board sees low voltage and behaves like it’s dying: stalling mid-travel, not responding to remotes, resetting randomly. We test voltage at the operator terminals before blaming the board. Sometimes the fix is as simple as re-running the control wire in a heavier gauge. Call (903) 417-0793 and we’ll diagnose it properly.
We’re factory-familiar with nine major brands: FAAC, BFT, Linear, Viking, LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. FAAC and BFT are common on the larger Aldine estate lots; Linear and Viking show up on smaller swing gates throughout the 77039 area. We stock parts for all of them so the fix usually happens in one visit. Call (903) 417-0793 with your brand and model, and we’ll tell you what we can do.
Yes. UL 325 requires every automatic gate in the United States to have a working reversing mechanism: either a photocell that detects an obstruction in the gate’s path or a contact edge sensor that reverses the gate when it touches something. Many older Aldine gates have a single photocell that’s dirty, misaligned, or dead. That’s a code violation and a real safety hazard, especially if you have kids or pets. We test and replace safety devices on every service call. Call (903) 417-0793 and we’ll make sure your gate reverses when it should.
We were called to a home off Aldine Westfield Road where a LiftMaster swing gate had been stalling mid-travel for weeks. The homeowner had already swapped the battery and the keypad entry. Our tech found the real problem at the hinge post: the footing had shifted in the clay soil, the gate leaf was sagging, and the operator was fighting the dead weight the entire swing. We re-set the footing, corrected the sag, and re-ran the low-voltage line to the operator. The gate moved right after that, and it’s covered under our 365-Day Done Right Promise. If the repair fails within a year, we come back at no charge. That’s a written guarantee on every Aldine job.
Written by Nico Alvarez, Owner at Calder Gate Repair, part of the Relay Home Co. family.