Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Fort Worth?
Gate repair in Fort Worth typically runs $150 to $650, with most single-gate fixes landing around $220 to $385. A simple remote or sensor reset might be $95, while a full opener replacement with new arm hardware can climb past $1,100. The number you pay depends on the opener brand, the part that failed, and whether your gate is a swing or a slide.
We’re Calder Gate Repair, offering our Gate Repair services as the dedicated specialist inside the Relay Home Co. family, and we’ve been working on Fort Worth gates since we opened our doors. Every job comes with a written price before we start, so the number on the invoice is the number we agreed to at your gate.
Gate Repair Cost Breakdown (2026)
Here’s what Fort Worth homeowners are paying for the most common gate repairs this year:
| Repair Type | Typical Price Range | Notes |
|---|---|---|
| Remote / keypad reprogramming | $95 – $150 | Often same-day, no parts needed |
| Safety sensor replacement (photo-eye) | $140 – $240 | Common after hail or lawn equipment damage |
| Limit switch adjustment or replacement | $150 – $260 | Gate won’t stop where it should |
| Gate control board replacement | $280 – $520 | Brand-dependent; DoorKing boards sit at the top |
| Opener motor replacement (LiftMaster, Linear, Mighty Mule) | $480 – $950 | Includes new arm or chain hardware |
| Roller / hinge replacement (swing gates) | $180 – $360 | Priced per set; sagging gates usually need both |
| Track or chain repair (slide gates) | $220 – $480 | Debris and dirt are the usual culprits |
| Battery backup replacement | $180 – $340 | Ghost Controls and Mighty Mule solar units vary widely |
Parts cost is the biggest swing factor. A LiftMaster control board and a FAAC board for the same job can differ by $200 or more because the boards aren’t interchangeable and each brand prices components differently. Labor stays fairly steady across Fort Worth because the drive time and setup are similar no matter which side of town you’re on. Where it gets expensive is when a failed part took other parts down with it. A seized roller can chew through a hinge. A shorted board can fry a sensor. We check the whole system before quoting so you’re not paying twice.
What Affects Gate Repair Pricing in Fort Worth
- Opener brand and model. We’re factory-familiar with nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A common LiftMaster arm is quick to source. A discontinued DoorKing board for an older commercial-grade gate takes more digging, and that shows up in the price.
- Swing vs. slide. Swing gates lean on hinges and rollers, which wear out from weight and Texas heat. Slide gates ride a track, and here in Fort Worth that track collects caliche dust and grass clippings. Slide gate repairs often cost $40 to $80 more because clearing and realigning the track takes longer.
- Weather and soil. Fort Worth sits on expansive clay soil that swells after spring rain and shrinks hard in July. Posts shift. Gates that were perfectly aligned in March can drag by August. That movement is behind a good share of the misalignment and limit-switch calls we get in neighborhoods like Tanglewood and Wedgwood.
- Gate material and weight. A 10-foot aluminum gate and a 16-foot steel gate put very different loads on the same opener. When the gate outgrew the opener, we sometimes find a homeowner paying for a repair that won’t hold until the opener is upgraded. We’ll tell you that straight instead of taking the repair fee.
- Age of the system. If your opener is past 12 to 15 years, replacement parts get scarce and less reliable. Repair is still often the right call, but we’ll be honest when a $400 repair on a 16-year-old unit is money you won’t get back.
- Access and gate size. A double commercial-style gate with a concrete pad and tight clearance takes longer to service than a single residential gate with an open driveway. Expect that difference to show up as a modest labor adder, not a surprise.
Repair or Replace? A Quick Rule of Thumb
If the repair costs less than half of a new opener and your unit is under 12 years old, repair usually wins. If the estimate is more than 60% of replacement cost, or the unit is already past 15 years and parts are getting hard to source, replacement is the better spend. We give you both numbers in writing before you decide, so it’s your call, not ours.
How to Save on Gate Repair
The single biggest saver is catching problems early. A gate that hesitates, jerks, or reverses on its own is telling you something. Fixing a $150 limit switch now beats a $600 motor replacement in six months.
- Clear the track and hinges. On a slide gate, sweep the track and clear debris. On a swing gate, check that hinges move freely. This is the one thing you can safely do yourself.
- Test your safety sensors monthly. Wave an object through the photo-eye beam. If the gate doesn’t reverse, call us before it becomes a bigger problem.
- Don’t ignore a slow gate. A gate that’s gotten sluggish over a few months is usually a battery or motor issue building up, not normal aging.
- Get a written price before work starts. Every Calder job includes this, always, never optional. It’s the easiest way to avoid a surprise invoice.
- Fix it once. Our 365-Day Done Right Promise covers every repair we make: if it fails within 365 days, we come back at no charge. That free second visit is included, not an add-on.
Free estimates are standard at Calder. Call (903) 417-0793 and we’ll talk through what’s happening with your gate before anyone comes out.
Why Fort Worth Homeowners Call Calder Gate Repair
We built Calder to fix the two things that frustrate people most about gate repair: not knowing when someone will show up, and not knowing what it’ll cost until the invoice. Every Calder tech is background-checked, arrives in uniform, and comes with a live, trackable arrival time. Not a four-hour window. A real time you can watch.
A live person answers every call, 24/7, and can book, update, or walk you through a quick troubleshoot on the spot. We’re independently owned within the Relay Home Co. network, and we follow The Relay Standard on every job: live arrival time, before-and-after photos, and a digital invoice you pay straight from a link.
If you’re comparing us against whoever shows up first on a search, go ahead and see who we are before you book. We’d rather earn the job than pressure you into it.
The 365-Day Done Right Promise, Explained
Here’s exactly what it covers: if a repair we made fails within 365 days, we come back at no charge. No diagnostic fee, no “that’s a different problem” runaround. If it’s our work, we own it. That promise is in writing on every single job.
FAQs – Gate Repair Cost in Fort Worth
How much does gate repair cost in Fort Worth?
Most Fort Worth gate repairs run $150 to $650, with the average job around $220 to $385. Simple fixes like remote reprogramming start near $95, and full opener replacements with new hardware run $480 to $950. For Houston pricing, see How Much Does Gate Repair Cost in Houston, TX? (2026 Price Guide). Call (903) 417-0793 for an exact quote, estimates are free.
Is it cheaper to repair or replace a gate opener?
Repair is cheaper when the fix is under half the cost of a new unit and your opener is under 12 years old. Past 15 years, with parts getting scarce, replacement usually saves money long-term. We give you both numbers in writing and let you decide. Call (903) 417-0793 to get both quotes.
Can you come today?
Same-day service is common for Fort Worth gate calls, especially for safety sensor, remote, and limit switch issues. We dispatch with a live arrival time you can track, not a four-hour window. Curious about Jacksonville rates? Check How Much Does Gate Repair Cost in Jacksonville, FL? (2026 Price Guide). Call (903) 417-0793 and we’ll tell you exactly when we can be there.
Do you charge for the estimate?
No. Estimates are free, and every job comes with a written price before any work starts. The number you agree to at the gate is the number on your invoice. Call (903) 417-0793 to book your free estimate.
Do you work on my gate opener brand?
Probably yes. We’re trained on nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers nearly every residential opener in Fort Worth. If you’re not sure what you have, call (903) 417-0793 and we’ll help you figure it out.
What if the repair fails after you leave?
Then we come back, free. Our 365-Day Done Right Promise means if a repair fails within 365 days, we return at no charge. It’s in writing on every job, not a verbal handshake. Call (903) 417-0793 if you need to schedule a return visit.
What a Calder Visit Looks Like
You call, a live person answers, and we book you with a real arrival time. The tech shows up in uniform, diagnoses the gate, and hands you a written price before touching a bolt. If you approve, we do the work, take before-and-after photos, and send a digital invoice you pay from a link. If the repair fails within 365 days, we’re back at no charge.
That’s it. No vague promises, no surprise line items, no phone tag.
Ready to get your gate working right? Call Calder Gate Repair at (903) 417-0793 for a free estimate. Live person, every call, 24/7.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Fort Worth since 2009.
Pricing reflects the Fort Worth market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
What Our Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.