Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Highland Park
Gate repair in Highland Park usually costs $240 – $680 depending on whether we’re fixing a sagging leaf, a failed opener, or a shifted hinge post. Most repairs take two to four hours on site, and we quote the exact price before any work starts. If your gate won’t open, drags on the driveway, or makes a grinding sound when the arm cycles, call Calder Gate Repair at (903) 417-0793. We know the streets, the estate parcels, and the masonry that makes Highland Park gates different from everywhere else.
We dispatch local crews from our Dallas-Fort Worth office, and we work on gates along Preston Road, Lakeside Drive, Armstrong Parkway, and the smaller lanes off Beverly. You’ll get a live arrival time you can track, a written price before the first bolt turns, and a real person on the phone when you call.
Key Takeaways
- Gate repair in Highland Park typically runs $240 – $680, with most jobs finished same day.
- Written price before work starts, every time – the invoice matches the quote.
- 365-Day Done Right Promise on every repair: if it fails within a year, we return free.
- Factory-familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Why Calder Gate Repair Is Highland Park’s Preferred Gate Repair Company
Highland Park homeowners don’t have time for vague four-hour arrival windows or a quote that changes at the door. Calder Gate Repair, part of the Relay Home Co. family since 2009, runs every job through the Relay Visibility Guarantee: you see who’s coming, when they’ll arrive, and what the job costs before we begin. Background-checked, uniformed technicians arrive with the right parts in the van because we stock motors, control boards, hinges, and safety edges for the brands common on older Highland Park drives.
We’ve rebuilt operators on estate gates near Lakeside Park, re-hung wrought iron on Armstrong Parkway, and pulled rusted post hardware off driveways near the Dallas Country Club. Nico Alvarez leads our crew with a simple rule: diagnose first, quote second, and never start a bolt until the number is on paper. That’s why our repeat calls from Highland Park neighbors keep our calendar full.
Calls are answered by a live person 24/7 – not a voicemail, not a bot. When your gate is stuck open at 6 a.m. or won’t latch at 11 p.m., you reach a human who can book a repair or troubleshoot the opener on the spot.
Wrought Iron Gate Repair in Highland Park
Wrought Iron Gate Repair in Highland Park almost always comes back to the masonry. Older estates here have original brick or stone pier walls at the driveway mouth, and the gate’s weight was never meant to hang off those piers for 40 or 50 years without attention. We see hinge lag bolts pulling out of brick, top hinges spreading under the weight of a full-height iron leaf, and bottom pivot pins grinding into stone. The fix isn’t a quick weld – it’s re-anchoring the hinge post into the pier, re-setting the leaf so it swings true, and often replacing bent hinge barrels at the same time.
Most wrought iron repairs in Highland Park run $300 – $650 before parts, and that includes grinding off the old hinge, re-hanging the leaf, and adjusting the opener so the arm isn’t fighting a misaligned gate. A new wrought iron hinge set, depending on size, adds $40 – $120 per hinge.
Hinge and Post Re-anchoring
When a hinge post has shifted inside a masonry pier, the leaf drops and the opener starts dragging it across the driveway. We drill out the old fasteners, set new anchors into the brick or stone, and re-hang the leaf level. On a Lakeside Drive property, a wrought iron swing gate had dropped and was dragging; our tech found the hinge post footing had shifted and the LiftMaster operator arm was straining. We reset the post footing, re-hung the gate leaf, and re-ran the loop detector and safety photocell, then tested reversing per UL 325.
Highland Park’s brick piers are load-bearing in ways a standard steel post isn’t. Anchoring into them correctly keeps the gate from sagging again in six months.
Welding and Rust Repair
Highland Park’s summer heat and the occasional Texas downpour work on iron gates year-round. We see rust thinning the bottom rail, cracking at weld points, and scrollwork snapping where the gate flexes against the opener. Calder welds with the gate in place or the leaf removed, then primes and paints the repaired section to match the existing finish. Expect $180 – $400 for a typical weld and rust repair, depending on how much of the rail needs cutting out.
Metal Gate Repair in Highland Park
Metal Gate Repair in Highland Park covers slide gates, aluminum driveway gates, and steel pedestrian gates – and the job usually splits into two parts: the metal structure and the operator. Aluminum gates on newer Highland Park properties develop loose powder-coat seams and bent top rails when the gate gets knocked or the opener binds. Steel slide gates get rust at the track line and roller brackets that wear oval. None of these are cosmetic; they stress the opener until the gears or the control board fail.
A typical metal gate repair in Highland Park runs $220 – $550 before parts. Realigning a slide gate and replacing worn rollers usually lands at the lower end. Straightening a bent aluminum leaf and re-riveting the top rail sits mid-range. Cutting out rusted steel and welding in new sections on an older estate gate goes higher.
Gate Realignment and Track Work
Slide gates on long Highland Park driveways are prone to track spread and roller wear because the gate runs dozens of times a day. We check the track in three spots along its length, shim where the stone or concrete has settled, and replace rollers that have gone oval. A gate that grinds or shudders at the halfway point usually has a track problem, not an operator problem.
Opener Arm and Mounting Repairs
When a metal gate is out of alignment, the opener arm takes the abuse. We see bent piston arms, stripped mounting bolts, and cracked bracket plates on the operator itself. Replacing the arm and bracket is quick – usually under an hour – and it’s done while the gate is still on the track. Cost runs $150 – $300 before parts.
Trusted Brands We Service in Highland Park
We stock parts locally for LiftMaster and FAAC operators on Highland Park service trucks, because those two brands cover most slide and swing gates in this neighborhood. We’re also factory-familiar with BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means when a FAAC control board fails on an Armstrong Parkway driveway, we don’t order a generic replacement and hope it fits – we carry the right board and swap it same day. Linear and BFT openers on older Highland Park pedestrian gates are common enough that we keep actuators and limit switches ready on the van.
Common Gate Repair Problems We See in Highland Park Homes
- Gate leaf sag at the masonry pier or hinge post. Older Highland Park driveways were built with brick or stone piers, and when the post inside them shifts, the leaf drops and drags. This pulls the opener arm out of alignment and wears the gears faster than normal cycling ever would.
- Control board and operator faults from power issues. Long driveway runs off the main house panel are common in Highland Park, and voltage drop or a surge after a storm takes out control boards before most mechanical parts fail. We check the circuit and the board together, not just the motor.
- Photocell and edge sensor failures after storms or hedge work. Safety sensors don’t just stop working – they get knocked out of alignment by debris, or cut by hedge trimmers along the driveway. When the gate refuses to close or reverses for no reason, the photocell is usually the first thing we test.
- Slide gate track wear from heavy daily cycling. Highland Park gates run constantly, and the track rollers wear oval over time. A gate that shudders at mid-travel is telling you the track or rollers are worn, not that the motor is weak.
Pricing for Gate Repair in Highland Park, TX
Most gate opener repairs in Highland Park run $240 – $480 before parts. A basic limit switch replacement – the small sensor that tells the gate when to stop – runs $240 – $320. Control board replacement on a FAAC, BFT, or LiftMaster opener runs $380 – $600 depending on the board. Hinge post re-anchoring into a masonry pier runs $300 – $650. Full gate realignment, including roller replacement and track shimming, runs $220 – $450.
Factors that move the price: how far the hinge post has shifted, whether we need to weld, whether the driveway gate is a single leaf or a pair, and how much of the opener arm has to be replaced. Every quote is written and agreed before work starts – the invoice matches the number we gave you at the door. Call (903) 417-0793 for a free estimate. The calibrations, safety tests, and documentation are included.
We Also Serve Cities Near Highland Park
If your gate is on the other side of the Metroplex, we run Gate Repair crews into Dallas, Fort Worth, Houston, and San Antonio. For everything local, rely on our Highland Park team.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Highland Park
Most shifted hinge post repairs in Highland Park take four to six hours on site. Removing the old fasteners, re-setting the post footing into the masonry pier, re-hanging the leaf, and re-running the safety tests takes a full morning. If we’re welding new hinge plates, add an hour. Call (903) 417-0793 and we’ll give you a written time estimate along with the price.
Yes. LiftMaster and FAAC are the two slide gate brands we see most on Highland Park driveways, and we stock control boards, limits, and motors for both on local service trucks. If your FAAC board failed after a storm or your LiftMaster is reversing off the safety photocell, we can usually diagnose and fix it in the same visit.
A proper installation includes anchoring the operator to the masonry pier or a new concrete pad, running 120V power from the main panel to the gate (or installing a solar panel and battery bank where line power isn’t practical), mounting the safety photocells and entrapment edges, and running a UL 325 reversal test. Highland Park’s brick pier walls change the anchor method – we don’t bolt directly into face brick; we set through-anchors into the pier core. Installation takes one to two days, never same day.
The operator is still running because its arm is absorbing the sag. The gate leaf drops when the hinge post shifts inside the masonry pier or the hinge barrels wear oval on the weight. The motor keeps cycling, but the arm is grinding against a misaligned gate, which accelerates wear until the gears fail. Fix the hinge post first, then re-align the operator.
Yes, we install and repair solar gate openers throughout Highland Park. Solar is a good fit for driveway gates that sit far from the house panel, and we can match a solar kit to LiftMaster, FAAC, BFT, or Mighty Mule operators. We size the panel to the gate’s daily cycle count and install the battery with a controller that runs the opener on cloudy weeks. Call (903) 417-0793 for a free site check, even if the gate already has solar.
Call Calder Gate Repair for Gate Repair in Highland Park
A gate that won’t open is a locked-out morning. A gate that won’t close is a security hole. Highland Park homeowners deserve both: a gate that cycles every time and a price they see before the work starts. Calder Gate Repair puts every estimate in writing, backs every repair with the 365-Day Done Right Promise, and sends a background-checked, uniformed technician with a live arrival time. Call (903) 417-0793 now, or book from your phone, and we’ll get your gate working the way it should.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Highland Park since 2009.