Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Highland Park, TX
When a gate stops opening in Highland Park, you need a fix fast – and you need to know what it will cost before a truck rolls up. Calder Gate Repair handles gate repair, electric gate repair, and gate opener repair across Highland Park, TX, with written pricing agreed before any work starts. Most Highland Park calls we take involve iron driveway gates on Preston Road estates or aluminum pedestrian gates on smaller lots near Armstrong Parkway, and the failure is usually in the opener, not the gate itself. Call (903) 417-0793 and a live person answers, 24/7.
Why Highland Park Homes Are Different
Highland Park gates sit on properties that were built to last – and built decades ago. The housing stock here runs heavily toward 1920s-to-1960s construction, which means gate posts were often set in original clay-heavy soil and opener wiring was run through conduit that predates modern insulation standards. North Texas heat does the rest. Summer afternoons routinely push 100°F, and opener circuit boards, limit switches (the small sensors that tell the gate when to stop), and capacitor banks fail faster here than in milder climates. We also see more wrought-iron gate leaf sag on Highland Park driveways than in newer developments, simply because the hinges and mounting plates have been carrying weight for 40 or 50 years.
Terrain matters too. Most Highland Park streets slope gently toward Turtle Creek on the eastern edge, which means a gate that sits slightly off-level will bind sooner – the wheels drag, the motor strains, and the opener’s thermal overload starts tripping. HOAs in the area, including those along Beverly Drive and Lakeside Drive, often require that gate hardware match the original design, so we default to repair-before-replace and keep a range of retrofit brackets and matching finishes stocked. Permits for opener swaps are generally not required inside Highland Park town limits for like-for-like replacements, but we confirm that with the town before pulling wire.
Our Main Highland Park Services
Highland Park homeowners call us most about two things: a gate that won’t budge, and an opener that runs but won’t move the gate. Each service has its own Highland Park page with full pricing and details.
Gate Repair in Highland Park
A sagging iron gate on a Beverly Drive driveway or a binding aluminum gate near the Dallas Country Club usually comes down to hinges, mounting posts, or the gate leaf itself. We assess the hinge load, check post plumb, and quote the repair in writing before touching a bolt. On heavier Highland Park iron gates, we often recommend replacing the original hinges with sealed bearing hinges – the same look, far less friction – and we cut and re-weld mounting plates on site when the post has shifted over decades. Gate Repair in Highland Park covers the full scope and pricing.
Electric Gate Repair in Highland Park
When the gate gets power but won’t move, the problem is usually in the low-voltage side: a burned limit switch, a failed capacitor, a corroded connection, or a control board that baked in the July heat. We diagnose the circuit first, show you exactly which part failed, and quote the repair before ordering anything. Highland Park homes with older buried conduit often have nicked insulation from root growth around mature oaks – we trace those shorts with a tone generator rather than digging trenches blindly. Electric Gate Repair in Highland Park has the detailed breakdowns.
Gate Opener Repair in Highland Park
Opener failures split into mechanical (stripped gears, worn drive belts, seized trolleys) and electronic (board faults, remote receiver issues, safety sensor misalignment). We carry boards and gears for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most Highland Park opener jobs are diagnosed and repaired in the same visit. If your opener is past saving, we’ll quote a replacement that fits the existing mount – no repainting, no new concrete pad unless absolutely necessary. Gate Opener Repair in Highland Park covers opener-specific pricing and symptoms.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highland Park
We’re factory-familiar with nine major opener brands, and in Highland Park we see a lot of FAAC and BFT hydraulic units on older estate gates, plus Linear and Viking on newer residential installs. Common boards, gears, and remotes are stocked in our Dallas-Fort Worth parts cage, so most repairs don’t wait on shipping. See our brands for the full list.
Pricing for Gate Company in Highland Park, TX
| Service | Typical range in Highland Park |
|---|---|
| Service call / diagnostic fee | $60 – $90, credited toward the repair |
| Gate hinge replacement (per hinge) | $80 – $150 |
| Gate wheel replacement (per wheel) | $65 – $120 |
| Gate post reinforcement | $180 – $320 |
| Gate opener circuit board replacement | $180 – $320 |
| Limit switch replacement | $110 – $190 |
| Capacitor replacement | $70 – $130 |
| Remote / keypad programming | $50 – $90 |
| Safety sensor replacement (per pair) | $90 – $170 |
| Full gate opener replacement (labor only) | $400 – $800 |
Heavy iron gates on oversized Highland Park driveways push labor higher than a standard aluminum pedestrian gate, because the team is often working with 400-plus-pound leaves and posts that have shifted over decades. Whatever the number, you see it in writing before we start – the invoice matches the quote, every time.
Neighborhoods We Serve in Highland Park
We work throughout Highland Park, from the larger estate lots near Lakeside Drive and Armstrong Parkway to the tighter streets around the Dallas Country Club. Our typical response window for non-emergency calls in Highland Park is same-day or next-day, and emergency calls are dispatched as soon as a tech is free. Neighborhoods we regularly serve include:
- Beverly Drive area
- Lakeside Drive area
- Armstrong Parkway corridor
- Preston Road estates
- Streets around the Dallas Country Club
Service Area – Cities Near Highland Park
If you’re outside Highland Park, we also cover nearby cities across the metro. See our gate company pages for Dallas, TX, Fort Worth, TX, Houston, TX, and San Antonio, FL for local pricing and dispatch details in those areas.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland Park
Most non-emergency calls in Highland Park are same-day or next-day. Emergency calls – a gate stuck open, a gate that won’t close, or a security gate that’s jammed – get dispatched as soon as a tech is free, and you’ll have a live, trackable arrival time rather than a four-hour window. Call (903) 417-0793 for a real ETA.
For like-for-like repairs, generally no – replacing hinges, boards, wheels, or openers that match the existing hardware doesn’t trigger Highland Park HOA review. If a full gate replacement or a visible finish change is needed, your HOA may want design approval first. We can help you figure out what applies to your street.
Yes. We offer late-afternoon and early-evening windows for Highland Park homeowners, and you’ll get a live arrival time you can track from your phone. Everything is confirmed in writing before the visit, so you’ll know who’s coming, when they’ll arrive, and what the job will cost before any work starts.
If your gate is acting up in Highland Park, call Calder Gate Repair at (903) 417-0793. A live person answers around the clock, and every job comes with a written price upfront and the 365-Day Done Right Promise – if the repair fails within a year, we return at no charge.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.