Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Haslet, TX
Haslet sits right where North Fort Worth starts to loosen into wide-open Tarrant County land, and its gates do extra work out here. Big driveways, larger lots, and summer heat that bakes control boards inside metal operator boxes all shape the repair calls we take. Calder Gate Repair handles gate repair in Haslet, TX with written pricing before any work starts and a 365-Day Done Right Promise on every job. If your gate is groaning, sagging, or just dead at the keypad, call (903) 417-0793 and a live person answers.
Why Haslet Homes Are Different
Haslet mixes older ranch-style properties with newer master-planned sections like Northstar and Sendera Ranch, and the gate stock reflects that split. Some homes run original chain-drive openers that are fifteen years past their best day; others have newer smart-capable LiftMaster or Ghost Controls units tied to HOA-mandated access points. The soil here shifts with rain and drought cycles, and a gate post that looked plumb in March can be out of level by August. That movement stresses hinges, latch alignment, and the opener’s limit switches, which tell the gate when to stop moving.
Summer heat is the other local factor. An operator box bolted to a steel post in full afternoon sun can hit 140 degrees inside, and that shortens capacitor life and cooks circuit boards faster than shaded installs. We see more thermal shutdowns in July and August in Haslet than any other time of year. Winter is gentler, but north winds off open pasture push fine dust into chain tracks and photo-eye lenses. A gate that works fine in a garage test can fail in the field out here, which is why every repair gets tested through full open and close cycles before we leave.
Our Main Haslet Services
Most Haslet calls fall into two buckets: the gate itself won’t move properly, or the opener that drives it has quit. Here’s how each works in our area.
Gate Repair in Haslet
A sagging or dragging gate in Haslet usually comes down to post movement, hinge wear, or a wheel assembly that has ground itself flat on the track. We fix all of it, from re-welding broken hinge plates to replacing bent track sections. Soil movement here means we also check the gate’s level and latch alignment, because a repair that ignores the post lean won’t last. We quote the full Gate Repair in Haslet price in writing before starting, so you know the number before any work begins.
Electric Gate Repair in Haslet
Electric gates in Haslet fail in predictable ways: photo-eye sensors misaligned by wind or dust, damaged underground wire runs, or a safety loop that stopped detecting vehicles. We trace the actual fault rather than swapping parts on a hunch. For any electrical fault, we open the circuit and test before touching wire, because line voltage on a gate opener is not a DIY job. See the full picture on our Electric Gate Repair in Haslet page.
Gate Opener Repair in Haslet
When the opener hums but the gate won’t move, or the remote stopped talking to the board, that is opener work. Haslet’s heat makes capacitor and control board failures the two most common issues we repair, followed closely by stripped plastic drive gears on older units. We service Linear, Viking, Ghost Controls, and DoorKing openers and stock common replacement parts locally. Details are on the Gate Opener Repair in Haslet page, including what a typical repair costs before parts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Haslet
Calder Gate Repair is factory-familiar with Linear, Viking, Ghost Controls, and DoorKing gate openers, along with five other major brands. We keep common control boards, capacitors, and remote kits stocked in the DFW area so most Haslet opener jobs are finished in a single visit. See our brands for the full list.
Pricing for Gate Company in Haslet, TX
| Service | Typical range in Haslet |
|---|---|
| Gate opener diagnostics | $89 – $149 |
| Gate opener repair | $180 – $340 before parts |
| Hinge replacement | $120 – $260 per hinge |
| Wheel or roller replacement | $90 – $180 per wheel |
| Track repair or realignment | $150 – $325 |
| Photo-eye sensor replacement | $95 – $185 |
| Control board replacement | $220 – $450 including part |
| Remote or keypad replacement | $75 – $160 |
| Full gate opener installation | $850 – $1,500 |
What pushes a Haslet job toward the higher end of those ranges is usually age and exposure. A rusted hinge on a fifteen-year-old gate takes longer to remove safely, and an opener that has baked in the sun for five summers often needs more than one part replaced. Whatever the number, you get it in writing before a single bolt is turned. The invoice matches the quote.
Neighborhoods We Serve in Haslet
We run calls all over Haslet, from the established lots west of 287 to the newer sections east of the highway. Our dispatchers give you a live, trackable arrival time, and response in the Haslet area is typically same day for repair calls.
- Sendera Ranch
- Northstar
- McPherson Ranch
- Haslet Heights
- Caraway
Service Area – Cities Near Haslet
Beyond Haslet, Calder Gate Repair covers the neighboring Tarrant and Wise County communities with the same pricing and guarantee structure. You can find local pages for Keller, TX, Roanoke, TX, Newark, TX, and North Richland Hills, TX on our site. Dispatch for all of these runs from our Dallas-Fort Worth office, with crews serving Haslet locally.
Serving Haslet, TX - Our Local Coverage Area
We’re based in the Haslet area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Haslet
Most Haslet repair calls are reached same day. When you call, a live person gives you a real arrival time you can track on your phone, not a four-hour window. We text you when the technician is on the way.
Some Haslet HOAs require approval for gate opener replacement or changes to visible hardware. Repairing existing equipment usually does not trigger review, but we recommend a quick check of your covenants. We can adjust the work to match what your HOA allows.
Yes. We book specific arrival windows, and you’ll have the technician’s live location once they are dispatched, so you don’t have to wait around all day. Evening and Saturday slots are available in Haslet for most repair work. Call (903) 417-0793 and we’ll set a time that fits.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haslet Customers Say
"Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A."Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W.