Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Waco, TX
Most gate repair jobs in Waco run between $180 and $340 before parts, and the work is usually scheduled the same week you call. Calder Gate Repair handles everything from sagging driveway gates in Woodway to opener failures in China Spring, with a written price agreed before any work starts. If you’re searching for a gate company in Waco, TX, call (903) 417-0793 and you’ll get a live person, not a voicemail.
Why Waco Homes Are Different
Waco’s housing stock splits into two distinct worlds, and each one shapes gate work differently. The older neighborhoods around Baylor and Austin Avenue tend toward wrought iron and steel gates mounted on brick columns that have settled over decades. The newer developments pushing toward Hewitt, Lorena, and Robinson lean heavily on aluminum frame gates with automatic openers, often matched to HOA design standards that restrict height, color, and even opener noise. We carry parts for both worlds.
Texas heat is the other constant. Summers north of 100 degrees bake circuit boards, crack plastic limit-switch housings, and push undersized opener motors past their rated duty cycle. Waco sees fewer freeze-thaw issues than Dallas or Fort Worth, but the clay-heavy soil across McLennan County moves more than homeowners expect. When a gate starts dragging or the post shifts a half inch, the hinges bind and the opener fights itself until something fails. That soil movement is behind a measurable share of the service calls we run in this area.
Our Main Waco Services
These are the three jobs Waco homeowners call us about most. Each has its own Waco page with pricing, common failures, and what to expect.
Gate Repair in Waco
A gate that scrapes the driveway or won’t latch isn’t a future problem, it’s a security gap tonight. In Waco, we see bent hinge brackets from wind gusts off I-35 corridors, sagging cantilever gates on rural properties, and latch strikes that no longer line up after the clay soil shifted the post. We replace hinges, cut and rehang gates, rebuild bent frames, and get latches closing properly again. Most repairs are done in one visit. Full details are on the Gate Repair in Waco page.
Electric Gate Repair in Waco
Electric gates fail in patterns. Photocells get dirty or misaligned. The loop detector stops sensing the car. Wiring at the hinge flex point cracks after thousands of open-close cycles. We trace these down methodically, replacing safety edges, receivers, keypads, and buried loop wire where needed. Waco’s heat is hard on control board capacitors, so we stock the common replacements rather than making you wait on a shipped part. Learn more on our Electric Gate Repair in Waco page.
Gate Opener Repair in Waco
When the opener hums but the gate doesn’t move, or the remote stopped working overnight, it’s usually the board, the capacitor, the limit switch, or a stripped gear inside the unit. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. No “all brands” claim, just the specifics. If a repair doesn’t make sense on an older unit, we’ll tell you that plainly. The costs and common failures are detailed on our Gate Opener Repair in Waco page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Waco
Our Waco trucks carry parts for FAAC, Linear, and Viking openers, plus universal receivers and safety-edge components that fit most residential systems. We keep the common control boards and remotes stocked locally, so many opener repairs are completed the same day we diagnose them. See the full list on our brands page.
Pricing for Gate Company in Waco, TX
| Service | Typical range in Waco |
|---|---|
| Gate Repair (service call + labor) | $180 – $340 |
| Electric Gate Repair (diagnostic included) | $220 – $450 |
| Gate Hinge Replacement | $150 – $400 per hinge set |
| Gate Post Straightening | $250 – $700 |
| Gate Wheel Replacement | $90 – $220 |
| Gate Opener Gear/Drive Replacement | $180 – $420 |
| Circuit Board Replacement | $250 – $650 |
| Remote/Keypad Reprogramming | $75 – $150 |
| Safety Sensor Alignment/Replacement | $120 – $300 |
Prices drift upward in Waco when a gate has been ignored for a while, when the post has settled badly enough to need re-setting, or when the opener is an older model that needs a discontinued board. The price we quote at the door is the price on the invoice. Nothing gets added after the fact.
Neighborhoods We Serve in Waco
We cover all of Waco and the surrounding McLennan County communities. Our average response time across the Waco area is same-day or next-day for most repairs.
- Woodway
- China Spring
- Hewitt
- Robinson
- Lorena
Service Area – Cities Near Waco
Our Waco crews also run calls in the communities around the county line. If you’re in Cleburne, TX, Keene, TX, Waxahachie, TX, or Alvarado, TX, we can schedule you through the same dispatch team. Call us and we’ll tell you straight whether we cover your street.
Serving Waco, TX - Our Local Coverage Area
We’re based in the Waco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Waco
Most Waco repairs are scheduled same-day or next-day. Emergency calls for security-critical failures, like a gate stuck open, get priority routing. Call (903) 417-0793 and the dispatcher will give you a trackable arrival window before the technician leaves.
Many Waco-area HOAs, especially in newer subdivisions, do require design approval for gate replacement or opener changes. If you have an HOA, check your covenants before scheduling major work. Repairs that match existing hardware typically don’t need approval, but we’ll flag anything that looks like it might.
We cover Waco and the surrounding communities, including Woodway, Hewitt, Robinson, Lorena, China Spring, and the county line areas. If you’re not sure whether we reach your address, call us with the cross streets and we’ll confirm before you book.
When your gate stops working in Waco, call Calder Gate Repair at (903) 417-0793 for a free estimate. A live person answers, the price is in writing before work starts, and every repair carries the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Waco Customers Say
"Booked online. The tech texted his ETA and arrived on time. Gate opener was dead; he replaced the control board and tested the sensors."
- Terry W."Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F.