Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Electric Gate Repair Across Keene
An electric gate that won’t open isn’t just annoying. It traps your car, leaves your property unsecured, and puts your whole morning on hold. Calder Gate Repair fixes electric gate problems across Keene fast, with a written price before any work starts. We know the neighborhoods off Old Betsy Road, the subdivisions along 917, and the large-lot rural properties south toward Cleburne. When your gate stops working, call (903) 417-0793 and a live person answers, day or night. We’ll dispatch a background-checked, uniformed technician with a trackable arrival time, not a vague four-hour window.
Why Calder Gate Repair Is Keene’s Preferred Electric Gate Repair Company
Keene homeowners call us because we show up when we say we will and the invoice matches the quote. Every job carries three non-negotiable guarantees from our Relay Home Co. family: a written price before work begins, a written guarantee on every repair, and a free second visit if the repair fails within the 365-Day Done Right Promise window. We answer the phone with a real human 24/7, not a voicemail tree. Our technicians are background-checked and arrive in uniform with a live, trackable ETA. Nico Alvarez leads our crew and sets the standard: we explain what’s wrong in plain language before we turn a single bolt. You’ll get before-and-after photos and a digital invoice you pay from a link. No phone tag, no surprises.
We’re factory-familiar with the openers Keene homeowners actually have. LiftMaster, DoorKing, Viking, Ghost Controls, Elite, Mighty Mule, FAAC, BFT, Linear. If your gate runs on it, we have probably repaired it this month.
Commercial Gate Operator in Keene
Commercial gate operators in Keene do heavier work than residential units, and they fail differently. We service operators on churches, schools, storage facilities, and gated rural properties across the Keene area. A commercial slide or swing operator that cycles hundreds of times a day wears out limit switches, drive chains, and control boards faster than a home unit. When a Keene business calls us about a gate that stopped mid-cycle, we typically find one of three things: a failed limit switch (the small sensor that tells the gate when to stop), a control board damaged by a power surge, or a drive mechanism out of alignment from years of soil movement on expansive clay.
Operator Diagnostics and Board Repair
We bench-test control boards from Viking, DoorKing, and Elite before condemning them. A surprising number of “dead boards” are actually failed relays or corroded terminal connections. That matters because a rebuilt or repaired board costs far less than a full replacement. When replacement is necessary, we quote the exact part number and a written price before ordering.
UL 325 Compliance Checks
Every commercial gate in Texas must comply with UL 325 entrapment protection standards. We test photocells, reversing edges, and the gate’s force settings as part of every commercial repair. If the operator was installed before current code, we’ll tell you honestly what it needs and what each option costs. No scare tactics, just facts.
Automatic Gate Repair in Keene
Automatic gate repair in Keene spans two very different realities. In the newer residential subdivisions, we mostly see belt-drive and chain-drive swing openers on decorative steel gates. On the rural properties south and east of town, we see solar-powered Mighty Mule and Ghost Controls openers on pipe-and-wire farm gates. Both fail, but for different reasons. Suburban systems usually fail from power surges, keypad wear, or sensor misalignment. Rural solar systems fail from dust-covered panels, depleted batteries, and charge controllers that stop charging after a few cloudy weeks.
Swing Gate Motor and Hinge Repairs
The motor is rarely the real problem on a sagging swing gate. On Keene’s expansive clay, the hinge post footing shifts with every wet-dry cycle, and the gate starts dragging. We re-level gates, reinforce post footings, and test the motor under load before deciding what actually needs replacing. You pay for the fix, not the guess.
Keypad, Remote, and Sensor Repair
If your keypad stopped accepting your code or your remote died, we can usually diagnose it in one visit. We program remotes, replace keypad batteries and contacts, and align safety photocells so your gate closes without false-triggering on debris. Most of these repairs run under $200 in Keene and take less than an hour on site.
Trusted Brands We Service in Keene
We’re trained on nine leading gate opener brands, and we stock common parts for the ones Keene homeowners use most. LiftMaster slide and swing operators are the most common suburban units we see. DoorKing and Viking appear on many commercial properties and older estate gates. Ghost Controls and Mighty Mule dominate the solar-powered rural market. Elite shows up on higher-end residential installs. Because we carry these parts locally, we can often repair a Keene gate in one visit instead of waiting days for a shipped component. Call (903) 417-0793 and tell us the brand on your operator. We’ll tell you over the phone what we are likely looking at.
Common Electric Gate Repair Problems We See in Keene Homes
- Sagging swing gates with failed hinge post footings. Keene’s clay soil expands and contracts with moisture, slowly shifting posts out of level. The gate panel often looks fine, but the post has moved. We fix the footing, not just the gate leaf.
- Solar opener batteries and charge controllers dying on rural properties. Panels get shaded by trees, covered in dust, or angled wrong after wind. The battery stops holding charge, and the gate won’t move. We test the full solar circuit and replace only what has failed.
- Loop detector and photocell false triggers after storms. Debris and standing water across the driveway apron after a Keene thunderstorm can confuse loop detectors and block photocell beams. The gate refuses to close or reverses for no obvious reason. We clean, realign, and retest the whole safety circuit.
- Control board failures from power surges. Keene’s rural and semi-rural electrical grid has its share of surges, especially during storm season. A board that took a spike may work intermittently and then quit entirely. We test boards under load and replace with the correct model for your operator.
Pricing for Electric Gate Repair in Keene, TX
Electric gate repair in Keene typically runs $140 to $380 for the labor portion of most residential repairs before parts. Keypad replacement or reprogramming lands between $120 and $190. Remote programming runs $60 to $110. A safety sensor or photocell replacement costs $110 to $220. Control board rebuilds start around $180, while full board replacements run $260 to $450 depending on brand. Commercial operator repairs start at $290 and go up based on the unit. You always get a written price before any work starts. The invoice matches the quote. Always.
We Also Serve Cities Near Keene
Our crews regularly run across Johnson County. If you’re in Keene or just outside town, we also cover Cleburne, Joshua, Alvarado, and Burleson. Same written-price guarantee, same 24/7 live phone answer, same trackable arrival. If your gate motor is acting up and you live anywhere nearby, call (903) 417-0793 and get on the schedule.
Serving Keene, TX - Our Local Coverage Area
We’re based in the Keene area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Keene
Your gate is most likely stopping halfway because the motor is hitting an obstruction or a safety sensor is false-triggering. On Keene’s clay soils, a shifted post or a dragging gate leaf often trips the motor’s built-in force limiter. We check post level, motor force settings, and the safety photocell alignment to find the actual cause. Call (903) 417-0793 and we’ll walk you through the most likely culprits.
Yes. Under UL 325, every automatic gate in Keene must have entrapment protection: a reversing edge, photocells, or both depending on the gate type and installation date. We test entrapment protection on every repair we perform. If yours is missing or nonfunctional, we’ll quote exactly what compliance requires.
Yes. LiftMaster and DoorKing are two of the brands we service most in Keene. We carry common parts for both and can usually complete a repair in one visit. We also work on Viking, Elite, Ghost Controls, Mighty Mule, FAAC, BFT, and Linear operators. If you tell us the brand and model over the phone, we’ll tell you what replacement parts are typically needed.
A proper automatic gate installation in Keene includes a correctly sized concrete footing for every post, the power run or solar charging system, the operator itself, safety edges and photocells, and full reversal testing. Rushing any one of those steps causes the failures we repair every week. We schedule installations with measured timeframes, never same-day promises, and every install comes with a written price before work starts and the 365-Day Done Right Promise. Call (903) 417-0793 for a free measure and written estimate.
Most residential electric gate repairs in Keene cost between $140 and $380 in labor, before parts. Keypad work runs $120 to $190. Sensor replacement runs $110 to $220. Control board replacement runs $260 to $450. You’ll always get a written price before work begins, and the final invoice matches that number. Call (903) 417-0793 for a free estimate on your specific problem.
If your gate is down, don’t wait. Every hour it sits open is an hour your property isn’t secure. Our Electric Gate Repair team covers Keene with real arrival times, written pricing, and work guaranteed for a full year. Call Calder Gate Repair at (903) 417-0793 and talk to a live person right now.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Keene and Johnson County.