Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in San Antonio, CA | Calder Gate Repair
Electric Gate Repair in San Antonio for Ghost Controls typically costs $180 to $340 for most common failures, and we diagnose most operator issues the same day. We’re an independent Ghost Controls service provider, not a manufacturer affiliate, which means we repair what’s actually broken instead of pushing a full replacement. What makes our Ghost Controls work different in San Antonio is simple: soil here moves. Expansive clay shifts posts, and shifted posts eat arm brackets for breakfast. The operator is rarely the first thing to fail around here. Call us at (903) 417-0793 when your opener starts acting up, and Nico Alvarez or one of our techs will give you a straight answer before anything gets unbolted.
We service every Ghost Controls system sold in the last decade, from TSS1 single-swing kits to HDP2 heavy-duty duals and solar-ready SP models. If it opens a gate and says Ghost Controls on the cover, we’ve seen it fail in ways unique to San Antonio.
Why San Antonio Residents Choose Us for Ghost Controls Service
Ghost Controls operators have a particular personality. The DIY kits are approachable, but the control boards are sensitive to moisture and power irregularities, and the arm brackets assume the post stays exactly where you planted it. In San Antonio, that assumption fails often. We know these quirks because we’ve worked on Ghost Controls units across this city for long enough to predict which part is failing before we even open the cover.
Nico Alvarez founded Calder Gate Repair after spending nearly two decades chasing intermittent electrical faults across Los Angeles County. The lesson stuck: most gate companies guess, and then they bill you for the guessing. We don’t. Our techs carry Ghost Controls-compatible diagnostics tools, OEM boards and arms where they matter, and aftermarket batteries and solar panels where the OEM option is overpriced or discontinued. You get a written price before work starts, and a 365-Day Done Right Promise on every repair. If the repair fails within a year, we return at no charge. That’s a promise in writing, not a line on a flyer.
For full Ghost Controls sales & service details across all models and accessories, we maintain current inventory and training on the entire product line.
Common Ghost Controls Gate Repair Problems We Solve in San Antonio
These are the failures we see week after week in San Antonio, and they almost always trace back to how this city’s soil, heat, and humidity interact with the equipment:
- Control board corrosion after summer downpours. San Antonio’s humid summers and sudden heavy rains push moisture into outdoor control housings. Ghost Controls boards have conformal coating, but it degrades after a few years of exposure. Symptoms are random opening cycles, unresponsive remotes, or a board that just quits. We test the board on-site and replace with OEM when available.
- Arm bracket fatigue from shifting posts. Expansive clay under San Antonio causes gate posts to drift seasonally. A Ghost Controls arm mounted rigidly to a shifting post bends at the bracket until it cracks or binds. This is the single most common failure we repair here, especially on older swing gates. We often fabricate reinforced plates or relocate mounts to stop the cycle of repeat failures.
- Solar battery degradation after triple-digit summers. Ghost Controls SP1 and SP2 solar systems rely on sealed lead-acid or lithium batteries. Repeated 100°F-plus heat waves in San Antonio cook those batteries well before their rated lifespan. The gate stalls mid-cycle or moves at half speed. We stock replacement batteries rated for high-heat operation.
- Remote and keypad signal interference. Dense newer subdivisions in San Antonio pack a lot of Wi-Fi routers and smart home gear close together. Ghost Controls remotes run on a frequency that gets walked on by neighboring networks. If your remote works fine at three feet but not thirty, interference is the usual suspect. We can adjust antenna orientation or swap to a less congested channel where the hardware allows.
- Motor strain from misaligned dual gates. HDP1 and HDP2 dual systems are pull-to-open designs that need both gate leaves to travel true. When one post settles differently than the other, the master arm does double duty and the motor overheats. We hear the noise before the motor dies, and we’d rather catch it early than replace the motor after it’s burned out.
Ghost Controls Service in San Antonio: What Local Conditions Mean for Your Equipment
The steepest concentration of Gate Repair - San Antonio calls we run comes from the Historic District, especially around King William. Homes there often sit on limestone foundations or have gates mounted on masonry pillars that predate any modern opener hardware. Standard Ghost Controls post brackets don’t fit those pillars without serious risk, and plenty of homeowners have found out the hard way that drilling into old limestone invites cracks. We fabricate custom stainless steel mounting plates for exactly this situation. The plate spreads the load across the pillar face instead of concentrating it at two bolt holes. It is a San Antonio problem specifically, not something you’d encounter in a city built on flat coastal land or soft loam. Newer subdivisions around San Antonio with welded metal or pressure-treated posts can take a direct bolt-up, but a gate on King William stone is a craft job, not a kit job.
We recently repaired a Ghost Controls TSS1 single-swing opener in King William where the gate was misaligned after the homeowner’s limestone pillar shifted slightly. Our tech replaced the bent arm bracket with a custom-fabricated stainless steel mount, realigned the gate, and updated the control board firmware to stop signal dropouts. The gate cycles smoothly now, and that homeowner avoided a full pillar rebuild that would have cost several times the repair.
Ghost Controls Models & Products We Service in San Antonio
We cover the full Ghost Controls lineup in San Antonio, including:
- DIY Gate Opener Kits: TSS1 and TSS2 single-swing, DTP1 and DTP2 dual-swing.
- Heavy-Duty Dual Gate Openers: HDP1 and HDP2 for long, heavy gates.
- Solar-Powered Gate Openers: SP1 and SP2, with panel and battery diagnostics.
- Accessories: Wireless keypads, remotes, safety sensors, and push-button controls.
When we open a Ghost Controls unit, we check compatibility before swapping anything. Some repairs call for OEM parts because the protocols are too finicky for substitutes, like control boards and arm logic. Other parts are smarter to source aftermarket, especially batteries for the solar models and gears that have improved since the original design. We’ll tell you which is which and why. If you’re on the fence about repair versus replacement, we’ll give you an honest number for both and let you decide based on facts, not fear. You can also see how we handle the same brand in other metros by checking our Ghost Controls service in San Diego page for comparison.
Ghost Controls Service Pricing in San Antonio
Most Ghost Controls gate opener repairs in San Antonio run $180 to $340 before parts, depending on what’s failed. A straight arm bracket replacement on a TSS1 is on the low end. A control board rebuild or replacement on an HDP2 dual system is on the high end. Solar battery replacements on SP models typically land in the $150 to $250 range including the battery.
Every job includes a written price before any work starts, a written guarantee on the repair, and our 365-Day Done Right Promise: if the repair fails within a year, we return free. What drives the cost is parts, access, and whether we’re diagnosing one issue or several. The initial visit is always a diagnosis. You’ll know the number before we turn a single wrench. Call (903) 417-0793 for a free estimate, and we’ll quote an exact price over the phone whenever possible.
Serving San Antonio, FL - Our Local Coverage Area
We’re based in our San Antonio service area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in San Antonio
Yes. A power surge in San Antonio, often from storms kicking through during spring, can fry the voltage regulator or relay circuit on a Ghost Controls board. We test the board on-site to isolate the damage. In many cases, we repair the board by replacing the failed components at a fraction of a full board replacement. If the board is beyond repair, we source an OEM replacement and install it the same visit. Call (903) 417-0793 and describe what happened. We’ll tell you what it’s likely to cost before we send anyone out.
We do. SP1 and SP2 solar units are common here because many San Antonio properties have detached gates with no nearby power. We test the panel output, battery condition, and charge controller. The most frequent issue is battery degradation from the heat, which we address with high-temperature-rated replacements. Estimates are free, and the price is agreed before work begins.
Yes. Ghost Controls openers accept accessory inputs for keypads, push buttons, and some intercom relay functions. We check your existing hardware’s output voltage and signaling style, then wire it to the Ghost Controls control board correctly. If your intercom uses a protocol the board doesn’t speak natively, we’ll tell you what adapter or relay makes it work, and what that costs before we order anything.
Intermittent remote function in San Antonio is usually frequency interference, not a failing remote. Crowded Wi-Fi environments, smart home hubs, and even some security cameras transmit on overlapping frequencies. We can test signal strength at your gate and, where the equipment allows, adjust antenna routing or switch to a less congested frequency. If the remote hardware itself is dying, we’ll tell you that too. Call (903) 417-0793 for a free phone consult before scheduling anything.
Once a year is right for most San Antonio properties, and twice a year if your gate is on clay soil that shifts noticeably between wet and dry seasons. Annual service includes checking arm bracket alignment, board condition, battery health on solar units, and gear lubrication. Catching a bracket crack early is a hundred-dollar fix. Waiting until it snaps is usually a lot more.
Service Areas Near San Antonio
Calder Gate Repair serves San Antonio and surrounding areas throughout South Texas. If you need Ghost Controls service outside the city limits, reach out and we’ll let you know coverage. For branded service elsewhere, our Ghost Controls service in Dallas page covers the metroplex region. Our broader San Antonio service area page lists all neighborhoods we cover.
Book Your Ghost Controls Service in San Antonio Today
Tell us what your gate is doing and we’ll tell you what it’ll cost, before we touch anything. Call (903) 417-0793 for a free estimate, same-day diagnosis in most cases, and a written price before any work starts. Nico Alvarez and the Calder Gate Repair team are ready to get your San Antonio gate moving again.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving San Antonio since 2009.