Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fort Worth, TX
Calder Gate Repair is a gate company serving Fort Worth, TX, and we’re the call to make when your driveway gate stops cooperating. Most Fort Worth gate repairs take under two hours once we’re on site, and you’ll always know the exact price before we turn a single bolt. Whether your gate is dragging on its track, the opener is humming but nothing moves, or a weld has split after years of Texas sun, call us at (903) 417-0793 and a live person picks up, day or night.
Fort Worth gate work has its own character. Heavy clay soil shifts with wet-dry cycles and slowly pulls gate posts out of alignment. Summer heat bakes opener circuit boards inside metal housings. And many of the city’s newer subdivisions were built with decorative steel gates that look great but were never spec’d for the wind loads that sweep across the open prairie west of Loop 820.
Why Fort Worth Homes Are Different
Fort Worth’s housing stock runs from 1920s bungalows in Arlington Heights and Mistletoe Heights to 400-home master-planned subdivisions in Walsh and Chisholm Trail Ranch. That spread matters for gate work. Older homes often have swing gates hung on posts set in shallow footings, and after decades of clay expansion and contraction, those posts lean. We see it constantly in the Ryan Place and Berkeley neighborhoods, where a gate that scraped the driveway last summer now hangs a full inch lower.
Newer construction brings the opposite problem: long runs of ornamental iron driveway gates in communities near Benbrook Lake and along the Chisholm Trail Parkway corridor, where open terrain means wind loads push gates hard against their operators. An opener rated for a 600-pound gate works fine in a sheltered courtyard but struggles when a north Texas front blows in at 40 miles an hour. Fort Worth gets those fronts in spring and fall, and they’re hard on gear racks, hinges, and limit switches – the small sensors that tell the gate where to stop.
The other Fort Worth factor is heat. July and August put 110-degree surface temperatures on black iron gates and the control boxes mounted beside them. Circuit boards inside those boxes fail faster here than in most of the country. The good news is we stock replacement boards for FAAC, BFT, and Linear openers on our local trucks, so a heat-fried board usually doesn’t mean waiting a week for a part.
Our Main Fort Worth Services
Fort Worth homeowners call us most about two things: a gate that won’t open or close at all, and an electric opener that stopped responding. Here’s what each one involves locally.
Gate Repair in Fort Worth
A gate that scrapes, sags, or refuses to latch is a repair job. Gate Repair in Fort Worth typically starts with finding why the gate moved out of alignment in the first place, which in most Fort Worth neighborhoods comes back to shifting clay soil and post footings that weren’t deep or wide enough. We re-set posts, re-weld cracked hinge points on ornamental iron, replace worn rollers on sliding gates in places like Saginaw and White Settlement, and adjust the latch so it actually catches. Most jobs run two to three hours on site, and every repair carries the 365-Day Done Right Promise in writing. If it’s not right, Calder makes it right.
Electric Gate Repair in Fort Worth
Electric Gate Repair in Fort Worth is about the moving parts and the brains: the operator arm, the control board, the safety sensors, and the power feed. When an electric gate stops mid-swing or opens but won’t close, it’s usually a sensor that’s out of alignment, a capacitor that’s given up, or a board that cooked in a Fort Worth summer. We test the system end to end and quote the fix in writing before anything starts. Every electric gate repair includes a free second visit if the repair fails within 365 days. No fine print. No exceptions.
Gate Opener Repair in Fort Worth
Gate Opener Repair in Fort Worth covers the operator itself, not just the gate. If your remote stopped working, the keypad won’t accept your code, or the opener runs but the gate doesn’t move, that’s the opener. We’re factory-familiar with Viking, Linear, BFT, FAAC, and the other major brands homeowners actually own, so we diagnose and fix rather than telling you to replace. Many opener repairs are under $300 in Fort Worth before parts, and you’ll know your exact number before we touch a screwdriver.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
We work on the openers you actually have: FAAC rams and swing arms, BFT control boards, Linear actuators and remote systems, Viking operators, and the rest of the nine brands we service daily. Our trucks carry common boards, sensors, remotes, and capacitors for these systems, so many Fort Worth repairs finish the same day. See our brands for the full list.
Pricing for Gate Company in Fort Worth, TX
Here’s what Fort Worth homeowners can expect before parts, based on the work we do most often in the city:
| Service | Typical range in Fort Worth |
|---|---|
| Basic gate repair | $180 – $340 |
| Electric gate repair | $240 – $470 |
| Gate opener repair | $200 – $420 |
| Full operator replacement | $900 – $2,300 |
| Control board replacement | $350 – $850 |
| Safety sensor replacement | $180 – $320 per set |
| Post re-setting | $400 – $1,100 per post |
| Gear rack replacement | $500 – $1,200 |
| Hinge re-weld | $150 – $400 per hinge |
What pushes a Fort Worth job toward the top of those ranges? Post replacement on a gate that’s been sagging for years, decorative iron that needs custom fabrication, or an opener board that’s specific to an older FAAC model and has to come from a regional supplier. What keeps it predictable is this: every single job gets a written price before work starts, and the number on your invoice is the number you agreed to. That’s the Relay Standard, and it’s not optional.
Neighborhoods We Serve in Fort Worth
We run calls across Fort Worth every day, from the older brick neighborhoods inside Loop 820 to the newest developments pushing west toward Parker County. Here are some of the neighborhoods we’re in most weeks:
- Arlington Heights
- Ryan Place
- Chisholm Trail Ranch
- Walsh
- Benbrook
If you’re anywhere in Fort Worth, we’ll get a technician to you, usually within a couple of hours for a gate that won’t close. You’ll get a live arrival time you can track, not a four-hour window and a hope.
Service Area – Cities Near Fort Worth
Calder Gate Repair serves Fort Worth and the surrounding communities in Tarrant County and beyond. If you’re just outside the city, we also cover Haltom City, TX, North Richland Hills, TX, Hurst, TX, and Kennedale, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews are stationed locally, so we reach all of these cities without a long wait.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Worth
Most gate repairs in Fort Worth are scheduled the same day, and a gate that won’t close is treated as urgent because it’s a security gap, not just a nuisance. Call (903) 417-0793 and a live person books your appointment and gives you a trackable arrival time. In most of the city, we can have a technician there within two to three hours.
It depends on your community. Many Fort Worth HOAs, especially in newer subdivisions like Walsh and Chisholm Trail Ranch, require approval for changes to the gate itself, but repairs that keep the original gate stay clear of most rules. We’ll tell you what we see from your HOA’s guidelines on the day of the estimate, and we’ll match the existing style whenever we’re replacing a post or a hinge.
We cover all of Fort Worth, from the north side around Saginaw and Haslet to the south side above Crowley and Burleson. That includes the neighborhoods inside Loop 820, the Alliance corridor, and the newer developments west of downtown. If you’re not sure whether your address is in our service area, call (903) 417-0793 and we’ll confirm it in about a minute.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.