Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Austin?
Gate repair in Austin typically costs between $185 and $650, with most single-gate repairs landing around $240 – $380. A simple sensor realignment or remote-programming fix can be as low as $150, while a failed control board, rusted hinge replacement, or opener motor rebuild pushes toward $600 and up. If you’re staring at a gate that won’t open, won’t close, or moves in jerks and stops, the number below is for you, and we put it in writing before any work starts.
Calder Gate Repair handles gate repair, electric gate repair, and gate opener repair across Austin, from the hills out west to the flat neighborhoods on the east side. We’re part of the Relay Home Co. family, operating independently in Austin, and we work on the nine opener brands you’re most likely to own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Live person answers every call, 24 hours a day. That’s (903) 417-0793.
Gate Repair Cost Breakdown (2026)
These ranges reflect what Austin homeowners actually pay for common jobs, parts and labor together. No diagnostic fee is added on top when you approve the repair.
| Repair | Typical Cost (Parts + Labor) |
|---|---|
| Safety sensor realignment or replacement | $150 – $280 |
| Remote / keypad reprogramming | $95 – $165 |
| Hinge, roller, or hardware replacement | $180 – $340 |
| Gate opener motor repair (LiftMaster, Mighty Mule, etc.) | $280 – $540 |
| Control board replacement | $320 – $620 |
| Limit switch – the small sensor that tells the gate when to stop – replacement | $175 – $320 |
| Slide gate track or wheel repair | $240 – $480 |
| Wiring repair (underground or control-box) | $260 – $700 |
| Full opener replacement (parts + labor) | $750 – $1,900 |
What pushes a bill toward the top of these ranges? Underground wiring faults, a control board that’s discontinued and needs a compatible substitute, or a gate that was installed years ago with a cheap actuator now failing in Austin’s heat. What keeps a bill low? A problem we can solve in a single visit: a jammed limit switch, a misaligned photo-eye, a remote that lost its rolling code after a power surge. We quote in writing before a bolt gets turned, and the number on the invoice matches the number you agreed to at the door. The home page explains how our gate repair service works start to finish.
What Affects Gate Repair Pricing in Austin
- Opener brand and parts availability. A LiftMaster or DoorKing commercial-grade unit uses parts we stock or can order fast. A lesser-known brand can add a day or two and a parts premium. We’re factory-familiar with all nine major brands, which means fewer guesswork hours billed to you.
- Gate type: swing, slide, or solar. Slide gates carry more mechanical parts (track, wheels, chain) so repairs trend higher. Solar-powered gates common on rural properties outside the city, out toward Dripping Springs and Manor, add battery and charge-controller costs to the job.
- Access and wiring. A control box buried behind landscaping or a run of underground cable chewed by a Hill Country armadillo takes longer to reach and diagnose. Access time is real time, and we tell you when it’s a factor.
- Age and rust. Austin’s humidity and the occasional hard freeze take a toll. Older gates with pitted hinges or rusted rollers often need several parts replaced together rather than one.
- Emergency or after-hours timing. Gates stuck open at 9 pm are a security problem, and we answer that call. Standard-hours work stays cheapest; after-hours dispatch costs more because we’re pulling a technician out of rotation.
- Whether the fix is repair or replacement. When an opener is past its service life, replacing it can cost less over three years than three separate repairs. We’ll show you both numbers instead of guessing.
Residents in Hyde Park and Travis Heights with older homes often have manually converted gates running vintage openers; those jobs sometimes need a control-board substitute that changes the price more than the labor does. Up in Round Rock and Cedar Park, newer subdivisions tend to have LiftMaster and Linear systems under a decade old, so repairs stay on the lower end. It pays to know which situation you’re in before you get a quote. Our electric gate repair team handles the electrical side, and for opener-specific issues see gate opener repair.
How to Save on Gate Repair
You don’t need to cut corners to keep the bill down. A few practical moves:
- Get the written price before work starts. This is our standard, not a favor. Ask for it if anyone skips it. A written price is the difference between a quote and a mystery.
- Address the small stuff early. A $95 remote reprogramming today can prevent a technician from finding a fried control board later. Listen to the odd click or slow response.
- Repair before replacement when it makes sense. If the motor and board are healthy, replacing one worn limit switch or hinge set is far cheaper than a new opener.
- Keep the area around the control box clear. Trimmed landscaping means faster diagnosis, which means less billable time.
- Ask about bundled repairs. If two or three things are failing, fixing them in one visit usually costs less than three call-outs.
Every Calder repair carries the 365-Day Done Right Promise: if the repair isn’t right, we make it right, backed in writing, with a free second visit if the repair fails inside 365 days. That’s included on every job, not an add-on. Estimates are free, so there’s no reason to guess. Call (903) 417-0793 and we’ll give you a real number.
FAQs – Gate Repair Cost
How much does it cost to repair a gate in Austin?
Most Austin gate repairs run $185 to $650, with the typical job around $240 – $380. Sensor and remote fixes sit at the low end; control boards, wiring, and opener replacements sit higher. Call (903) 417-0793 for an exact quote on your gate – the estimate is free.
Is it cheaper to repair or replace a gate opener?
Repair is almost always cheaper upfront: a $280 – $540 motor or board fix versus $750 – $1,900 for full replacement. But if the opener is over a decade old and this is the third repair, replacement usually wins on cost per year. We’ll price both and let you decide. Call (903) 417-0793 and we’ll run the numbers.
Do you charge a diagnostic or trip fee?
No separate diagnostic fee is added when you approve the repair. You get a written price before any work starts, and that’s the number you pay. Call (903) 417-0793 to schedule.
How long does a gate repair take?
Most single-visit repairs finish in 60 to 120 minutes. Control-board and underground-wiring jobs can take longer, sometimes a second appointment if a part has to be ordered. We give you a live, trackable arrival time so you’re not waiting on a vague window. Call (903) 417-0793.
Can you come today for an emergency repair?
In most cases, yes. Gates stuck open or locked shut get priority, and a live person answers 24 hours a day, seven days a week to book, update, or troubleshoot on the spot. Call (903) 417-0793 and we’ll tell you the soonest arrival.
Why Austin Homeowners Call Calder
We’re the gate repair specialist inside the Relay Home Co. family, independently owned in Austin and founded on a simple standard: know who’s coming, know when they’ll arrive, know exactly what the job costs before it starts. That’s The Relay Standard – a live arrival time, before-and-after photos, and a digital invoice you pay from a link. Technicians arrive background-checked and in uniform, and every repair carries a written guarantee plus the 365-Day Done Right Promise.
We repair LiftMaster and Mighty Mule openers in the same week we rebuild a FAAC or DoorKing commercial unit, so if your gate has a brand name on it, chances are we know it. Whether you’re in Mueller, East Austin, Pflugerville, or out past Bee Cave, we cover the metro. If you’d rather read up first, our guides on gate repair cost in Austin, gate opener repair cost, and electric gate repair cost break the numbers down further. For nearby coverage, see our Round Rock gate repair, Cedar Park gate repair, Pflugerville gate repair, Georgetown gate repair, San Marcos gate repair, Kyle gate repair, Leander gate repair, and Buda gate repair pages.
Got a gate that’s misbehaving right now? Call (903) 417-0793 for a free estimate. A real person picks up, we give you a written price, and if the repair isn’t right within 365 days, we come back at no charge. That’s the whole deal.
Written by Nico Alvarez, Owner at Calder Gate Repair, serving Austin since 2009, backed by the Relay Home Co. family.
Pricing reflects the Austin market as of 2026. Calder Gate Repair offers free estimates – call (903) 417-0793.
What Our Customers Say
"Keypad and remotes reprogrammed in one visit. Paid by link."
- Pauline C."Good job on the motor. Part took a few days to arrive, but the updates came by text."
- Oscar J."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.